To all: There is now a service campaign in place for getting this door latch replaced at no cost. My driver's side door went first back in 2014 and thankfully it was still covered under warranty. Now 2 years later my front passenger door went. I called the dealership to ask had there been a recall yet as I know this is a common problem with Kia. That's when I was told it wasn't a recall, but a "service campaign" which is entirely voluntary and Kia is not required to notify the owners that this campaign even exists. I just came from picking my car up from the service department. If any of them give you any push back on this, the code used on my service invoice is CS1603B. Oh! There is also a campaign to replace the door handles because the silver coating is starting to peel and can give you a nasty cut. I've already been a victim of that. So they replaced the door handle at no charge as well. Hopes this helps!
I have the same problem , so is covered by a service campaign? . how can I find out more information about it . I called the dealer they do not know anything about it. thanks in advance for your help
They replaced my handles, but now, my rear door handle on the driver (L) side no longer works. The child safety latch was on so, I can't open if from the inside or outside. I am scared to take it to the dealer as they ALWAYS overcharge me for everything. A few times, work charged wasn't even done.
Wow! I had been getting very frustrated with this issue, and was actually just looking for a video on how to get the interior of the door apart. For whatever reason the video did not have sound for me, but I knew pretty quickly that you were fixing the same issue that I was having and through a little bit of scrubbing and pausing was able to locate the same problem on mine! THANK YOU!!!!!!!!!
Wow thank you, you're a genius...saved me $500. Fixed my driver side door, same procedure. Also, I had to take the exterior key latch off to get the actuator out...took about 2 hours, but I'm a novice! Also forgot to put the rubber window screw covers, oh well!!
Merci Charlie, j'ai le même problème en France sur mon Sorento de 2009 ! Comme il est trop vieux le concessionnaire ne veut pas le changer, je vais essayer ta méthode, merci encore ! Thank you Charlie, I have the same problem in France on my 2009 Sorento! Since he is too old the dealer does not want to change it, I will try your method, thanks again!
This videos really did help me it works but the door wont lock so i did it for a temporary fix i just tossed it up and ordered a new lock set up off ebay for $55.69 and did this same process plus a few other steps and wah lah problem fixed permanently (hopefully) thanks for the video
Well, thanks for the video. I decided to do it coz the dealer wants $400 to fix it. I bought the replacement part for $50. I actually replaced the latch assembly completely by myself! It takes a lot of patience, and tiny hands but it can be done! I had to use impact wrench to remove two bolts holding the window before you can even remove the entire metal cover. And with the actuator, I actually have to fish out the little ball at the end.
keep the foam on the front part of the rotating tumbler to keep the plastic piece from falling worked so far...pain it the ass to get to it as doors always are the video was beneficial to see how it comes apart ....thanks charles
Man, I am not gay but I swear I would give you a kiss with tongue for this solution😂. It works perfectly., Folks don't fool yourselves thinking this is a permanent solution, it will fail again eventually as the foam looses its elasticity inside.. I ordered the new actuator from korea for $90 shipped. I have a sorento 2010. God bless you. Thank you so much
Hi Folks, just an update here. I have received and installed the new actuator since this solution didnt last long for me. The actuator came with the wires inverted (common issue) so after installing, when I lock the car, the door with the new actuator unlocked and vice versa. The solution is to take everything apart again and at the connector that goes into the actuator invert the orange and blue and then it works beautifully. Hope this helps somebody out there. cheers
The foam pushes up the locking mechanism allowing you to open the door from the outside. My 2011 drivers broke and I drilled out the side of the door exactly where this white clip is, rather than taking apart the door. After manipulating white clip upward, I was able to open the door from the outside. However from what I saw is that if you insert the foam, you will no longer be able to keep the outside handle from being locked, it will always be unlocked. When you push up the white piece, it unlocks the latch on the inside of the door. Bummer.
followed this instruction and same thing. If you lodge a foam in there, it won't lock and will always be open. Again, if you do this video, you will be able to open the door from the outside BUT YOU WON'T BE ABLE TO LOCK IT! just buy an actuator from amazon or something if you're going to open it.
im about to make a video of myself doing the exact same thing as this guy only sound,, boom wayyyyy wayyy more hits and satisfaction once i figure this out .watch!
ok i have done this entire process even though there is no sound y? who knows? since this is literally the only video i have found to solve this particular problem which again has no sound, no, step to step process is stupid hands down. my door now will not shut,lock,or stay closed some insight/ problem solving would b great .
