thanks a lot you help me set my timing well after watching this video i was set my timing from 0 and the valves was touching the piston and making noise when start because of bad timing thanks my master
Very grateful for the effort put into providing these vital details.I have one question,the piston rings require gapping or are they preet from the ring manufacturers.I often see mechanics gring them down
Love this video but I wanted to no if i was to take out the diesel pump to service it I usually set back the timing before I take it out will it come out if timing when I take the pump out for service
This is my daughter acct,but you can reply to it.The video was cool and informative . I scrapped my Wl non turbo and didn't see timing mark on gear for fuel pump.can you advise?I am a DIYer and it's my first time at my WL engine (Trevor).
Good day mr Arberdeen rebuilding of this wl engine is in 4 parts. Part 2 is where the information for the timing of the engine, that includes the timing for the fuel pump. This is the site where you will get the information , any further information you required feel free to contack me sir. ua-cam.com/video/RvjsM6OXlag/v-deo.html
Hello guys. But the yellow marks are done by you? Under wich reference? Because when i dismantled my engine i didnt see any marks i look for them. If i dont have the marks in the gears, how would i know then how to install them?
which yellow mark you talking about ? the ones to tighten the bearings on camshaft. if so then i assume they just marked it to know when to tighten to the appropriate torque spec. i guess a torque wrench would work nicely. video said 33 foot pounds
hi i have a 2006 ford ranger that i'm doing a rebuild on. i'm having trouble with the timing marks. i have watched your videos and all the timing marks on the cogs are lined up and the flywheel has been turned back 15 teeth. when iv gone to put the crank pulley on i've noticed that the mark on the crank pulley does not line u with the marker, ive also notice that the fuel pump marker does not line up. if i turn the flywheel to TDC the crank and fuel pump then line up. does this mean i turn the flywheel to TDC when i put the head on so all the marking line up??? i hope you can help as im very confused
i have an wl-at broken engine in my mazda. do you know if i can use an wl-at engine with rpm sensor on ''fuel pump timing gear'' i think the only diference is this rpm(crankshaft sensor), some flap on intake maifold, and crankshaft pulleys. both engine block have wl-at sign on. engine in my car has crankshaft sensor timing gear cover and it reads of crankshaft pulley if you have an email i can send you some photos of both engines
my car has turbo wl. used engine come without turbo and fuel pump so i dont know. But on pipe on engine head there is pipe for cooling turbiune so i think it was turbo.
Ford Ranger/Mazda Piston Description Mazda-Wlt Piston.93mm 87.3mm 47.8mm 32mm*69.8mm WLY1-11-SA0A Cylinder number : 4, , Diameter: 93mm , Height: 87.3mm, Combustion Height: 47.8mm, Piston Pin 32mm*69.8mm , Material: ZL109 Aluminum Alloy , OEM: WLY1-11-SA0A, 2.5L WL- Compression ratio -21.6 :1 ( 2.5L WL-Turbo-Compression ratio-19.8 : 1) The cylinder head gasket is made of five laminated layers of stainless steel. . 2.5-WL / 2.5-WL-T engine have a swirl chamber,The swirl chamber is in the injectors housing. chamber consists of space between a flat cylinder head and a small cavity in piston crown. . The both WL and WL-Turbo Blocks is the same, WL Turbo engine carries 2-Balance shaftsNon turbo engine do not use balance shaft.It have the balance shaft ports I hope this answers your question, fee free?? . Thank Mr Dillon, for you for the question.
Gooday guyz... i have the same engine.. and i have problem on the ringth turbo balance shaft i have only one dot on it... and my supply pump gear thier is no chipcut.. but the upper thin gear has one dot in it.. and that gear is turning indipendently.. i cant line up the timing... this engine is opend by other mech. Before.. engine has no power and have a lot of vibration.. i hope you can help me guyz...
wow .. half of them mechanics i pass thru waste my time n money yes .. men change d head n have d van sounding like a tractor... i get fed up n bought a new engine .. waste plenty money .. when i upgrade . mazda cant get my money again
One of the best instructional videos I've seen. Keep it up, Steve (Australia)
WELL DONE BOYS , CAN`T BELIEVE THAT I COULDN`T FIND THIS ANYWHERE ELSE. GREAT WORK
Thank you Sir.
