Happy Thursday everyone! I hope you all enjoyed this video and are staying healthy and safe at home. Don’t let a little social distancing stop you from doing what you love most 👍🏻
I know what I was going to say I can relate to you more than ever on polishing aluminum brass and copper it isn't easy I've been polishing not very long I just recently got a sanding wheel for my drill and have just started sanding a few aluminum bars it isn't easy but wow it is awesome when it's done I absolutely love your videos and can relate more than ever now keep making your videos Love them so much it keeps me going ❤️😎✌️
That was a beautiful pour. And I was able to see that amazing blue green glow when that copper is melting. Excellent job all the way around. My fav ring is the skull in the middle at the end. Great video and thanks for sharing. Hope you and yours are safe. 👍
This covid thing has provided me with endless free time. And in that forever I've watched most everything you've made. It's fascinating to witness your skills grow. You're becoming quite the master
I think you'd get a cleaner casting if you heated the mold before pouring the metal. From what I've seen from others, lost wax casting is usually extremely clean, but they always heat their molds before use.
Very Cool. The big skull had some awesome detail, and was spot on! The rings were really good, I liked the star wars one, but the skulls were great too. I seen someone looking for molds yesterday and directed them to your website. Great Video and Stay Safe.
Wow, the level of detail you got out of that plaster was pretty great. Have you ever played with zbrush before? You could probably make some pretty awesome stuff with it.
In the words of Vince McMahon, this is "some good shit" right here. Love that skull and all the rings came it great. Really good video man thanks for the ten minuets of entertainment. Cheers!
Dang, you are getting quiet the workshop over there with those printers and vacuüm stuff. I did not think they would come out that great thinking you did not pour vacuüm. But I have to say, they look great!
I don’t know if you are aware of this trick or not. But get a dowel about 3 inches in circumference and about 12 inches long and taper from about 5 inches to one end. This will secure the ring by a friction hold and keep your hands safely away from the polishing wheel and grinding and sanding. 👍👍👍
try using a vacuum system with your perforated flask when pouring the metal for better results (less porosity, more detail) look into the kaya cast system from arbe
It looked like the copper might be too cold, but everything came out great :) When casting rings, we always see chunky men's rings. Try a delicate girl's ring sometime?
ADAM WHAT DO U MEAN THEY TURNED OUT LOOKING AWESOME I am not much of a ring kind of guy but if I had to choose would b the 1st ring on ur shelf at the end BUT THE SKULL IS THE BEST that SKULL must of taking a long time to clean that up dang it, and I see a few what looks like sum NEW GADGETS u got there 🇨🇦😎👍🇨🇦😎👍🇨🇦😎👍
The rings are awesome. I like the skull with the hat and the star wars one. Cubs was cool, just not a cubs fan lol. The solo skull was awesome that looked like a pain in the ass to clean up though
Good show, but, can't tell the wife, "ohh, I love it, I want it, got to have it, when,when,when!!!!l" Worse than a kid about anything Cubs. Thanks Adam, BTW love the new equipment.
AWESOME BIT OF WORK MATE 😊 THOSE RINGS JUST STUNNING. THE SCULLS EYE SOCKETS I MIGHT HAVE LEFT SOME OF THE PLASTER JUST FOR CONTRAST... ANYWAY ADROCK TOP WORK 😁😎😁☮️❤️🏴💣💥
Cool video ...you can use silicon to make multiple copies out of the originals wax rings when it needed also recommend to make cavity into the skeleton wax then cover the hole after casting .to save copper investment of it and gives the skeleton statue heavier ...is it gypsum mold you used to cover the wax forms ?
hey really enjoyed watching you make the Rings at a copper turned out great. you can use to pour metal and the vessels without a vacuum machine I didn't know that
Great vid lost pla is hard and expensive glad to see someone do a good one, if find a cheaper way to make the investment tho, everything looked brand new, I’m jealous
Great job on the skull and rings but I have a great idea and was hoping u could make it so I can see how it would look plz. A solid brass hand grenade life size and polished tyvm.
Happy Thursday everyone! I hope you all enjoyed this video and are staying healthy and safe at home. Don’t let a little social distancing stop you from doing what you love most 👍🏻
Thanks artbyadock and quick question for when you put the paint on the metal your painting what type of paint are you using
I use magicfly acrylic paint 👍🏻
@@ArtByAdrock thank you so much
Idea...
Have a monthly special?
