Really nice looking fusion , looking to mod mine , and I’m so glad the newer 2019-2020 fusions are super easy to change the light bulbs now I know how much a pain it is when you have to take the whole bumper off just to change the bulbs
It’s friggin ridiculous! I’m glad they changed it too! I’ve been wanting to upgrade my Highbeams to LEDs too. But I haven’t because that damn bumper removal
You forsure wasn’t lying about how slow this car is. Bought the 2013 a few months ago because I liked the way it looked, and planned to customize it similarly to how this one looks.... but i was admittedly a little upset when I realized it took a legit 15-18 seconds to go from 0-60 😭. I wasn’t expecting a race car but I’m struggling to keep up with Civics 💀
Something is wrong. With my G-Tech the wife's ripped off 7.5 sec. 0-60 several times in a row in both directions with 3 people and a full tank of gas on my level road I have used for years. It a DGI 2.0 with the dreaded DCT.
@@edschilling2725 idk if anything is wrong, I think Ford just made the car is slow lmao. I saw someone super charge one of these n it took him 11 sec to go from 0-60 😂
I have a titanium that came with 19”s from factory, and with them on a lowering kit closes that gap majorly, you might even have to roll your fenders slightly
Excellent video. I like that you have credited all the sources for your mods and that you kept your car somewhat " stock/factory " with things like painting the existing wheels, adding the fog lights from another Fusion, and modifying the tail lights with " masks ". My Fusion is also silver, and this video has given me a few ideas for when I start to modify it (I just picked it up a few days ago). I really like the wrapped roof.
It's been a few years, how has the door handle covers held up? I'm also in AZ, and I always imagined the hot sun might weaken the adhesives and one day instead of pulling the door open, half the cover will just pop off.
Loved this video bro, so amazing to learn all the awesome things you've done to this Fusion, BRAVO, great job! So glad I subscribed to your channel! Question, your headlights, how did you manage to tint/darken the orange-colored turn signal light inside the headlight?
He says right in the video that the front markers (the orange " triangular " piece) has tinted film on the outside. He did the tail lights the same way as well as the redundant turn signals in the mirrors.
On the headlights, you can actually loosen the lens just enough to squeeze your fingers through and get to the bulb. I put in LED’s but it was a pain. Easier than removing the number though
A lot of your mods I have wanted to do for a long time. I like the headlights and fog lights. I also want to put in a 1" spacer on my wheels. I think flushing the rims with the edge of the wheel wells would look great! Nice work! Keep up the good work.
I have a 2015 2.0L eco boost. I’ve gotten a tuning chip on, intake, it’s gotten a bit faster not a lot. About to wrap it in gray color and apply ss tuning wide body mode but gotta find 20*19 wheels first
Bought a 2-14 FF hybrid a few months ago and was looking into some things to make it just a little different, I was liking your video because most of the mods were just slight changes but I had to insta like and sub for the NMSU plate ring, more of a lobo fan but I support all NM. good looking car though
I have been looking for a grill like yours. Can you tell me where you found yours at? The car looks amazing!! I have a 2018 and I’m about to start modifying mine as well (I’m sorry I commented before watching the whole video 😬 the car looks awesome!
Check out my description field of the video.. I have a direct link to the grill I bought.. however you will have to find the one for your 2018 model because they won’t be the same
Haha perfect! just because I did it doesn't mean you can't! Do it! get it vinyl wrapped! I love the aggressive body lines of these Fusions and the Vinyl just accentuates them even more!
Oil catch can is a Must if you have a Turbo engine to keep carbon buildup out of engine. You must have the non turbo 2.5 engine bc even the 1.6 turbo engine has like 180 hp not quick but not Hella slow.