You have taught me and still teaching me so much. You are the best.
thanks a lot you help me set my timing well after watching this video i was set my timing from 0 and the valves was touching the piston and making noise when start because of bad timing thanks my master
You are explaining it very well Thank U Gentleman
Thank you for taking the time to share your skills.
well done guys, you have saved me from lots of headaches.Thank you
Very grateful for the effort put into providing these vital details.I have one question,the piston rings require gapping or are they preet from the ring manufacturers.I often see mechanics gring them down
Hi trinidad boss can you please tell me what is torque specs on Mazda drifter 2.5 tdi, please sir
good video..watching from indonesia.🙏🙏
Thank you very much you explain it very well
Thank you.. watching from PNG..
Good job
Wow, thanks guys, that was very informative. I have one question and that is "What is the torq specs for the Crankshaft Main Bearing?". Keep it up.
Hi William did you find out the torque on the main bearing cub, I am struggling with the same thing
Great stuff well done team.
Does the WL engine 2.5 turbo uses a Sleeve cylinder?
Love this video but I wanted to no if i was to take out the diesel pump to service it I usually set back the timing before I take it out will it come out if timing when I take the pump out for service
no there is a key it can on spot
Thank you 🙏🏼👍🏽👍🏽👍🏽
Hi gud evening which u all located i have a we 2.5 common rail wanted to find out if a 2.5 single cam wl cud line up wit d we transmission
Do these gears have marks on them,besides using a marker?
Good afternoon. What's the cost of rebuilding the engine?
thats a great job'
great job what is the total cost to rebuild
Depends on how much part's you need
Usta çok teşekür ederiz
You are doing well
What is a good brand of rings
This is my daughter acct,but you can reply to it.The video was cool and informative . I scrapped my Wl non turbo and didn't see timing mark on gear for fuel pump.can you advise?I am a DIYer and it's my first time at my WL engine (Trevor).
Good day mr Arberdeen rebuilding of this wl engine is in 4 parts. Part 2 is where the information for the timing of the engine, that includes the timing for the fuel pump. This is the site where you will get the information , any further information you required feel free to contack me sir.
ua-cam.com/video/RvjsM6OXlag/v-deo.html
ua-cam.com/video/RvjsM6OXlag/v-deo.html
REPLY
But please what is reason for oil ring gap to be there, I was thought to always put it where the oil pump is
Hello guys. But the yellow marks are done by you? Under wich reference? Because when i dismantled my engine i didnt see any marks i look for them. If i dont have the marks in the gears, how would i know then how to install them?
which yellow mark you talking about ? the ones to tighten the bearings on camshaft. if so then i assume they just marked it to know when to tighten to the appropriate torque spec. i guess a torque wrench would work nicely. video said 33 foot pounds
Hi you there what is the torque specs on this engine in newton meters
hi i have a 2006 ford ranger that i'm doing a rebuild on. i'm having trouble with the timing marks. i have watched your videos and all the timing marks on the cogs are lined up and the flywheel has been turned back 15 teeth. when iv gone to put the crank pulley on i've noticed that the mark on the crank pulley does not line u with the marker, ive also notice that the fuel pump marker does not line up. if i turn the flywheel to TDC the crank and fuel pump then line up. does this mean i turn the flywheel to TDC when i put the head on so all the marking line up??? i hope you can help as im very confused
ua-cam.com/video/RvjsM6OXlag/v-deo.html
Is there a part 2? I cant find it!
Great job, guys! Can you make automatic Russian subtitles?
Thank you Sir !
