How to Replace Front CV Axles 2000-2006 Toyota Tundra

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install a new front CV axle from TRQ on your 2000-2006 Toyota Tundra. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obnm/1A...
• Pry Bar 1aau.to/oVe/1AX...
• 10mm Socket 1aau.to/obeA/1A...
• 12mm Socket 1aau.to/obyQ/1A...
• 17mm Socket 1aau.to/obyQ/1A...
• 19mm Socket 1aau.to/oajB/1A...
• 21mm Socket 1aau.to/oajB/1A...
• 35mm Socket 1aau.to/oan/1AA...
• Brake Caliper Hanger 1aau.to/ojf/1AX...
• Pliers
• Side Cutters
• Ratchet 1aau.to/obEf/1A...
• Socket Extensions 1aau.to/obyQ/1A...
• Torque Wrench 1aau.to/oaH8/1A...
• Drill Bit Set 1aau.to/oay/1AX...
• Gloves 1aau.to/oadz/1A...
• Safety Glasses 1aau.to/o6D/1AX...
• Chisel 1aau.to/okN/1AX...
• Drain Pan 1aau.to/oAy/1AX...
• Floor Jack 1aau.to/o73/1AX...
• Hammer 1aau.to/oVd/1AX...
• Jack Stands 1aau.to/oVE/1AX...
• Punch
• Rubber Mallet 1aau.to/og3/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@victoriasadtler5356]

"Remove the rotor"..... WHAP! 😂
Thanks for the video and the sneaky humor, I saw that 😂

[@devinheinle6483]

How you managed to get any of those bolts out without snapping them is beyond me... great video though!

[@josephchlewicki8005]

Man - I thought I had rust under my truck… This poor truck should’ve been undercoated Years ago!
Thankyou for showing the process - especially give the nut sizes -that helps a lot!

[@steviewonder105]

Thanks for the video! I bought a 2003 Tundra, and on the FIRST day of ownership, the castle nut on the lower ball joint fell off and dropped the truck, taking out the front axle in the process. Your video helped me get the truck back on the road!

[@TRQ]

+@steviewonder105 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@neverdie8]

Thank you for saying all the torque specs

[@DocHolliday3841]

Those new CV Axles are going to outlast this Rusty pile!

[@Tsarkovsky]

Is this the same cv axle for sequoia?

[@bigsmoot6]

Thanks for the vid. Your channel rocks!!!

[@Tundra_man]

Can you guys please do fluid exchange videos, thanks!

[@joshuarhodes9022]

Should we replace the seals

[@bvictory5698]

Question!: my lower ball joint broke, bad failure. Luckily I wasn’t moving fast. When tow truck picked it up the axle popped out, ripped out. Should I order a new one or can you them back together? The round box you pry out of the trans is still attached and I can see giant bearings in it, is this salvageable?

[@TRQ]

+@bvictory5698 We would recommend purchasing a new one altogether to avoid future failure.

[@KapnHook]

What about the fluid leaking out at 6:05? What is that and do you need to top it off?

[@martinfromseacity2010]

Thanks good job

[@Clorox_Wipez]

PUT TRUCK IN 4WD HI it makes getting the cv axel in 100x easier

[@BuyYourBuild]

jeeeze why not a new rotor too they're like $20

[@michaela1655]

painful to watch you put new parts on that rusty heap

[@scottballin3798]

The guy on Toyota Maintenance youtube channel w/ the Russian sounding accent does a way way better video. You sir forgot to put the blue loctite on lower balljoint bolts.... pretty important

[@joshuarhodes9022]

Should you replace the seals