I love it but why keep it on stock wheels? Cause they look spray painted not bad but it would be better with some aftermarket wheels I have a 2013 fusion and i love it just wanna get more ideas love ur man
EverythingAvron yeah I feel that man I was on stock wheels and spray painted them so that’s why I was saying I love it tho it’s a better build then mine without a doubt and If u do get aftermarket wheels ur car is just gonna get better lookin keep it up
So I can order anything 2016 fird fusion for my 2014, so I'd be able to get the newer mirrors with the blinkers? Such a pain the ass just finding stock Alloy rims for the '14
you always have to double check when it comes to wiring and connectors if your vehicle is compatible. But mechanically yes 2016 Fusion parts will fit on your 2014
@@EverythingAvron What about my 16's? Can I technically go up to 17's or 18's? I hear the bolt pattern is pretty much a pain to find (5x108). I know i have to watch for room wise and 18's would work but is a stretch? I just want my 14 to look more up to date, so I'm glad I found this channel
Hey nice video bro! I appreciate the walk thru of all your mods. Not many Fusion vids on YT! I have a '16 2.5L so I feel your pain w/the lack of power, but the K&N intake gives it a bit more giddy up...or at least produces the sound to make you think so! lol peace brotha
@@EverythingAvron What, you don't like that angry leaf blower sound? I have the 2.5 also, I can't decide if the car sounds like a leaf blower or what a Prius might have sounded like with a gas engine instead of the hybrid powertrain.
I’m so glad I found this channel! I own a 18 Platinum! Also I think the Mondeo Vignale 19” Rims would look great on Yours! The Vignale are just 19” Platinum Rims dipped in Gun Metal. I used to have an 16 1.5EB SE and I hated that Turbo Lag but it rotated in corners like a Focus ST!
You gotta kinda pry it out with a skinny screw driver.... you’ll see a lil notch where you take it out from. Then the new LEDs are a simple connection and push it back in
No not at all it’s easy. you only need to get the fog light harness p/n DG9Z15K867B... the fog light switch p/n DG9T13D061BCW..... the fog lights themselves www.ebay.com/itm/193254333283..... and maybe some Bulbs if there not included. And it’s literally plug and play.
When you used the 4dtech products did you connect the back up camera to the reverse lights. On the site it says not to but curious if you did and if it works fine. Thanks.
I have done lot of same work now I'm working on the muffler next is the inside just got all the parts today more tomorrow once done I do a video for everyone to see
do lowering springs , really lower the car? I want mine lower but , I was thinking maybe just a little bigger wheels , the springs and the splitter will make it look lower
I'm looking for upgrades but my fusion is the 14 se 2.0 ecoboost turbo and it gets a 0-60 way faster than that if i dont spin her never timed her might do it today tho
Yea the 2.0 Turbos are quick!! and theres a lot of mods and tunes you can get for them out there. Like Livernois I hear. But unfortunately my 2.5L has little to no room for power improvements. But my MPG is good haha
Hey men! Your fusion looks stunning!! I’m thinking to buy a 2017 hybrid, and looking at your video, I’m in love with the car right now. I really want it. Do you have more pics of the car?
@@luboymx thats great to hear! How is the shifter working for you caue honestly I still have some doubt with the rotary shifters since its different then the normal shifter knobs, how well does it work for you?!
Hi, I'm a new follower, I loved the work you did with that car, I have one just like it and I want to modify it so please could you give me the list of things to make it look like that, thank you and amazing work that you do
Do you have issues rolling up your windows with the auto vent shades? I bought the same ones for my 13 fusion and the window senses the visor so it won’t roll up all the way.
Very Rarely, id assume once every 3-4 months ill roll up a window and it will hit then it auto rolls back down. Normally in the Summer months when shit melts out here in the AZ heat. 😂 lol.. I think they droop and move around in the summer.
Yup that is correct you don't need to change sockets or any adapter. At lease I've never had to in any of my vehicles or my families vehicles. The only thing you have to check is your clearances, because more often than not, LED bulbs have a big heat sink on the back and you have to make sure it will fit in the area where your head light is. Or in some cases like the Jaguar, it has to fit inside the Headlight housing and cover.
