This was possibly the most beautiful thing I've see on UA-cam. I was brought to tears. Better than 12 months in an isolation tank with every book that Orwell scribbled. Wow.
I want every car this guy has. I'm just starting out with three 1/10 scale Rcs. One I bought because of Kevin! The 1/10th scale Rampage Kevin reviewed a while while Already had to buy replacement parts for one of my cars. Love this hobby!!
Metal upgrade and brushless!!! Please!!! Got the same as my first car and upgraded the shocks at first. It isn't not so soft and jumpy anymore!!! Go keV!!
it's a POS with plastic differental gears and weak ass screws to hold in the out put cups...it's been known to give people plenty of headaches. .It can nickel and dime you to death He 'll be better off slapping a 3650 in the wl 10428 1/10,. Race it against a traxxas.lmao
OneEyE Monster correct, Virhuck and Feiyu clones have the metal diffs in them, I know the Virhuck V-01 is powered by a 390 motor, grabbed one when they were 42 bucks in eBay. cut 1.5 turns off all 4 springs (flatten new ends), gave it shock seals and oil (30wt rear 80wt front), 100mm tires and a 10T pinion because they ARE top heavy and too fast for their own good... it's MUCH better suited to being a trail crawler/bouncer/climber, not a fast bash around. the simple shock mods allow more+easier flex, and a little bit of negative suspension travel in the mix helps keep the wheels to the ground more often. sure I took away 55-60% of its top speed, also saves the stock motor+ESC from thermal shutoff or burning up. Kevin is cool, but he likes FAST lol. 12428's motor mount is more difficult to use different pinion gears too.
@@klimenz it is when it;s still a POS with weak ass screws that will snap. It's a RETARDED design. The subotech 1/12 4x4 has all metal diff ..with C lips. like a regular beefy hobby grade...metal. drive lines..which I got for only $35 NIB..It goes for around $50.... Even the dogbones are bigger than my 1/10 redcats pros.... it has as the same width as the 1/8 corvett newbright. I made a chassis for it....install a BRUSHLESS 2845 3300 KV 3s 40C. Use stock fy03 wheels and tires....it'll do 40 mph.lmao since I got a couple of volcano PROs for only $108-es NEW...I extended the chassis to 16" wheel base on one of them..Mounted those big arss wheels with maga offset from the subotech.. It's 13" wide Not as fast as an OX...it's 1/7 4x4...22" long with body.... that'll do over 45mph for only $110.lmao...waiting for the 3s 50 5000 packs to get here...it might do 50mph....The damn tires came un glude when I tested this morning.lmao
Bought 1 of these based on the review/videos on this channel and I love it. Currently waiting on some new oil shocks to be delivered so I can do my first upgrade.
this has to be the best rc channel on youtube also when is the trx4 rebuild coming out and could u also put a new bash body on the trx4 like a bronco keep up the bashing
I think adding oil to the shocks will help a lot with future damage, everytime you jumped it you can hear it’s frame/chassis smacking the ground and that’s not good for the motor or the other parts like the skid plate/chassis
How did you get the glue off of the screws for the "on and off" switch as well as that wire that goes to it? Mine is caked in a bunch of glue. I burned up my ESC and I need a new one.
I'm glad this video was made before I got mine because my driveway tore up my chassis and now the gear is exposed, front diff is gone, and I broke an inner 4 link mount on the rear axle on a really twisted jump, I'm using a BMX ramp similar to what you used in the review but that's the fun in the hobby is breaking it and fixing it only to break it again, it's a money pit but it's fun
I have one of these as a rainy day kind of toy and I've been happy with it ever since. Only thing I broke was the rear pinion gear after doing wide open reverse pulls and slamming the controls forward. I don't think there is anything else as durable as that for under 100 dollars
I've owned my 12428 close to 2 years. I've upgraded the shocks to oil filled and the rear differential to steel. It was £48 from eBay one of the greatest value rc about
Hello, new to the hobby here. I have one of these cars. Thing is, I think the ESC got wet so it will run for a bit then stop but the servo is still working. How hard is it to change the ESC and is it worth it?
