It's so strange to see a 3D printer built WITHOUT a 3D printer! It helps bring back those very old-school reprap excitement vibes when we went from a world where these didn't exist in an accessible way to a world where they did, and that was all that counted. The quality is quite good considering!
Wonderful project as always! Besides the fact that the sounds don’t seem like they were added in post-production at all, the video is perfectly explained, with every single step shown clearly. Also, it's really creative and it takes a deep understanding of how a 3D printer works to build one from scratch, even using old CD-ROMs! Fantastic!
Impressionante quello che riesci a fare mi piacerebbe avere la decima parte della tua manualità e inventiva. Ormai seguo il canale da tempo e ti ho visto realizzare diverse cose, ma devo dire che a distanza di tempo riesci ancora a stupirmi.
Thanks for taking the time to make this entertaining video, must have taken you ages!!! Amazing demonstration of what can be done by repurposing old technology. One suggestion, could you perhaps change the Audio when it is printing, I could not bear to listen to it. Change to music perhaps or reduce the level so it can hardly be heard? Thanks again for another great video 😊
Ehhh si!!!, questo è un video motivazionale!! Stavo facendo la stessa cosa ma con uno scanner e poi mi sono fermato. Il mio avrà una serie di problemi per via dei "pezzi" che ho recuperato/manipolato. Ma se riuscisse a stampare qualcosa come quello allora potrei realizzarmi i pezzi necessari a migliorare la stessa stampante. PS: che musica che esce da quella stampante 3D, potresti scrivere un codice per riprodurre una musichetta tanto per cazzeggiare un po ahaha!! Ottimo Daniele.
Veramente ho montato io l' audio, ma essendo musicista compositore e arrangiatore, è da tempo che sto cercando il tempo di realizzare una sorta di strumento musicale utilizzando i motori Stepper/Brushless. Uno di questi giorni lo realizzerò. 😂
@@DanieleTartaglia here's a suggestion: get a job on the side, like, er ... a part-time Uber driver and save up for a Bambu Lab printer. No offence intended, my friend!
@@jtreg But I already have the job, 🤔 This. , in addition to having 3 bambulab and I think about ten other 3D printers. But I will do as you say, you seem like a very wise person 😁🤙
Why you can't watch in front of your nose ? Obviously this is not a Bambulab but it can be a good project in order to comprend how components are used inside top models one. The quality is the the quality of a self made 3D printing machine.
Не даром я подписался на Даниэля - знатный рукожоп (в хорошем смысле этого слова!): я тоже люблю что-нибудь своими "кривыми" руками делать. Создавать что-то самому - очень приятно, пускай даже ты создаёшь копию чего-то, а не являешься "родителем". Каждый раз, когда что-то получается сделать своими руками, я думаю, что я не самый потерянный элемент общества - это придаёт уверенности в себе. Примерно на пятой или шестой минуте данного ролика несколько потерял нить всей конструкции - придётся пересмотреть ещё раз. Возможно, даже не один раз...
It's so strange to see a 3D printer built WITHOUT a 3D printer! It helps bring back those very old-school reprap excitement vibes when we went from a world where these didn't exist in an accessible way to a world where they did, and that was all that counted. The quality is quite good considering!
Wonderful project as always! Besides the fact that the sounds don’t seem like they were added in post-production at all, the video is perfectly explained, with every single step shown clearly. Also, it's really creative and it takes a deep understanding of how a 3D printer works to build one from scratch, even using old CD-ROMs! Fantastic!
the copper aluminum contrast is a great look... nice choice
Класс, Илон отдыхает. осталось использовать не пластик, а переработынные бутылки вот это задача ))
В целом не плохо!
Impressionante quello che riesci a fare mi piacerebbe avere la decima parte della tua manualità e inventiva. Ormai seguo il canale da tempo e ti ho visto realizzare diverse cose, ma devo dire che a distanza di tempo riesci ancora a stupirmi.
Talento!!
Красиво, функционально и просто. Как всегда ;-)
That's the kind of project I really like. Please Upgrade to version 2.0
Thanks a lot 😊👍
Meraviglioso ❤️
Excellent work❤❤❤
Well done Tartaglia! Go with upgrade please🏁
Wow Daniele che impegno video con asmr
Please upgrade this wonderful DIY machine😎
That was cool good job....
Amazing 👍👍👍👍👍
Thanks for taking the time to make this entertaining video, must have taken you ages!!! Amazing demonstration of what can be done by repurposing old technology. One suggestion, could you perhaps change the Audio when it is printing, I could not bear to listen to it. Change to music perhaps or reduce the level so it can hardly be heard? Thanks again for another great video 😊
ASMR good 💯
Stylé de ouf
Mantap bro karyanya keren
❤❤❤
Good ideas
Ehhh si!!!, questo è un video motivazionale!! Stavo facendo la stessa cosa ma con uno scanner e poi mi sono fermato. Il mio avrà una serie di problemi per via dei "pezzi" che ho recuperato/manipolato. Ma se riuscisse a stampare qualcosa come quello allora potrei realizzarmi i pezzi necessari a migliorare la stessa stampante. PS: che musica che esce da quella stampante 3D, potresti scrivere un codice per riprodurre una musichetta tanto per cazzeggiare un po ahaha!! Ottimo Daniele.
Veramente ho montato io l' audio, ma essendo musicista compositore e arrangiatore, è da tempo che sto cercando il tempo di realizzare una sorta di strumento musicale utilizzando i motori Stepper/Brushless. Uno di questi giorni lo realizzerò. 😂
@@DanieleTartaglia forse lo conosci già ma cerca floppotron sul tubo
amazing...
👍👍👍
Ciao ma i video sulla costruzione del flipper ?
Upgrade the product ❤
Audio track is recreated?? NO PROBLEMO CARRY ON
Yes, I don't have the original project anymore so I had to redo all the sounds
behind the scene😅 0:27
So besides a tech-genius Daniele goes Foley artist. What a interesting take. Very entertaining.
Re-upload
Bello il progetto ma personalmente non ho apprezzato lo stile sonoro.
Що ж вас дивитися. Ви ніколи не відповідаєте на запитання.
those plans have been online for awhile now. why don't you do something original?
Can you explain to me the point of this please? I really do not think it was worth your time.
Can you explain to me the point of your comment? I really do not think it was worth your time Sorry, this is DIY Channel not Cooking Channel 😅👍
@@DanieleTartaglia I asked you first.
@@DanieleTartaglia here's a suggestion: get a job on the side, like, er ... a part-time Uber driver and save up for a Bambu Lab printer. No offence intended, my friend!
@@jtreg But I already have the job, 🤔 This. , in addition to having 3 bambulab and I think about ten other 3D printers. But I will do as you say, you seem like a very wise person 😁🤙
Quality is terrible, sorry.
Why you can't watch in front of your nose ? Obviously this is not a Bambulab but it can be a good project in order to comprend how components are used inside top models one. The quality is the the quality of a self made 3D printing machine.
@@giulioballabioi agree with you... In any case your comment Is Better phrased than what i wanted to write😊
Не даром я подписался на Даниэля - знатный рукожоп (в хорошем смысле этого слова!): я тоже люблю что-нибудь своими "кривыми" руками делать. Создавать что-то самому - очень приятно, пускай даже ты создаёшь копию чего-то, а не являешься "родителем". Каждый раз, когда что-то получается сделать своими руками, я думаю, что я не самый потерянный элемент общества - это придаёт уверенности в себе.
Примерно на пятой или шестой минуте данного ролика несколько потерял нить всей конструкции - придётся пересмотреть ещё раз. Возможно, даже не один раз...