Where the fack do you get parts at I can’t even find a replacement for the plastic that runs down the bottom side of the car body rocker panel spoiler thing I keep looking for fusions in a junk yard fir parts but no where near me in sc guess that’s a good sign Though
They vary depending upon what type... I want to jump up to 19s which means I’ll need a whole new set of tires too. When the time comes I think I’ll have to drop between $1000-$1500. But maybe I’ll find a used set off FB marketplace 🤞
@@EverythingAvron awesome man! Can’t wait to see that. I have a 2020 Ford Fusion with regular silver rims, not sure to paint them black or get black rims hmm
I just recently bought a 2013 Ford Fusion, the side skirt is cracked and the key cover is missing. I was wondering where to get replacements, where do you recommend?
For the side skirt... Id say check local junk yards and maybe you'll get lucky finding a fusion with one you can take from. Other wise Ebay will be where id go... but you'll probably have to get it painted
So no and yes..... No they don’t once there fully on they stay constant and look great.... but the fusions somewhat dim in and dim out as it transitions from off to on..... so since the LEDs are more sensitive to voltage change, if you stare hard enough you can kinda see a slight “stepping” down or stepping up.. you know what I mean?....But Im not sure if that’s what your facing?
N.A.T.I Nutrition www.amazon.com/Lightdu-Puddle-Lights-Explorer-Everest/dp/B07CJG56XJ this is the link to the puddle lights all the links to the mods are on the description of the video
There’s not much you can do to a 2.0t eco boost if you’re looking for plug and play. Suspension, exhaust, intake, tuning chip, fuel type, is pretty much it. Unless you know a lot about cars and wanna do some crazy mods that involves designing things yourself.
So there are 3 self tapping screws on mine which attach to the middle section of the splitter. The sides have 3M Automotive tape which you make sure the surface is very clean and free of Wax, then you just stick the sides on with the tape. Hope that helps a little bit?
Hey bro. Great fusion. I swapped my headlights for led and now when I put my turn signal on the headlight blinks with it. Tried capacitor and have the anti flicker adapters connected, but Still flashes with blinker. Any ideas?
Mine also do slightly flicker a bit... I believe it’s just because the LEDs are very sensitive to Voltage changes and when the incandescent blinkers turn on they pull a lot more power and the LEDs flicker from the power fluctuations.
Yoooo you should see my 2018 fusion, black and silver gang! I actually have the exact same grille as yours! Its fire i love it but man was it a bitch to put on with all them bumper screws!
Heck yea! thanks for the support never thought that people for around the world would be tuning in! Appreciate it! I got more Fusion Videos coming up so stay tuned.
Cold air intake, exhaust, down pipe, intake manifold and throttle body spacer, blowoff valve (get the boomba one), front tower brace, rear sway bar, tune.
Verdict seems to be Air Intake would be the mod for you....... If you really want to get faster and sound better, we should both go get those Twin Turbskie Fusion Sports lol *tempted*😬
@@EverythingAvron I had that same engine in a 2010 fusion. I didn't like how slow it was so I traded it in for a 2014 fusion titanium 2.0 ecoboost and I love it. Your car looks pretty sweet though
yea... mine is a Turtle haha.... Which is why I have my truck, the EcoBeast lol Im working on a video with races I've done in the truck which will surprise most how quick it is. Stay tuned.
You have yourself a blank canvas the way I see it!. Your car is prepped and ready for you to thrown your imagination at it! Im always thinking of "what can I do to make this stand out" the second I get a vehicle!
I felt that “makes it look fast, but it’s not fast at all” 🤣
Yup struggle is real, I may not beat you in a race but I'll sure beat you in a Car Show!
Trophy for the shittiest car there
@@Warsaw094 lmao I bet you drive a Prius 🤣
I've been looking at chips.. I have a 17 fusion se 2.0.. a 500$ chip will add 50 hp and comes with a warranty if ur motor blows up. Just an idea
My pops always said, “If it don’t go, chrome it!” I drive a Fusion Hybrid so I’m right there too.