I had one break under warranty, them 2 back to back outside warranty so I called their head office, they paid for a free rental and fixed both for free. they had my dealership send them back for a check, then about a month later that national recall came out. I also have 4 10" woofers in my Sorento so that probably doesn't help either.
@@privatename3621 door handles stop working to get in, but work to get out. There was a national notice for it, they put a clip in them now to stop them from breaking
Since there is no audio is there a way to get a description of what is happening with that foam getting stuffed into the mechanism? How/why does it work?
Our door is missing a bunch of pegs, and they are not keeping the interior held down...Any suggestions for that? How do I take the door off just to put the interior pegs into place? I attempted to do it (The door wasn't totally off) The pegs I bought broke while I was popping it back into place!! Grrrr
did you ever get to fix that? I'm stuck in the same position and can't seem to figure it out. it's my mither in law's truck and I'm afraid I have lost credibility with her for making false promises. I claimed it was too easy a job and It was a shame when I had to put the door panel back on in shame....help!
This seems to be a issue with many Kia Models . I had this serviced on Kia Rondo EX 2008 passenger rear for 400 + $ at dealer. Now I have similar problem Driver side rear door.
how did you remove the metal frame? mine seems stuck or fixed to the window ...do i just pull it out or what man I'm stuck right where the video seems to miss that part when you pull it out. please share
Assuming you have followed the video right up to the point where it skips a number of steps, i.e. window glass should be removed at this point: When you get to that part of the disassembly, you need to then remove the external door handle. Under the door handle is another bolt that you need to remove. Then undo the three bolts holding the door latch on the side of the door. Then the metal plate on the door will come off. The door lock assembly is attached to that metal plate so it will take a bit of patient manipulating to get it all out, patience because you also will have to deal with all the wiring harnesses attached that restrict how much you can move the metal plate. There are plenty of other videos that show how to remove the door handle correctly, you don't want to break the door handle.
You will have to remove the window, to do so, you have to lower or upper the window with the control switch, like he did, until you see the 2 bolts align with the hole covered by a black round seal. Then you unscrew just enough to release the window clamp so you can take it off. Then, the silver panel could be tough to remove, i had to remove the outside handle.
Our drivers side went, was covered by warranty, but the rear is not. What does the km's have to do with a door latch?..... They want $400 Canadian for a new one!!!
Poor. No sound. Camera all over the place. Can't tell what is going on most of the time. I guess if you are just showing off how fast you can do this then OK but it you are trying to help others do the same thing not so much.
Does anyone know how to removed the glass on the rear door in order to get the metal door panel off. I unscrew the screw that is supposed to connect to the door glass holder but it doesn't seem to release the glass. Is there a trick? Also, the screw doesn't want to come the entire way out. I get it out about 1/4 inch and it jams (like it is captive). Should it come all of the way out?
Goes too fast can't see how to take door panel off. I can remove all the screws but can't get the top of the panel close to the door latch off and sound would really help, but thanks
Reason why no sound is because its only showing u to take off door pannel and where the problem at of why the door wont open from the outside.. The end of the video is the last part showing u the little white part that needs to be push back up.. Reason why i put foam because thats the soft object i use to hold that up.. And it works ..
You could add pop-up text windows using UA-cam. One at the beginning to explain what you typed in. One later on to talk about how important the white tab is. etc.