A bit late I know Kev, but if ur impressed with this cool rc car then anyone would be too, ur one of the hardest testers on rc cars anywhere so for me this car will last for yrs 👌, only one question, do the wheels run on bearings or teflon bushes ?, im realy hoping bearings
Either that or take pictures of it as you take apart. Or as you pull apart put screws back in holes as long as they don't get in the way of the disassemble part.
I have the same one and it has started to amke squeaky noise and how do i fill the oil bcs the suspension makes the noise too and it doesnt do full 4 wheel drive one on back and one on front dont move so well with the other ones
I'd like to see you mod this. I'm gonna try and put some away pars on the back to see if that'll improve the performance but I'm kinda scared thinking of popping brushless into it without destroying it with the first Max throttle ;)
Metal shock caps, maybe tires for the area your driving. Stock slash can handle quite a bit as its not too fast and banging too hard on stuff. I just put metal shock caps on the stock oil filled shocks, the plastic caps will strip and pull off if hitting a ramp too hard. Metal shock cap wont strip as easy, i also just got the velineon 5500 brushless motor and esc. So mines all stock besides shock caps, motor and esc. Still have same rc controllor. Still have regular stock gearing.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍 Love your videos and that car, i have one myself. Question: i tryied to change gear to steel but i broke the scren that holds it , so bought a new gear but it came with plastic and when i was about to change it...it did not turn again. Si i descided to left it in plastic as it was before. PLEASE tell me how to remove the screw that hold the gear it seems that it had superglue.....ANY advice is appreciated. Greetings from TX, Cheers!!!
The motor mount screws were superglued on mine. I applied the old solder iron to them and managed to undo three, but the fourth sheared off at the mount. I'll have to drill it out I guess.
hi,i have the 10th scale model of this an was wondering if you had any suggestions on battery upgrades? cause i want to boost it abit and also have some extra batteries for when im out an about using this thing an a battery dies and you seem pretty knowledgeable with this stuff and i dont want to fry anything, thanks a ton if you respond, also after watching this im going to cut out a piece of metal for that bottom plate for sure so thanks :)
Bosch is easy to find here in the states. Can go to the local hardware stores and find them no problem. I just have never seen that hot glue gun, but then again I didn't even know one like that existed.
I cant believe you did not break the rear drive shaft, i broke the stock one, bought 2 just in case. Have more drive time on the replacement than the original one. Mine has been in thick mud, sandy beach, in the water and snow, and steering servo is the only thing that has quit besides breaking the driveshaft.
Hi kevin i just had a question for you. Whats the diffrence between brushed and brushless? Is brushless not water proof? I wanna know because im planning on getting the brushed traxxas slash 4×4 and i wanna know if i can just hose it down when i wanna clean it thats why. So pls can u help me lad thank you
2nd
Argh!!!! I wasn’t first haha!
Subscribe!
282,478th!
375,713th he he
This was possibly the most beautiful thing I've see on UA-cam. I was brought to tears. Better than 12 months in an isolation tank with every book that Orwell scribbled. Wow.
I think the Rc intentionally tried to break its nose so it couldn’t smell 8s Steve’s fart! 😂
Now that's funny
STEVO D 313 Nice joke 😂💯
Lol
God comment
Just bought one of these for my son and I am so impressed!! U should have put oil in the dampers when you had it apart.... Great videos 👍
Good repair. A chassis broken is the most time consuming breakage. I like your optimism.
I want every car this guy has. I'm just starting out with three 1/10 scale Rcs. One I bought because of Kevin! The 1/10th scale Rampage Kevin reviewed a while while Already had to buy replacement parts for one of my cars. Love this hobby!!
Metal upgrade and brushless!!! Please!!! Got the same as my first car and upgraded the shocks at first. It isn't not so soft and jumpy anymore!!! Go keV!!
Haha same thoughts here
it's a POS with plastic differental gears and weak ass screws to hold in the
out put cups...it's been known to give people plenty of headaches.