Just got a white 2017 ford fusion se & tint and black wheels are a must for me
Coming from a white 2016 se owner tints are a must😂🙌🏽 wheels as well💯
Really nice looking fusion , looking to mod mine , and I’m so glad the newer 2019-2020 fusions are super easy to change the light bulbs now I know how much a pain it is when you have to take the whole bumper off just to change the bulbs
It’s friggin ridiculous! I’m glad they changed it too! I’ve been wanting to upgrade my Highbeams to LEDs too. But I haven’t because that damn bumper removal
You forsure wasn’t lying about how slow this car is. Bought the 2013 a few months ago because I liked the way it looked, and planned to customize it similarly to how this one looks.... but i was admittedly a little upset when I realized it took a legit 15-18 seconds to go from 0-60 😭. I wasn’t expecting a race car but I’m struggling to keep up with Civics 💀
haha yea I know but she's a looker. not so much a fighter haha
@@EverythingAvron lol yea definitely a good looking point A to B car
Something is wrong. With my G-Tech the wife's ripped off 7.5 sec. 0-60 several times in a row in both directions with 3 people and a full tank of gas on my level road I have used for years. It a DGI 2.0 with the dreaded DCT.
For comparison, btw, our Z3 on the same road does 0-6 in ~ 6.5 sec.
@@edschilling2725 idk if anything is wrong, I think Ford just made the car is slow lmao. I saw someone super charge one of these n it took him 11 sec to go from 0-60 😂
I have a titanium that came with 19”s from factory, and with them on a lowering kit closes that gap majorly, you might even have to roll your fenders slightly
I’m jealous. I can’t wait to make mine look this nice
piece by piece bro, just knock out a lil at a time.
Same
Excellent video. I like that you have credited all the sources for your mods and that you kept your car somewhat " stock/factory " with things like painting the existing wheels, adding the fog lights from another Fusion, and modifying the tail lights with " masks ".
My Fusion is also silver, and this video has given me a few ideas for when I start to modify it (I just picked it up a few days ago). I really like the wrapped roof.
Thanks! 👍
Ext Door handles, handle cups are now on my list TY
It's been a few years, how has the door handle covers held up? I'm also in AZ, and I always imagined the hot sun might weaken the adhesives and one day instead of pulling the door open, half the cover will just pop off.
Loved this video bro, so amazing to learn all the awesome things you've done to this Fusion, BRAVO, great job! So glad I subscribed to your channel! Question, your headlights, how did you manage to tint/darken the orange-colored turn signal light inside the headlight?
He says right in the video that the front markers (the orange " triangular " piece) has tinted film on the outside. He did the tail lights the same way as well as the redundant turn signals in the mirrors.
Awesome, thank you!... and I bought just some tint off amazon and tinted over them and cut the outline with a razor.
With the mods it will definitely help your speed because I don’t have many but I have some and The speed is definitely there
You did a great job with the vinyl piece on the hood. It looks perfect.
Thanks gonna have to take it off and do it again soon lol let’s see how the 2nd run goes.
Love your fusion bro🙏I have a ‘14 and working on making it look similar to yours with the black and silver. Looks amazing
much appreciated bro!!! yea spent alone of time customizing her! its a fun process! I bet yours will look sick too!
On the headlights, you can actually loosen the lens just enough to squeeze your fingers through and get to the bulb. I put in LED’s but it was a pain. Easier than removing the number though
A lot of your mods I have wanted to do for a long time. I like the headlights and fog lights. I also want to put in a 1" spacer on my wheels. I think flushing the rims with the edge of the wheel wells would look great! Nice work! Keep up the good work.
Thanks bro!
Bought a 15 last week.. Great vid. Thanks for ideas
No problem 👍
Thanks for putting the parts you bought great video
No problem 👍
I have a 2015 2.0L eco boost. I’ve gotten a tuning chip on, intake, it’s gotten a bit faster not a lot. About to wrap it in gray color and apply ss tuning wide body mode but gotta find 20*19 wheels first
ohh heck yea! sounds like its going to look amazing!, follow me on Instagram. and ill follow back. I'd like to see the wide body look!
