EASY Hyundai Veloster Turbo P2261 Fix!
Вставка
- Опубліковано 8 вер 2022
- Super easy CEL fix for code P2261. My Veloster was plagued with the light coming on and off for years, which caused problems here and there with regards to the annual money waster of an "inspection".
This relatively cheap and easy fix is definitely the way to go.
Tork Motorsports product link:
torkmotorsports.net/products/...
Hey, I'm also going to be creating a channel soon that will have much better content and product giveaways. So if you like cars and making a difference in the world, stay tuned to see what's up! Subscribe so you don't miss it!
Thank you. Just used your video to fix my 2013 Veloster turbo
Glad it helped you out!
I feel this moment now 5:59, mine was rusted in there real good and a pain to get out. Thanks for the video, John, this solved my problem!
Mine had started to rust too! Ended up accidentally breaking one of the arms for the clip that holds it steady. Glad to help!
just installed my MAC solenoid. great tutorial! super easy to follow
Glad it helped!
good video, this is the only one i could find that actually showed an install
Thanks man! Glad I could help!
Thanks for the video!
My pleasure!
good job man great video
Appreciate it!
Hey great video. Where does the hose in 8:53 the one after the inter cooler go connected. I think mine was just loose, I got a replacement piece but I don’t know where the hose goes connected . Does it go to the top black connector or the side black connector on the solenoid. 🙏🏻
hey man! my bad on the late reply, that hose leads up to the blow off / recirc valve.
What spark plugs and coils do you use? Also can you make a video on common problems you have with your veloster and what you did to fix them. I have a veloster and right now I have a ton of codes and honestly have alot of questions. Not sure if you can answer them but nobody around me has a veloster and/or know how to fix it. Also great video!
Thanks! I can try and make a video sometime on that, thanks for the idea! As far as plugs and coils, I have OEM Hyundai coils right now, and have no idea what plugs I'm using. I ordered plugs when I got my ECU tuned, but have since needed it set back to stock (tune wasn't operating right) and the tuner has removed the listing for the tune so I can't even check.
@@johnyeschickjr I used to use the same plugs as the evo. But when my coils went bad I went back to the OEM plugs. I may get an Elantra n when the 2024 drops since this thing is showing it's age
Question I have a p2261 it says bypass valve, I changed the vacuum lines, the issue still going on. When I step on the gas and it reaches 6RPM the car stumbles and stop going, do you have any solutions for that.
Same code I had. I would think it would be your solenoid then, that's the part I replaced in this video. I'm not a mechanic though, so I can't tell you for sure. Here's the link the part I used personally torkmotorsports.net/collections/hyundai-veloster-turbo-2013-2017/products/bov-mac-solenoid
Hi I just ordered from tork motorsports, how long took the shipping?
Ah, I can't remember. I think a week or 2? Did it come in yet?
Do you have a link of where I can find the L shape connectors?
My bad on the late reply! Here you go! EDGE INDUSTRIAL 3/16" Hose ID to 1/8" Male NPT MNPT 90 Degree Brass Elbow Fitting Fuel/AIR/Water/Oil/Gas/WOG a.co/d/iQRiuVa
Home Depot
So my cel is always on and in warmer weather I go into limp mode at higher throttle demands but other than that boost is good im always pushing 22lbs
could be the solenoid, or could be the recirc valve. hard to tell without being there. I'd suggest taking the front bumper off and take off the recirc valve. the inside is made with a rubber diaphragm that's known for having issues (like mine that had at least 5 cracks). If thats the case, start by getting an aftermarket one made with a metal piston inside (I have Turbo Xs and it works well, full metal build).
@johnyeschickjr well dosnt matter know cause it's got a knock after I money shifted and dumped all the oil
Ah man that sucks!
can i have the photo of the 2 pin socket ?
sorry, I don't know what 2 pin socket you're talking about. Do you mean just the connector for the power?
What year is your car? Is it a 1.6L?
Mine's a 2013, and yes it's running the 1.6L turbo
Whats the name of the part
BOV MAC SOLENOID
Here's the one I bought
torkmotorsports.net/products/bov-mac-solenoid