.It can nickel and dime you to death
He 'll be better off slapping a 3650 in the wl 10428 1/10,. Race it against a traxxas.lmao
OneEyE Monster correct, Virhuck and Feiyu clones have the metal diffs in them, I know the Virhuck V-01 is powered by a 390 motor, grabbed one when they were 42 bucks in eBay. cut 1.5 turns off all 4 springs (flatten new ends), gave it shock seals and oil (30wt rear 80wt front), 100mm tires and a 10T pinion because they ARE top heavy and too fast for their own good... it's MUCH better suited to being a trail crawler/bouncer/climber, not a fast bash around. the simple shock mods allow more+easier flex, and a little bit of negative suspension travel in the mix helps keep the wheels to the ground more often. sure I took away 55-60% of its top speed, also saves the stock motor+ESC from thermal shutoff or burning up. Kevin is cool, but he likes FAST lol.
12428's motor mount is more difficult to use different pinion gears too.
@@oneeyemonster3262 £7 for a full set of metal gears. Hardly a fortune
@@klimenz it is when it;s still a POS with weak ass screws that will snap. It's a RETARDED design. The subotech 1/12 4x4 has all metal diff ..with C lips. like a regular beefy hobby grade...metal. drive lines..which I got for only $35 NIB..It goes for around $50....
Even the dogbones are bigger than my 1/10 redcats pros....
it has as the same width as the 1/8 corvett newbright.
I made a chassis for it....install a BRUSHLESS 2845 3300 KV 3s 40C.
Use stock fy03 wheels and tires....it'll do 40 mph.lmao
since I got a couple of volcano PROs for only $108-es NEW...I extended the chassis to 16" wheel base on one of them..Mounted those big arss wheels with maga offset from the subotech.. It's 13" wide Not as fast as an OX...it's 1/7 4x4...22" long with body.... that'll do over 45mph for only $110.lmao...waiting for the 3s 50 5000 packs to get here...it might do 50mph....The damn tires came un glude when I tested this morning.lmao
Omg,, lol. 8sSteve shatting his pants was too much . Genius kev....lol. good tip for remembering where screws go. I do the same.
Bought 1 of these based on the review/videos on this channel and I love it. Currently waiting on some new oil shocks to be delivered so I can do my first upgrade.
Hey Kevin, love your work and the amounts of time you take to make these awesome videos for people that you don't even know! Keep Up The Good Work!
Thanks man, evern this little vid took around 8-9 hours to make
I really like the special choice of music
for the scenes :D
You had so much fun with it that I bought one. Awesome little buggy, fast and fun!
😃👍Those WLtoys 12428 are great for the $ ...lots of screws though to take it apart...awesome glue gun! 👍BEAUTY!
I love when he speaks
My WLtoys 12428 rear tires are not spinning only when I pick it up spins but in that ground not. What should I check?
@Ceansilor Caso lock your diff
Or buy a locked diff
Your committment to the hobby is awesome. Same effort for this thing as the arrmas
ready to bash again! looks good kevin!!
Hi Kev I got one coming tomorrow. I appreciate your video. It made my discussion easy . Way to go bruv!
Good job on this video, I will definitely get one! I was convinced after watching your first video review. 👍👍
this has to be the best rc channel on youtube also when is the trx4 rebuild coming out and could u also put a new bash body on the trx4 like a bronco keep up the bashing
Nice video 👍 not a bad rig 😎
Great vid Kev! Not sure why, but i love that little truck!
Bought my 4yr old one for Christmas. Might end up opening the package b4 Christmas and check it out lmao
lol kev, dont forget how big a company bosch is lol :) great vid as per and i do like a bit of peter and the wolf :)
OMFG THAT WHIP AGAIN🤣😂🤣😂LOVE YOUR VIDEOS DUDE.
Hay Kev great review my son is ordering one this weekend.Sure is worth the money.God Bless Stay Safe Stay Healthy.
Cool video kev!!!!!
Suggestion buy all the parts then assemble one with only the bought parts
Cash?
It will be slightly more expensive and not include the remote and battery..because manufacturers get profits from selling spare parts too..
Wow this thing is surprisingly well built!
I think adding oil to the shocks will help a lot with future damage, everytime you jumped it you can hear it’s frame/chassis smacking the ground and that’s not good for the motor or the other parts like the skid plate/chassis
How did you get the glue off of the screws for the "on and off" switch as well as that wire that goes to it? Mine is caked in a bunch of glue. I burned up my ESC and I need a new one.