Dude! Get a Tune from Livernois Motor Sports and the K&N intake. That alone adds about 30hp and does wonders for your gear shifts.
I would but my car just won’t get much improvement in power haha... now my F150 on the other hand. That’s my power monster!
The k&n intake is whats in mine it looks beautiful nestles inside
These 2.5s get a nice bump in power from an intake and tune. The tune also dramatically improves shifts.
Dope I’m about to start modifying my 2014 fusion
Never a better time then now bro 👍
Finn start modifying my 15 fusion! Goodlook bruh
Another thing you should do is a muffler delete, I have one and it’s sounds mean, is loud and it doesn’t sound like a tin can!
Great suggestions! I totally would have, but I can't anymore sadly..... you'll see why soon *Foreshadowing*😞
Bought a 2-14 FF hybrid a few months ago and was looking into some things to make it just a little different, I was liking your video because most of the mods were just slight changes but I had to insta like and sub for the NMSU plate ring, more of a lobo fan but I support all NM. good looking car though
I have been looking for a grill like yours. Can you tell me where you found yours at? The car looks amazing!! I have a 2018 and I’m about to start modifying mine as well (I’m sorry I commented before watching the whole video 😬 the car looks awesome!
Check out my description field of the video.. I have a direct link to the grill I bought.. however you will have to find the one for your 2018 model because they won’t be the same
EverythingAvron thanks so much for the reply!! I finally tracked one down and ordered it for my car! Hopefully I’ll get it put on soon!
Bruh i have thee same car and I had this idea in my mind and then I saw your video and I was like BRRRROOOOOOOO 🤣
Haha perfect! just because I did it doesn't mean you can't! Do it! get it vinyl wrapped! I love the aggressive body lines of these Fusions and the Vinyl just accentuates them even more!
Oil catch can is a Must if you have a Turbo engine to keep carbon buildup out of engine. You must have the non turbo 2.5 engine bc even the 1.6 turbo engine has like 180 hp not quick but not Hella slow.
I love it but why keep it on stock wheels? Cause they look spray painted not bad but it would be better with some aftermarket wheels I have a 2013 fusion and i love it just wanna get more ideas love ur man
Na the stockies are temporary I will for sure upgrade eventually haha
EverythingAvron yeah I feel that man I was on stock wheels and spray painted them so that’s why I was saying I love it tho it’s a better build then mine without a doubt and If u do get aftermarket wheels ur car is just gonna get better lookin keep it up
Hi great video.. Ive just bought a 2015 ford mondeo is the fusion the same as the mondeo? As it looks the same?
Yes very similar practically identical! similar situation to our Hyundai Accents and Hyundai Verna same car, just sold in different regions
So I can order anything 2016 fird fusion for my 2014, so I'd be able to get the newer mirrors with the blinkers? Such a pain the ass just finding stock Alloy rims for the '14
you always have to double check when it comes to wiring and connectors if your vehicle is compatible. But mechanically yes 2016 Fusion parts will fit on your 2014
@@EverythingAvron What about my 16's? Can I technically go up to 17's or 18's? I hear the bolt pattern is pretty much a pain to find (5x108). I know i have to watch for room wise and 18's would work but is a stretch? I just want my 14 to look more up to date, so I'm glad I found this channel
Hey nice video bro! I appreciate the walk thru of all your mods. Not many Fusion vids on YT! I have a '16 2.5L so I feel your pain w/the lack of power, but the K&N intake gives it a bit more giddy up...or at least produces the sound to make you think so! lol peace brotha
Thanks bro! yea I just may do that Intake upgrade at least. for the sound. If I do Ill for sure record the install!
