Was all chill watching this with a coffee. Then we reached 10:24 when you checked out Oxcite and I thought "Oh he is pressuring off rocks not the vent, OK." Then things progressed and I saw your innovative way to warm it. How happy you were when it started to melt and work like you wanted. The small joy in your voice... and then...
I would highly recommend you add the sensors to each room - if you only have the one sensor, and the doors auto open, they could open the breached area before you can repair the damage if each room can lock itself down, the room that is breached will close, and stay closed, but the rest of the base will remain open
The first circuit you installed was already enough. You just need 1 Logic Reader, 1 Logic Writer, 1 Compare and one Memory. You just had the wrong settings...
for that stup you dont need the last memory chip or the las logic reader cause the reader is just reading the data fron that memory and not aplaing it to anithing and the memory dosent read any device it only servs to read from isef, so the sistem will work with thout those 2 last chips
Check out my Locals' page for more Stationeers gameplay spacexcentric.locals.com
what you should do with the pressure sensors, is measure out a general distance, and add pressure sensors in key locations.
Was all chill watching this with a coffee. Then we reached 10:24 when you checked out Oxcite and I thought "Oh he is pressuring off rocks not the vent, OK." Then things progressed and I saw your innovative way to warm it. How happy you were when it started to melt and work like you wanted. The small joy in your voice... and then...
I would highly recommend you add the sensors to each room - if you only have the one sensor, and the doors auto open, they could open the breached area before you can repair the damage
if each room can lock itself down, the room that is breached will close, and stay closed, but the rest of the base will remain open
It also not necessary to hook up both ends of the logic memory for it to work
The first circuit you installed was already enough. You just need 1 Logic Reader, 1 Logic Writer, 1 Compare and one Memory. You just had the wrong settings...
Would be a lot easier to setup in multiple rooms using an IC instead of logic circuits. :)
for that stup you dont need the last memory chip or the las logic reader cause the reader is just reading the data fron that memory and not aplaing it to anithing and the memory dosent read any device it only servs to read from isef, so the sistem will work with thout those 2 last chips
You just need to reverse that comparison.
lmao 11:19