Hi, you send your products to Colombia?? I want to buy a copper little coin i love your work
Awesome video man you and bigstackD are the gold standard when it comes to melting I've started doing it myself thanks for all your inspiration
That investment casting is way cool! Great Vid! I learned in blacksmith school to always use a metal bucket :)
Mmmm I love me a mixed metal skull 👌🏻😁. Groovy rings too bro 👊🏻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻
Gotta love the skulls 😉🍻🍻🍻 I might as well throw in a ring for you with the rest of the package 👍🏻
That's why I love your channel, you are always trying new stuff. Love the creativity!
Keep them coming man, IL be watching them
*So calming seeing you restore items so masterfully*
You are becoming a steely eyed artist my friend. Great work. Love the Cubbies ring.
The Cubs one is my favorite ring. Skulls are always a top fav to watch you make.
I know what I was going to say I can relate to you more than ever on polishing aluminum brass and copper it isn't easy I've been polishing not very long I just recently got a sanding wheel for my drill and have just started sanding a few aluminum bars it isn't easy but wow it is awesome when it's done I absolutely love your videos and can relate more than ever now keep making your videos Love them so much it keeps me going ❤️😎✌️
The skull with the top hat ring is awesome, great job on all the rings and the skull!
The skull was the best piece I’ve seen! Good job!
Raw, which makes them unique. And beautiful. Great work and vid.
Woah wait whaaat how did they come out so clean without a vacuum caster??
You are moving up to another level of casting
That was a beautiful pour. And I was able to see that amazing blue green glow when that copper is melting. Excellent job all the way around. My fav ring is the skull in the middle at the end. Great video and thanks for sharing. Hope you and yours are safe. 👍
love to see you casting more artistic stuff like this
Thanks brotha! 👍🏻🍻 they were really fun to make and I definitely have some new ideas brewing as we speak.
I love em mate! Your Aussie buddy has a different approach. You've got a really skilled and technical artistic style which is a joy to watch!
Great Video as always mate. And I like all the rings and the skull turned out great. Keep up the good work, stay safe and see you next week.
*When the small drill said : nyeeeaw nyeeeaw nyeeaw*
Really cool video Adrock. I haven't seen that before. You have some cool ideas for melts.
😊
Could you do a Viking themed casting sometime? I think that would be cool. Keep the videos coming man.
I’ve done a Viking Axe in the past for a challenge with BigstackD and Vog, check out that video 😉
Quality mate
I love the Star Wars ring and that skull is cool 👍
Nice work. The Cubs and reaper came out nice.
watching you put the Dremel down the eye holes, is just so satisfying'
of the skull
I definitely love that Cubs ring!
This covid thing has provided me with endless free time. And in that forever I've watched most everything you've made. It's fascinating to witness your skills grow. You're becoming quite the master
I really like the skull, just different enough to be appealing.
I got a couple of rings from your link and they are by far my favorite rings I own
Investment! That's what that's called. I always forget. I need to look it up
A beautiful ring, I hope to give it a gift for your followers
I love the Star Wars ring!
Really cool rings, but the skull is AWESOME!!
I do a little bit of jewelry casting myself with my vacuum machine I didn't know you could just pour it in there also
the ring i like is the one w/top hat,, the pieces i really love is your skull collection, be strong, be safe, and be blessed
Cubs ring is my favorite! Awesome job.
Mine too 👍🏻
I think you'd get a cleaner casting if you heated the mold before pouring the metal. From what I've seen from others, lost wax casting is usually extremely clean, but they always heat their molds before use.
"all this clean-up was very time consuming"
I'll bet, all those tiny details and crevices to clean up, phew. They came out looking great though :D
Yes it really was 👍🏻
Awesome Job. You have some patience for all that cleaning.
I LOVE The Star Wars Ring!!!
Lost PLA and lost wax casting requires a lot of preparation, but the results are amazing.
I love all of your videos but this one is my favorite cause I love skulls
I hate when I get crusties like that in my nose cavity and have to get out the dremel to clean it out!
Very nice this week, very nice!
😊
Very Cool. The big skull had some awesome detail, and was spot on! The rings were really good, I liked the star wars one, but the skulls were great too. I seen someone looking for molds yesterday and directed them to your website. Great Video and Stay Safe.
The black wolf on your finger is my favorite 😆
Wow, the level of detail you got out of that plaster was pretty great. Have you ever played with zbrush before? You could probably make some pretty awesome stuff with it.
Thanks 🙏 Yeah I use zbrush a lot 👍🏻
Awesome, I love bronze casting. I did it for school once but I can't afford a forge and equipment to do it.