@@EverythingAvron
What, you don't like that angry leaf blower sound? I have the 2.5 also, I can't decide if the car sounds like a leaf blower or what a Prius might have sounded like with a gas engine instead of the hybrid powertrain.
Looks great, maybe will see it sometime in AZ when I am driving around :-)
I regret selling mine 3 years ago but I do love my 2017 maxima sr good job btw 🤙
Can always get another!!!! 👌
I’m so glad I found this channel! I own a 18 Platinum! Also I think the Mondeo Vignale 19” Rims would look great on Yours! The Vignale are just 19” Platinum Rims dipped in Gun Metal. I used to have an 16 1.5EB SE and I hated that Turbo Lag but it rotated in corners like a Focus ST!
How did you installed your puddle lights and how many lights does it need for the headlights
You gotta kinda pry it out with a skinny screw driver.... you’ll see a lil notch where you take it out from. Then the new LEDs are a simple connection and push it back in
@@EverythingAvron there are UA-cam videos of puddle lights
I got a black 2017 still hooking it up. But it is fast!
Was it difficult to install the fog lights? I always wished I got the Titanium simply because of the fog lights lmao
No not at all it’s easy. you only need to get the fog light harness p/n DG9Z15K867B... the fog light switch p/n DG9T13D061BCW..... the fog lights themselves www.ebay.com/itm/193254333283..... and maybe some Bulbs if there not included. And it’s literally plug and play.
Liked video just for that intro jump
Haha and I was wearing Nike Slides! I live life on the edge 😂
When you used the 4dtech products did you connect the back up camera to the reverse lights. On the site it says not to but curious if you did and if it works fine. Thanks.
So I do believe I had the trigger wire plugged up to the reverse bulb circuit. and I didnt have any issues
You killed it bro
Thanks bro! appreciate the support
Idk about you but my 2016 is awd with a little bit bigger of an engine and idk if they all have the turbo but it is actually pretty damn fast
Yea... mine was the biggest engine but the lowest powered. mine was the 2.5L Naturally Aspirated with only 175 hp 😂
How is the ride on stock wheels after the 1 inch drop
Did you have to take your bumper off to replace the front upper grill?
Yes to make sure the grill clips in properly you have to take off the bumper
@@EverythingAvron is it possible to do without?
I have done lot of same work now I'm working on the muffler next is the inside just got all the parts today more tomorrow once done I do a video for everyone to see
do lowering springs , really lower the car? I want mine lower but , I was thinking maybe just a little bigger wheels , the springs and the splitter will make it look lower
Yup the H&R lowering springs I did on mine gave my about and inch drop front and back... make sure you get an alignment after too
@@EverythingAvron thanks Sm bruh, I love ur car
What’s the link to the backup camera
Bruh what kind of fusion you got mine accelerates fast
You try sport mode ?
I dint even use it but it takes off
I got the turbo
I'm looking for upgrades but my fusion is the 14 se 2.0 ecoboost turbo and it gets a 0-60 way faster than that if i dont spin her never timed her might do it today tho
Yea the 2.0 Turbos are quick!! and theres a lot of mods and tunes you can get for them out there. Like Livernois I hear. But unfortunately my 2.5L has little to no room for power improvements. But my MPG is good haha
One question, where you get those sunglasses from?? I want a pair.
Oakley Store in Scottsdale AZ!.
Hey men! Your fusion looks stunning!! I’m thinking to buy a 2017 hybrid, and looking at your video, I’m in love with the car right now. I really want it. Do you have more pics of the car?
I some photos on my instagram of it!. feel free to go follow me on there see all the ones I took. Link is on my main profile.
So did you happen to get that car, cause im thinking of getting the same
@@關英辰 yes! And I’m really happy with my bby!!
@@luboymx thats great to hear! How is the shifter working for you caue honestly I still have some doubt with the rotary shifters since its different then the normal shifter knobs, how well does it work for you?!