Its good,,,thank you,,,,,💫
Was the Toyota 5.7 liter engine
hi i timed it at TDC ,what could happen if i run it like that, thegear markins there culd not line up but the engine started.
Good evening sir
i have an wl-at broken engine in my mazda. do you know if i can use an wl-at engine with rpm sensor on ''fuel pump timing gear'' i think the only diference is this rpm(crankshaft sensor), some flap on intake maifold, and crankshaft pulleys. both engine block have wl-at sign on. engine in my car has crankshaft sensor timing gear cover and it reads of crankshaft pulley if you have an email i can send you some photos of both engines
Good day mr mocnik, you can send me the photos. Is it a turbo or none turbo-WL (cggmservice@gmail.com )
my car has turbo wl. used engine come without turbo and fuel pump so i dont know. But on pipe on engine head there is pipe for cooling turbiune so i think it was turbo.
i wil send you emial with pictures now
CGGMS Limited
Sir here i have a problem with pin of fuel pum gear.. U told that must be central.. But my gear is already not in central... Can u help me sir
Same problem dude
merci 😎😎😎😎😎
Hi. Video was nice.
I have a turbo
Hey. Tks for getting back. Didn’t see the message in time. I got one. Tks again
What is the clearance around the piston chamber ?
And what is the difference between the turbo block and non turbo block
Ford Ranger/Mazda Piston Description
Mazda-Wlt Piston.93mm 87.3mm 47.8mm 32mm*69.8mm WLY1-11-SA0A Cylinder number : 4,
,
Diameter: 93mm , Height: 87.3mm, Combustion Height: 47.8mm, Piston Pin 32mm*69.8mm
, Material: ZL109 Aluminum Alloy , OEM: WLY1-11-SA0A,
2.5L WL- Compression ratio -21.6 :1 ( 2.5L WL-Turbo-Compression ratio-19.8 : 1)
The cylinder head gasket is made of five laminated layers of stainless steel. . 2.5-WL / 2.5-WL-T engine have a swirl chamber,The swirl chamber is in the injectors housing.
chamber consists of space between a flat cylinder head and a small cavity in piston crown.
. The both WL and WL-Turbo Blocks is the same, WL Turbo engine carries 2-Balance shaftsNon turbo engine do not use balance shaft.It have the balance shaft ports
I hope this answers your question, fee free??
. Thank Mr Dillon, for you for the question.
CGGMS Limited do you guys do rebuilds and if yes can u send a contact number ?
Ford ranger WL engine how to remove fuel pump
Where in Trinidad r u all located please thanks
Where in Trinidad r u all located
Mayaro
@@cggmslimited5418 alyuh have head for d Mazda b2500
what does WL mean?
Gooday guyz... i have the same engine.. and i have problem on the ringth turbo balance shaft i have only one dot on it... and my supply pump gear thier is no chipcut.. but the upper thin gear has one dot in it.. and that gear is turning indipendently.. i cant line up the timing... this engine is opend by other mech. Before.. engine has no power and have a lot of vibration.. i hope you can help me guyz...
Yo
3601425 call this number
Im from philippines can i call that number from here?
Yo quiero saber las calificaciones de válvulas de un motor Mazda 2.5wldiesel Matus año 2011
Usa tres válvula por pistones
whats the average cost of this rebuild?
parts cost around 6000
What's aluh contact ?
It the same marking for DOHc engine 2.5 wlc
Hi how much it would be to do this on a mazda wl engine? I have a cylinder head gasket leak.
Собрал я этот дизель своими ручками.
B2500D MAZAD HARD START '
THIHK YOU
My ford everest 500k mile age already low power
wow .. half of them mechanics i pass thru waste my time n money yes .. men change d head n have d van sounding like a tractor... i get fed up n bought a new engine .. waste plenty money .. when i upgrade
. mazda cant get my money again
15 teeth sir ?
Lost interest, within 20 seconds.
The video quality and stability gave me motion sickness.
Pity, maybe it contained good content.
C
Contact please