To all:
There is now a service campaign in place for getting this door latch replaced at no cost. My driver's side door went first back in 2014 and thankfully it was still covered under warranty. Now 2 years later my front passenger door went. I called the dealership to ask had there been a recall yet as I know this is a common problem with Kia. That's when I was told it wasn't a recall, but a "service campaign" which is entirely voluntary and Kia is not required to notify the owners that this campaign even exists. I just came from picking my car up from the service department. If any of them give you any push back on this, the code used on my service invoice is CS1603B. Oh! There is also a campaign to replace the door handles because the silver coating is starting to peel and can give you a nasty cut. I've already been a victim of that. So they replaced the door handle at no charge as well. Hopes this helps!
Thanks for this!
I have the same problem , so is covered by a service campaign? . how can I find out more information about it . I called the dealer they do not know anything about it. thanks in advance for your help
They replaced my handles, but now, my rear door handle on the driver (L) side no longer works. The child safety latch was on so, I can't open if from the inside or outside. I am scared to take it to the dealer as they ALWAYS overcharge me for everything. A few times, work charged wasn't even done.
@Santiago Cardona In case you're still looking, I found "TSB-BOD150R1", and like Chaos said, "CS1603". Have the dealer search for those.
Organized Chaosdo they have a number onthat ?
Wow!
I had been getting very frustrated with this issue, and was actually just looking for a video on how to get the interior of the door apart.
For whatever reason the video did not have sound for me, but I knew pretty quickly that you were fixing the same issue that I was having and through a little bit of scrubbing and pausing was able to locate the same problem on mine!
THANK YOU!!!!!!!!!
Wow thank you, you're a genius...saved me $500. Fixed my driver side door, same procedure. Also, I had to take the exterior key latch off to get the actuator out...took about 2 hours, but I'm a novice! Also forgot to put the rubber window screw covers, oh well!!
Merci Charlie, j'ai le même problème en France sur mon Sorento de 2009 ! Comme il est trop vieux le concessionnaire ne veut pas le changer, je vais essayer ta méthode, merci encore !
Thank you Charlie, I have the same problem in France on my 2009 Sorento! Since he is too old the dealer does not want to change it, I will try your method, thanks again!
Just fixed my door with the same issue, saved alot of time with this video, thank you
Was your issue for door not opening from inside? If so what do I need to buy?
This videos really did help me it works but the door wont lock so i did it for a temporary fix i just tossed it up and ordered a new lock set up off ebay for $55.69 and did this same process plus a few other steps and wah lah problem fixed permanently (hopefully) thanks for the video
Well, thanks for the video. I decided to do it coz the dealer wants $400 to fix it. I bought the replacement part for $50. I actually replaced the latch assembly completely by myself! It takes a lot of patience, and tiny hands but it can be done! I had to use impact wrench to remove two bolts holding the window before you can even remove the entire metal cover. And with the actuator, I actually have to fish out the little ball at the end.
So when that happens you need a door latch ???
Thanks Charlie, I had the same problem at both doors! I followed your method and I repaired !! thank you very much !!!
I have a 2011 kia sorento with the same problem dealer wants 485 to fix thanks for your help Charlie
I can't watch this lighting is bad no voice over and its movements are making me dizzy but thank you for trying to share your knowledge
keep the foam on the front part of the rotating tumbler to keep the plastic piece from falling worked so far...pain it the ass to get to it as doors always are the video was beneficial to see how it comes apart ....thanks charles
Took us about 2hrs to do. Glad we could fix it without spending a dime!
Priscilla Ann the dealership charges 4 hours labor...
Was it for the door not opening from inside and if so what part do I need? Thank you
Muchísimas gracias su enseñanza me dejó reparar la puerta de mi Kia Sorento y me ahorro tener que ir al cerrajero.gracias
I am having the same issue. I'm finding it very hard to follow this. I wish he talked and explained what he was doing.
Holy crap this just worked. Charlie I owe you a beer!!!