You're magnet trick really helped
I like your RC videos
I'm glad this video was made before I got mine because my driveway tore up my chassis and now the gear is exposed, front diff is gone, and I broke an inner 4 link mount on the rear axle on a really twisted jump, I'm using a BMX ramp similar to what you used in the review but that's the fun in the hobby is breaking it and fixing it only to break it again, it's a money pit but it's fun
I have one of these as a rainy day kind of toy and I've been happy with it ever since. Only thing I broke was the rear pinion gear after doing wide open reverse pulls and slamming the controls forward. I don't think there is anything else as durable as that for under 100 dollars
Did you get a hangover LOL. Hey Kev did I miss the cheetah verse the Bison? Or is that coming up? Funny video yesterday :-) you in rare form LOL
Did you ever fill the shocks with oil?
U r very talented. Love the glue gun also. Thanks 4 video!
Love the music montages 🧔🏻👌🏻
GOOD JOD KEV it would be great to go to your shop,
I've owned my 12428 close to 2 years. I've upgraded the shocks to oil filled and the rear differential to steel. It was £48 from eBay one of the greatest value rc about
DIMITRIOS GYLTIDIS ah man £48! I can’t find any less then £70 atm and they are in China :( lol
@@perfektrepairs7934 I bought it from ebay UK
DIMITRIOS GYLTIDIS must be because of Xmas they have gone up
Hello, new to the hobby here. I have one of these cars. Thing is, I think the ESC got wet so it will run for a bit then stop but the servo is still working. How hard is it to change the ESC and is it worth it?
Es la batería de serie? De 2s y 1500 mh?
Your thrashing of this car just made me but one. . Thanks Kev. Love your show . Old or new
Btw did u break any servo before with the cheap rc?
not yet
Sir just one thing
Your great .
A bit late I know Kev, but if ur impressed with this cool rc car then anyone would be too, ur one of the hardest testers on rc cars anywhere so for me this car will last for yrs 👌, only one question, do the wheels run on bearings or teflon bushes ?, im realy hoping bearings
Bearing if I remember correctly
@@KevinTalbotTV OK thanks so much Kev ✌
Is this using original battery ? Or upgrade one ? I have one but not too powerful
Love your videos cant wait to see you fix the rustler
yeeeey.....knew video from kev
Hey Kev is the motor mount adjustable on this truck
Whats the the best wl toys car under 100 dollars? Most durable? This one more durable than that 1/16 truck that went 35?
Great music too....I may watch again just for that
Either that or take pictures of it as you take apart. Or as you pull apart put screws back in holes as long as they don't get in the way of the disassemble part.
good work kev!
I know what Im gonna get for my birthday now!
Why is the first head light not working 😕,when you fixed the car
Can you imagine how good this car will be with an alloy chassis
Too rigid it will break. Its secret is having soft flexible parts
Hey mate did you ever checked out the feiyue fy06? It's pretty much one of these but brushless and 6x6!!!
You ger oil in the shocks yet?
wow im early this time great video!!!!!!!
I have the same one and it has started to amke squeaky noise and how do i fill the oil bcs the suspension makes the noise too and it doesnt do full 4 wheel drive one on back and one on front dont move so well with the other ones
AWESOME video Kevin.I picked one up an that baby is agile an plan on doing some more mods,thanks.
I'd like to see you mod this. I'm gonna try and put some away pars on the back to see if that'll improve the performance but I'm kinda scared thinking of popping brushless into it without destroying it with the first Max throttle ;)
Can't find original parts for this. Can you link to where you got the Chassis?
Just Google WLtoys 12428 spares
keep it up kev
before i buy a rc car i just watch your video is this good for my first rc car
“It’s alive again!”
*_thud_*
Kev, what upgrades do you recommend for a stock slash? Brushed.
Metal shock caps, maybe tires for the area your driving. Stock slash can handle quite a bit as its not too fast and banging too hard on stuff. I just put metal shock caps on the stock oil filled shocks, the plastic caps will strip and pull off if hitting a ramp too hard. Metal shock cap wont strip as easy, i also just got the velineon 5500 brushless motor and esc. So mines all stock besides shock caps, motor and esc. Still have same rc controllor. Still have regular stock gearing.
Which video do you upgrade the shocks?
I was really enjoying the music.
