Super legit! Do you think the Harbor Freight $100 tube bender could get these kind of curves? I've never thought about bending tube before but your build is inspiring. Love the track too. I listened to this album a lot when I was a kid in the 80s and it brought be right back there as soon as soon as I heard the intro. Thanks for sharing, great project!
Thanks for watching , don't waste your money on a tube bender you can bend it around a tree or cut a piece of 3/4" plywood to the shape you want , the tubing was 3/4" bends real easy
Thanks for the super fast reply! Did you use EMT conduit? I learned to braze on EMT conduit making bike trailer years ago. Had to spend a bunch of time sanding off the zinc coating but once the metal was clean it brazed well. I'd probably MIG or TIG it this time around though, way cleaner and faster. Looking forward to more videos for you! Thanks again!
Your design flows with the bikes frame nicely, looks like the factory should build this, I think my design would have the seat lowered to just above the hub, no put down on your design, I love it, I want to steal it..!
Thanks for watching ! love the bat wings on the steampunk bike. something i learned the hard way is the bike should tilt 3 degrees away from the sidecar, make it alot easier to peddle the bike.
@@Jbutbe That tilt you mention will do as you say as to the lean/alignment working well, but it will also save on your tire thread over time, as well. Having driven a Ural sidecar rig for years, it is always a good idea to know such and make use of it. Nice video and great thrill for the kids. I was thinking about doing a trailer for my electric bike and then adding a 55 gal. plastic drum to the trailer to house my dogs like a sidecar. My dogs grew up in my sidecar rig and I love having them as I ride. The hoop-style body you made could also be done about a drum as I am going to use and support it well as well as have some unique style. Probably less weight than a trailer rig when completed, as well. Too bad you don't have clam shells and rigged like a regular Ural sidecar is. That would likely be easier to adjust in the long run, but more cost and assembly to initially do such.
It'd drive me nuts to lean to the side the whole time. The ball bearing thing was genius to mate tubes and end tubes! Funny starts in yard then builds in full steel warehouse ;) with the Boss's approval
thats awesome when I have kids ill be building them all kinds of stuff like this you need to oder 2 electric wheels off Amazon with battery packs and wire it up to where pedaling is only when you run put of juice
Very nice bike build, in my opinion it would be even better With some Electric porpultion. For this would be ideal solution for days With ice on the road, as it increase stability.
My cost was about $50 dollars for paint , new tire, rim and tube . Bike was free and cart was free Actual cost could be as much as $400-$500 New Bike $200 Cart $100 1/2" pipe $40 Paint 3 cans $15 Sheet Metal $20 labor for welding and bending ? $100
A good idea but too many steps left out and skills like welding are needed. Something that can be fixed with a drill, angle grinder, nuts, washers and bolts would be doable for DIY-ers
Третье колесо чуть вперед должно быть, тогда и радиус поворота уменьшается и устойчивость лучше. Тем более оно не ведущее, Мотоцикл с коляской как пример.
Beautiful build! Comfy ride and great use of old bike parts.
You did an awesome job both building and documenting it in camera. Thanks for the video 💯
You did a really good work man!!!CONGRATULATIONS!!
Great idea!!! I LOVE it. You only missed the mudguard
So beautiful. You know your kids will remember you built that bike for them for the rest of their lives.
What an awesome build!! Thanks for sharing : )
That is so cool ! I love a family that is a family and cares. Very creative looks great!
Nice work it came out real cool.
You are a good dad. Your kids will cherish your efforts forever. And Skynard as the soundtrack.😁
Best side ! bravo !
Love it. Great work!
Muy buen trabajo amigo, te felicito
That's the nicest sidecar for a bike I've seen so far
Super legit! Do you think the Harbor Freight $100 tube bender could get these kind of curves? I've never thought about bending tube before but your build is inspiring. Love the track too. I listened to this album a lot when I was a kid in the 80s and it brought be right back there as soon as soon as I heard the intro. Thanks for sharing, great project!
Thanks for watching , don't waste your money on a tube bender you can bend it around a tree or cut a piece of 3/4" plywood to the shape you want , the tubing was 3/4" bends real easy
Thanks for the super fast reply! Did you use EMT conduit? I learned to braze on EMT conduit making bike trailer years ago. Had to spend a bunch of time sanding off the zinc coating but once the metal was clean it brazed well. I'd probably MIG or TIG it this time around though, way cleaner and faster. Looking forward to more videos for you! Thanks again!
3/4" black schd 40 from Home Depot
Very nice, lots of fun to your family and made using some recicled part WOW !
Great design!
so neat! awesome!
Great job man!
Great project and a great soundtrack
Awesome build
Awesome job!
Oh my goodness! I LOVE this! I need one for my dog 😂
NICE JOB, THANKS FOR SHARING. CONGRATULATIONS !!
Gorgeous!
pretty dope!
I make these for a living.. exellent build, my friend!
How much do you charge to built one
Your design flows with the bikes frame nicely, looks like the factory should build this, I think my design would have the seat lowered to just above the hub, no put down on your design, I love it, I want to steal it..!