Man, I am not gay but I swear I would give you a kiss with tongue for this solution😂. It works perfectly., Folks don't fool yourselves thinking this is a permanent solution, it will fail again eventually as the foam looses its elasticity inside.. I ordered the new actuator from korea for $90 shipped. I have a sorento 2010. God bless you. Thank you so much
Hi Folks, just an update here. I have received and installed the new actuator since this solution didnt last long for me. The actuator came with the wires inverted (common issue) so after installing, when I lock the car, the door with the new actuator unlocked and vice versa. The solution is to take everything apart again and at the connector that goes into the actuator invert the orange and blue and then it works beautifully. Hope this helps somebody out there. cheers
Buenos días un favor cuál es código del actuador y por donde lo compraste muchas gracias
worked great!! thanks buddy...
The foam pushes up the locking mechanism allowing you to open the door from the outside. My 2011 drivers broke and I drilled out the side of the door exactly where this white clip is, rather than taking apart the door. After manipulating white clip upward, I was able to open the door from the outside. However from what I saw is that if you insert the foam, you will no longer be able to keep the outside handle from being locked, it will always be unlocked. When you push up the white piece, it unlocks the latch on the inside of the door. Bummer.
So this doesn't work?
It works only if you don't lock your door. Still a helpful video on how to get to the actuator.
followed this instruction and same thing. If you lodge a foam in there, it won't lock and will always be open. Again, if you do this video, you will be able to open the door from the outside BUT YOU WON'T BE ABLE TO LOCK IT! just buy an actuator from amazon or something if you're going to open it.
Fuck yeaaaah man!!! It worked, thank you saved me big money
im about to make a video of myself doing the exact same thing as this guy only sound,, boom wayyyyy wayyy more hits and satisfaction once i figure this out .watch!
You never made the video you punk!
Where’s the video? You obviously didn’t figure it out.
It took a little bit of work to figure out what it was that he was doing there, but worth every minute invested! Saved myself some straight cash homey
ok i have done this entire process even though there is no sound y? who knows? since this is literally the only video i have found to solve this particular problem which again has no sound, no, step to step process is stupid hands down. my door now will not shut,lock,or stay closed some insight/ problem solving would b great .
Hi Charlie, any chance of sound on video, got issue with door not opening
how did you remove the plastic metal cover panel?
My Kia passenger door latch has gone 4 times in the past 2 years and now the car is going too, will never have a kia again
I had one break under warranty, them 2 back to back outside warranty so I called their head office, they paid for a free rental and fixed both for free. they had my dealership send them back for a check, then about a month later that national recall came out. I also have 4 10" woofers in my Sorento so that probably doesn't help either.
Recall? For door issue? What recall?
@@privatename3621 door handles stop working to get in, but work to get out. There was a national notice for it, they put a clip in them now to stop them from breaking
Since there is no audio is there a way to get a description of what is happening with that foam getting stuffed into the mechanism? How/why does it work?
It's to keep that white object from falling back down..
So this doesn't work?
Did not work for us. Ended up buying the part.
Same. Tried it this last weekend and did not work at all
Hi, what's the part name?
How did you get panel off door?
Our door is missing a bunch of pegs, and they are not keeping the interior held down...Any suggestions for that? How do I take the door off just to put the interior pegs into place? I attempted to do it (The door wasn't totally off) The pegs I bought broke while I was popping it back into place!! Grrrr
How do I get the plate off, I've removed the window and have all the bolts out, but something seems to be caught
did you ever get to fix that? I'm stuck in the same position and can't seem to figure it out. it's my mither in law's truck and I'm afraid I have lost credibility with her for making false promises. I claimed it was too easy a job and It was a shame when I had to put the door panel back on in shame....help!
I never did, however I called KIA and they fixed both sides knowing it was an issue
Thank you so much! I really appreciate your quick response
I did remove the handle from outside, then it went off.
You haven't completely showed how you remove the panel inside.
Holy shit! A whole meaningless video with out sound! Fucking great😄
How do I get the door panel off if it wont open from inside or outside , its a kia 2011 sorento? Help
Yes please explain SLOWLY.
Help!!
