How to Replace Front Wheel Hub 2002-2008 Dodge Ram 1500
Вставка
- Опубліковано 28 вер 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a front wheel hub on your 2002-2008 Dodge Ram 1500. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• Pry Bar 1aau.to/oQS/1AX...
• 10mm Wrench 1aau.to/oTv/1AX...
• 21mm wrench
• 22mm Wrench
• 18mm Socket 1aau.to/oacS/1A...
• 21mm Socket 1aau.to/oacS/1A...
• 35mm Socket 1aau.to/oai/1AA...
• 7/8 Inch Socket 1aau.to/obo/1AX...
• Torque Wrench 1aau.to/oazp/1A...
• Bungee Cord
• Gloves 1aau.to/oVj/1AX...
• Safety Glasses 1aau.to/oNz/1AX...
• 5mm Hex Socket
• Floor Jack 1aau.to/oY6/1AX...
• Hammer 1aau.to/oRT/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Just did this same job.if you pull caliper and rotor first, you can pull down on lower c.a., and have enough room to pull it off of outer splines without having to completely pull out axle.
Very helpfull thank you😊
This s the wrong wheel setup
The 35 MM must be deep and if you can't find 35 MM like me 1 3/8' deep will work (EXACT FIT).
What year is this Ram? I have a 2007 and it has front struts. This Ram doesn't and curious as to what holds the front end up on this 4X4 Ram.
You are an amazing teacher thank you and God bless you.
Thank you so much! Been waiting for a video on this
Thanks for the Torque specs 👍