Nicely done brother, I'm sure it's worthy.I want to do something like this. 👍
We love it!! We just finished a steampunk sidecar, thanks for the video we enjoyed it.
Thanks for watching ! love the bat wings on the steampunk bike. something i learned the hard way is the bike should tilt 3 degrees away from the sidecar, make it alot easier to peddle the bike.
I'm kinda learning the same thing. And making some adjustments. . . . and maybe I'll make another one. Love the way yours came out-great job
@@Jbutbe That tilt you mention will do as you say as to the lean/alignment working well, but it will also save on your tire thread over time, as well. Having driven a Ural sidecar rig for years, it is always a good idea to know such and make use of it. Nice video and great thrill for the kids. I was thinking about doing a trailer for my electric bike and then adding a 55 gal. plastic drum to the trailer to house my dogs like a sidecar. My dogs grew up in my sidecar rig and I love having them as I ride. The hoop-style body you made could also be done about a drum as I am going to use and support it well as well as have some unique style. Probably less weight than a trailer rig when completed, as well. Too bad you don't have clam shells and rigged like a regular Ural sidecar is. That would likely be easier to adjust in the long run, but more cost and assembly to initially do such.
Bewrfl bro 👍🏻👍🏻👍🏻👍🏻👍🏻
Very cool!
did you make coil seat spring ? or buy it where from ? im make a trailer like use speing like that on the wheels
i made it , it is 1" x 3/4" bent in the shape of a U . I cut a 6" pipe 3/4" wide and put it in the center so it doesn't bend down to far,
I knew this was gonna be a great project, just from your music…….Lynerd-Skynerd ! Respect ✊
Very cool.
Really awsome bro. Very very TiGhT....
I made one on each side. With my dad. Now me and my niece and nephew can ride bikes together
Looks good but I expect it is not lightweight - a good candidate for an E wheel boost.
simple, functional and classy....
would you build one for me and my son he is just 2 .. how much it will cost ? i live in Florida
Just brilliant.
this is so cool!!!!
Love it.
awesome
Dios bendiga tus manos y tu arte amigo.
It'd drive me nuts to lean to the side the whole time. The ball bearing thing was genius to mate tubes and end tubes! Funny starts in yard then builds in full steel warehouse ;) with the Boss's approval
You are a good man
Great song
thats awesome when I have kids ill be building them all kinds of stuff like this you need to oder 2 electric wheels off Amazon with battery packs and wire it up to where pedaling is only when you run put of juice
Klasse Arbeit einfach Spitze weiter so schöne Grüße aus Deutschland
complimet very good you work sidecar bike
Excelente bravo🤜🤛
hi can we order this ? this is what i really need now.
This is rockstar cool!
👏👏👏 Congratulations!
Very nice bike build, in my opinion it would be even better With some Electric porpultion. For this would be ideal solution for days With ice on the road, as it increase stability.
Cool enough, maybe a mudguard to keep sensitive little fingers away from that nasty old tyre?
totally agree --- protect those cute little fingers!
and other body parts from rocks, etc
great job!
awsome
Sweet..!
Very nice.
what is the song name in this clip?
Joe why did you put that video of me and tommy in the beginning of the video 😂
sweet
Muito legal gostei parabéns
Any updates on how it is doing?
Looks cool but the kid is on the traffic side. Unless you're in britain or australia...are you?
Approval from the boss so cute I think that's a chihuahua
nice job! on a different topic, could you tell me the name of the song in the video, it's kind of cool. Thanks
Lynyrd Skynyrd , Simple Man
Can u show how u made it
Ficou muito boa
Can u sell one? Pls pls
How much did it cost to make
My cost was about $50 dollars for paint , new tire, rim and tube . Bike was free and cart was free
Actual cost could be as much as $400-$500
New Bike $200
Cart $100
1/2" pipe $40
Paint 3 cans $15
Sheet Metal $20
labor for welding and bending ? $100
smart dog
You can add another passenger seat at the front of that sidecar
Quando costa?
Simple man
I have a boss too
How are you not getting copyright violations with that music?
A good idea but too many steps left out and skills like welding are needed. Something that can be fixed with a drill, angle grinder, nuts, washers and bolts would be doable for DIY-ers
It was nice but find better music.
SKYNYRD!
Третье колесо чуть вперед должно быть, тогда и радиус поворота уменьшается и устойчивость лучше. Тем более оно не ведущее, Мотоцикл с коляской как пример.
mama told me, when i was young. . .
Instead of the music it would have be nice if their was some narrative.
Song?
Do you pay royalties to Lynyrd Skynyrd of Govt Mule?
GREAT music, but too bad it's not the original.
Song?
@@juanalarcon9720 The name of the song is "Simple Man" Which was originally performed by Lynyrd Skynyrd (Van Zant.) This is a cover.
And be a SIIIMMPPLLLEEEEE KKKIIINNNDDD OOOOFFFFF MMMAAN
man muß nur ideen haben
Shouldn't put HOW TO in title!
Rip
Как корове седло.
Looks like a wheelchair
Too bad the video shows almost nothing.
Z