I love how you didn't speed this video up. It is really easy to follow. I wish it was the exact kit I had bought since I can follow this so well. It will help understand mine as well. Thank you
I bought this kit at Michaels and haven't opened it yet. Do the pieces need to be cut apart with an Xacto or anything and do the tabs need glue to hold it together?
Hi. A cutter is not needed to remove parts, but it could help. The glue is needed to hold the objects on the furniture (like flower pots) but not to assembly the parts.
Hi, you should have 2 light bulbs and 1 battery unit, all of them with a red and a black wire. You have to twist the 3 back wires together, and the same for the 3 reds, but keep black and red wire separated. It's better if you peel off the edges of the wires because the contact must be done metal with metal, so you have to twist the metal ends of the wires, not the rubber. After you've done this and tested the lights, use the black tape you have in the kit (some small pieces) to protect the wires and avoid contact between the 2 poles. In the video, at minute 15:14, you can see the final results. Let me know if this works!
Hi! Basically, all you need is included in the kit. Maybe you may need a glue stick or small pliers, but nothing special. Don’t be worried, this kit is quite easy
It's not complicated really. It's just a matter of stripping the wire of about a centre metre of its rubber covering and connecting them to each other. There are directions to tell you which wires to connect.
I'm glad I watched this before beginning assembly on mine. I see some things I may customize.
Thank you 😊
Glad to be here at the start of your journey. Such a beautiful build
Thank you very much!! 😊😊
Thanks for this video. I needed help at key points and your video was a big help. I even got the wiring right! 😅
I'm glad it was helpful!
oh this looks so cozy and lovely!
Yes, it looks so good on a bookshelf or near other dollhouses. Thanks for watching my video 😊
You made it look easy to assemble, thanks.
Thank you!
this is so lovely and relaxing to watch, thank you!
Thanks to you!! We hope you'll enjoy the next videos, too 😊
This is so nice! You are very god at putting together those tiny pieces. ❤
Thank you very much! 😊
Thanks for the video. I couldn’t understand the written instructions very well. It really helped me
Thx for filming it, helped me when I couldn't find a part
I'm happy to have been of help to you!
I love how you didn't speed this video up. It is really easy to follow. I wish it was the exact kit I had bought since I can follow this so well. It will help understand mine as well. Thank you
Thanks for this. It is really relaxing to watch and the music is relaxing too. ❤
Thank you!
Wow, love it..m
Thank you 😊
Such talent and skill. That's beautiful 💖💖
Thank you so much! 😊
أنه لطيف🌻يسعدني ان أكون اول رحلاتك ومتابعينك🌟 أتابعك من الاردن
Thank you 😊
Thank you for this guide. I bought this kit for my niece. She loved it 😁
Muito fofo, esse recanto do livro da casa do jardim! Amei!
Obrigado!
예쁩니다
❤ love it great instruction well done new Subby
Очень красиво! 🙂
Thank you! 😊
Going well until I got to the lamp part. Is there a place for help with this kit?
I bought this kit at Michaels and haven't opened it yet. Do the pieces need to be cut apart with an Xacto or anything and do the tabs need glue to hold it together?
Hi. A cutter is not needed to remove parts, but it could help. The glue is needed to hold the objects on the furniture (like flower pots) but not to assembly the parts.
Can I ask how you twisted the wires together? I was given this kit for Christmas and no matter what I try I cannot get the lights to work.
Hi, you should have 2 light bulbs and 1 battery unit, all of them with a red and a black wire. You have to twist the 3 back wires together, and the same for the 3 reds, but keep black and red wire separated. It's better if you peel off the edges of the wires because the contact must be done metal with metal, so you have to twist the metal ends of the wires, not the rubber. After you've done this and tested the lights, use the black tape you have in the kit (some small pieces) to protect the wires and avoid contact between the 2 poles. In the video, at minute 15:14, you can see the final results. Let me know if this works!
Where can I buy the materials from?
I found it on Amazon, but you can look also on Rolife/robotime website
Do you need any special tools? I’ve got the kit!! Looking forward to the build but a bit intimidated:-)
Hi! Basically, all you need is included in the kit. Maybe you may need a glue stick or small pliers, but nothing special. Don’t be worried, this kit is quite easy
@@TheBeatrixRoom thank you!!!
Hey, How can I cut square pipe to 16,8cm, 8,2cm and 4,2cm if I have in my box only one pipe 17,4cm?
there should be 2!
@@ursulacook9883 there was only one - but manufacturer solved the issue! I love it!
How long it took you to do it?
Hi, we needed just a couple of days
Ok, I think I’m on the right track but I might not have the lamp base; I don’t see that part in the bag…🧐
The lamp base is a wooden disc; it should be one of the pre-cut shapes you have to remove from the wooden sheet
Heyy i am not able to do the wiring!
I cant understand what I’m indoing wrong😔
Please help me out!!
Hi, try to explain your problem, maybe I can help. Did you follow the instruction and it doesn't work or you got stuck doing the wiring?
Anyone have trouble with the electric? Idk if I tore something but it should be simple and it’s not working
It’s a good video but I wish you would’ve showed connecting the wires, stripping the wires, that’s the most complicated part!
You're right, but unfortunately, at the time I filmed, I didn't think it was relevant, and now I don't have the footage of the wiring....
It's not complicated really. It's just a matter of stripping the wire of about a centre metre of its rubber covering and connecting them to each other. There are directions to tell you which wires to connect.
Bruh the roof takes forever to do