In the words of Vince McMahon, this is "some good shit" right here. Love that skull and all the rings came it great. Really good video man thanks for the ten minuets of entertainment. Cheers!
Very nice!!
Have a GREAT Day!!!
Dang, you are getting quiet the workshop over there with those printers and vacuüm stuff. I did not think they would come out that great thinking you did not pour vacuüm. But I have to say, they look great!
Those rings for a man are awesome.
I love the Grim Reaper ring the best!
aggressive looking good katana and rings
I don’t know if you are aware of this trick or not.
But get a dowel about 3 inches in circumference and about 12 inches long and taper from about 5 inches to one end.
This will secure the ring by a friction hold and keep your hands safely away from the polishing wheel and grinding and sanding.
👍👍👍
try using a vacuum system with your perforated flask when pouring the metal for better results (less porosity, more detail) look into the kaya cast system from arbe
Dude, get a jewellers tumbler, it makes cleaning up casts much easier. Especially if you start doing precious metals.
Amazing work..keep it up bro
Great looking work!
The Cubs ring is dope
Grim reaper ring is dope!
Beautiful 👍👍👍 . Thanks for sharing
Now they're all ready for gold plate.
The Cubs ring is awsome
The skull looks great!
The star wars ring came out cool
That's a nice electric kiln dude
Oh Hell Yeah! I love the skull.
Nice ring and i love it.
It looked like the copper might be too cold, but everything came out great :)
When casting rings, we always see chunky men's rings. Try a delicate girl's ring sometime?
That reaper ring is nice. Reminds me of samcro
my favorite is the one that don't turn your finger green
Those look amazing.
ADAM WHAT DO U MEAN THEY TURNED OUT LOOKING AWESOME I am not much of a ring kind of guy but if I had to choose would b the 1st ring on ur shelf at the end BUT THE SKULL IS THE BEST that SKULL must of taking a long time to clean that up dang it, and I see a few what looks like sum NEW GADGETS u got there 🇨🇦😎👍🇨🇦😎👍🇨🇦😎👍
I'm partial to the Cubs ring lol😉 however they all turned out great. The skull is fantastic!!
You and me both 😃
Thanks for posting. Where do you get your wax and what kind?
The rings are awesome. I like the skull with the hat and the star wars one. Cubs was cool, just not a cubs fan lol. The solo skull was awesome that looked like a pain in the ass to clean up though
Great work!
I bet you could make some really really detailed coins with the lost wax casting
Espectacular, hermano felicitaciones abrazos desde Argentina
Good show, but, can't tell the wife, "ohh, I love it, I want it, got to have it, when,when,when!!!!l"
Worse than a kid about anything Cubs. Thanks Adam, BTW love the new equipment.
This is awesome!!
Would be awesome to see devil forge send ya a custom “ArtbyAdrock” forge !
😊
Cool! So gravity was enough to fill everything out? I always thought you needed some kind of vacuum or centrifugal contraption…
Nice work!
Nice Cubs ring!
AWESOME BIT OF WORK MATE 😊 THOSE RINGS JUST STUNNING. THE SCULLS EYE SOCKETS I MIGHT HAVE LEFT SOME OF THE PLASTER JUST FOR CONTRAST... ANYWAY ADROCK TOP WORK 😁😎😁☮️❤️🏴💣💥
Awesome bro!
Cool video ...you can use silicon to make multiple copies out of the originals wax rings when it needed also recommend to make cavity into the skeleton wax then cover the hole after casting .to save copper investment of it and gives the skeleton statue heavier ...is it gypsum mold you used to cover the wax forms ?
hey really enjoyed watching you make the Rings at a copper turned out great. you can use to pour metal and the vessels without a vacuum machine I didn't know that
Great vid lost pla is hard and expensive glad to see someone do a good one, if find a cheaper way to make the investment tho, everything looked brand new, I’m jealous
great video keep you the good work!
Next up, a BMW ingot?😂😂
You and BigstackD need to Collab. PLEASE
We already have. Go watch my other videos
Where do you get your scrape metal/copper?
Great job on the skull and rings but I have a great idea and was hoping u could make it so I can see how it would look plz. A solid brass hand grenade life size and polished tyvm.
Cool. I want the Cubs ring
I'd like to see you cast those rings from silver, then you could sell them if you wanted.
Very awesome!!!
What wall thicknesses do you use for PLA? Are thicker or thinner walls better? I presume you print the models hollow?
Is there a calculation for brass, bronze , and copper to wax conversion to know how much metal to use for your weight of wax?
Pretty good job