Have you had to change the spur gear out on this buggy?
My 12428 stopped steering...never got it wet, just did some rock climbing. Any idea what I should do?
try to see if the erevo body fits the xmaxx because it always breaks.
The way I would drive this thing around so frugally, it would probably last a long time for me
Same here. :)
👍👍👍👍👍👍👍👍👍👍👍👍👍👍 Love your videos and that car, i have one myself.
Question: i tryied to change gear to steel but i broke the scren that holds it , so bought a new gear but it came with plastic and when i was about to change it...it did not turn again. Si i descided to left it in plastic as it was before.
PLEASE tell me how to remove the screw that hold the gear it seems that it had superglue.....ANY advice is appreciated.
Greetings from TX,
Cheers!!!
Awsome video 😅👍
What batteries do you use personally for this? It's stock battery runs out so fast
Do you know if you can race these side by side? Would like to get one for each of my boys to race together if possible.
Yes you can. Turn one car on, wait for it to bind to transmitter, then repeat on second car.
its simple and complicated at the same time but mostly simple, thumbs up if u agree
The motor mount screws were superglued on mine. I applied the old solder iron to them and managed to undo three, but the fourth sheared off at the mount. I'll have to drill it out I guess.
Hey Kevin do you have a wpl c24
Just bought placed an order and wondering how long it took for it to be delivered.
7 years later ding dong "hello" "hello heres your crosscountry undefeatable rc car"
Why do you dont try the reely micro dune figter
Hey awesome vid, where did you get the screwdriver bit for the driver?
When you gonna take the notorious to the skatepark?
no set date but i will
When you do a brushless conversion use a lightweight type maybe a drone motor. Some drift tires maybe. Oh yeah and I’m 1st.
A drone Motor isnt quite good for that as they are much flatter. Dont know if These Motors would have the torgue to get this thing going properly.
ParRagon - drone motor is all torque. Got one in my trx4 now. Edit I’m retarded, I meant outrunner...I think. Whatever type a tacon Bigfoot10 is.
With a brushless he can go smaller like a 16th scale brushless motor and it will be lighter than it was with the original brushed motor.
hi,i have the 10th scale model of this an was wondering if you had any suggestions on battery upgrades? cause i want to boost it abit and also have some extra batteries for when im out an about using this thing an a battery dies and you seem pretty knowledgeable with this stuff and i dont want to fry anything, thanks a ton if you respond, also after watching this im going to cut out a piece of metal for that bottom plate for sure so thanks :)
Hey kev love the vid! :) by the way first
When are you gonna put sway bars on the 1/10th scale
These little things are kinda impressive. 3 runs in a row at the skate park with my Rustler and 3 inexpensive but time consuming repairs 😂
What was the hot glue for?
If i change my esc then I also have to change my remote or just esc
Hawabi Adhikari just esc i belive
Frome the time i started waching the vid to the end he gained 1000 more subs.
In 1:31 so if you look underneath here, subscribe hahahahahahahhahahahahahha. That was fun , nobody can expected that.
Bosch is easy to find here in the states. Can go to the local hardware stores and find them no problem. I just have never seen that hot glue gun, but then again I didn't even know one like that existed.
I cant believe you did not break the rear drive shaft, i broke the stock one, bought 2 just in case. Have more drive time on the replacement than the original one. Mine has been in thick mud, sandy beach, in the water and snow, and steering servo is the only thing that has quit besides breaking the driveshaft.
How about the running time? 10-15 minute, right?
Yes, I find mine lasts about that long on the stock battery
Hi kevin i just had a question for you. Whats the diffrence between brushed and brushless? Is brushless not water proof? I wanna know because im planning on getting the brushed traxxas slash 4×4 and i wanna know if i can just hose it down when i wanna clean it thats why. So pls can u help me lad thank you
brushless is much faster but not as good for getting wet
@@KevinTalbotTV So if i were to hose down the titan motor it comes with would that bust up the motor?
@@Vato_Loco_rc it wont
@@Vato_Loco_rc Normal rc ,brushed motors are waterproof
@@joseagustinovalle9948 Ok thx for the help lad. My worries are over thank you mate
How to fix this car that it is not moving Or fungshaning after turning on