This seems to be a issue with many Kia Models . I had this serviced on Kia Rondo EX 2008 passenger rear for 400 + $ at dealer. Now I have similar problem Driver side rear door.
how did you remove the metal frame? mine seems stuck or fixed to the window ...do i just pull it out or what man I'm stuck right where the video seems to miss that part when you pull it out. please share
I have the same question
Assuming you have followed the video right up to the point where it skips a number of steps, i.e. window glass should be removed at this point: When you get to that part of the disassembly, you need to then remove the external door handle. Under the door handle is another bolt that you need to remove. Then undo the three bolts holding the door latch on the side of the door. Then the metal plate on the door will come off. The door lock assembly is attached to that metal plate so it will take a bit of patient manipulating to get it all out, patience because you also will have to deal with all the wiring harnesses attached that restrict how much you can move the metal plate. There are plenty of other videos that show how to remove the door handle correctly, you don't want to break the door handle.
I had mine "repaired" at KIA dealership in North Hampton, NH. Now, there isn't one lock that works correctly - key or fob.
What is wrong with the sound on this video?!? I've tried watching in multiple browsers an on my phone. Almost pointless to post it.
My damn door handles stopped working on my 2011 Kia sorrento. Shit pisses me off and should be a factory recall. 1$ part costs $500 for labor to fix.
Question- HOW did you remove the door module? Your camera moves at that moment.
You will have to remove the window, to do so, you have to lower or upper the window with the control switch, like he did, until you see the 2 bolts align with the hole covered by a black round seal. Then you unscrew just enough to release the window clamp so you can take it off. Then, the silver panel could be tough to remove, i had to remove the outside handle.
I removed the door module to lower the windows
Our drivers side went, was covered by warranty, but the rear is not. What does the km's have to do with a door latch?..... They want $400 Canadian for a new one!!!
Driver side and yesterday passenger side. Total bs
Me too !!! harggghhh
do you have to remove the window?
Yes
@@willtudor0825 9 months later someone actually replied🤣. Thanks though the job was finished the day I asked.
I have no sound any suggestions?
Poor. No sound. Camera all over the place. Can't tell what is going on most of the time. I guess if you are just showing off how fast you can do this then OK but it you are trying to help others do the same thing not so much.
Does anyone know how to removed the glass on the rear door in order to get the metal door panel off. I unscrew the screw that is supposed to connect to the door glass holder but it doesn't seem to release the glass. Is there a trick? Also, the screw doesn't want to come the entire way out. I get it out about 1/4 inch and it jams (like it is captive). Should it come all of the way out?
Should come all the way out
Where is this screw that holds the glass of the window to the mechanism?
Goes too fast can't see how to take door panel off. I can remove all the screws but can't get the top of the panel close to the door latch off and sound would really help, but thanks
My 2011 Kia soronto alarm keeps going everytime I try to open the car and it won’t let me start
If it is a non chip key, this could be the reason. IF you have a chip key, try that.
Kia Service Bulletin addressing this problem: static.nhtsa.gov/odi/tsbs/2016/SB-10089586-5448.pdf
Why is there no sound??
Reason why no sound is because its only showing u to take off door pannel and where the problem at of why the door wont open from the outside.. The end of the video is the last part showing u the little white part that needs to be push back up.. Reason why i put foam because thats the soft object i use to hold that up.. And it works ..
You could add pop-up text windows using UA-cam. One at the beginning to explain what you typed in. One later on to talk about how important the white tab is. etc.
Need sound!!
use an android camera,add sound,&slow dwn video
Si tu passes en France, je t'invite !!!
Is there sound to this video?
Well you can't open the door then how do you have a video where you fix the door by opening it?
It opens from the inside
My driver door and right side passenger door stop opening one after another unbelievable
I'm too high for this one SMH!
wish you would slowe down video & do with an android device
volume would be nice
Why did you skip half of the important parts dude
no sound no help! But thx anyway
I don't get any sound from this video
Don't waste your time. Suck it up and spend the $75 (Ebay) for a new actuator/latch assembly.
Call a mobile mechanic
Why no sound?
Shav ekons
No audio
No sound?????
Hi, what's the name of this part?
theres no audio
Dont have the patience to try and make sense of this. Ill work it out as i go. Waste of timd video really.