Hi, I'm a new follower, I loved the work you did with that car, I have one just like it and I want to modify it so please could you give me the list of things to make it look like that, thank you and amazing work that you do
All the parts are in the description. It's a nice car for sure but I'd rather start off with performance upgrades rather than just visual upgrades.
Thanks! Yea all the links to the stuff I bought is in my description field! but shop around too, different sites have different prices.
Do the tutorial how to paint rims they look good bud
Hate to break it to you but most fusions can hit 60 in about 8 seconds instead of 10. Including the normal 2.5l I4
maybe I was running up his haha🙄
Do you have issues rolling up your windows with the auto vent shades? I bought the same ones for my 13 fusion and the window senses the visor so it won’t roll up all the way.
Very Rarely, id assume once every 3-4 months ill roll up a window and it will hit then it auto rolls back down. Normally in the Summer months when shit melts out here in the AZ heat. 😂 lol.. I think they droop and move around in the summer.
Hey, when converting to led fog lights and head lights, just have to change the bulb? No changing sockets ?
Yup that is correct you don't need to change sockets or any adapter. At lease I've never had to in any of my vehicles or my families vehicles. The only thing you have to check is your clearances, because more often than not, LED bulbs have a big heat sink on the back and you have to make sure it will fit in the area where your head light is. Or in some cases like the Jaguar, it has to fit inside the Headlight housing and cover.
Damn 10.3 you weren’t kidding
Yea I know... the 2.5L is the heaviest and the lowest Hp of this year of Fusion 😒 haha
Are the headlight significantly brighter
Yes they for sure are. And the fog lights are extremely bright too
Where the fack do you get parts at I can’t even find a replacement for the plastic that runs down the bottom side of the car body rocker panel spoiler thing
I keep looking for fusions in a junk yard fir parts but no where near me in sc guess that’s a good sign
Though
hey what brand of bulbs is in your drl like the parking lights bulbs
They're literally just generic brand T10 LEDs off eBay. I can't remember how many LEDs but think there 24 LED bulbs
What’s your tint, looks great
5% all the rear with 5% visor. Driver and Passenger doors "35%" cough! cough! :)
How much would a set of those rims be?
They vary depending upon what type... I want to jump up to 19s which means I’ll need a whole new set of tires too. When the time comes I think I’ll have to drop between $1000-$1500. But maybe I’ll find a used set off FB marketplace 🤞
@@EverythingAvron awesome man! Can’t wait to see that. I have a 2020 Ford Fusion with regular silver rims, not sure to paint them black or get black rims hmm
Can you make a video on how to install the reverse camera please?
Check this one out!. ua-cam.com/video/_HS602YPbXk/v-deo.html
If I have a Ford Fusion SEL can I get the same mods as your car???
if its a 2013 or 2014 I'm sure all the trims will have the same aesthetic mods
I just recently bought a 2013 Ford Fusion, the side skirt is cracked and the key cover is missing. I was wondering where to get replacements, where do you recommend?
For the side skirt... Id say check local junk yards and maybe you'll get lucky finding a fusion with one you can take from. Other wise Ebay will be where id go... but you'll probably have to get it painted
My ford fusion 2014 titanium 2.0 not that slow. I did 0 to 60 in 4.3 sec
yup... the 2.5L naturally aspirated are the slowest spec of the Model
When you installed your puddle light do they pulse? I bought some off eBay and installed them but they pulse. Any idea as to why that would happen?
So no and yes..... No they don’t once there fully on they stay constant and look great.... but the fusions somewhat dim in and dim out as it transitions from off to on..... so since the LEDs are more sensitive to voltage change, if you stare hard enough you can kinda see a slight “stepping” down or stepping up.. you know what I mean?....But Im not sure if that’s what your facing?
@@EverythingAvron well mine pulse and it's very noticeable I wonder if it's the type of light I'm using
@@EverythingAvron would you be able to send me link where u got yours?
N.A.T.I Nutrition www.amazon.com/Lightdu-Puddle-Lights-Explorer-Everest/dp/B07CJG56XJ this is the link to the puddle lights all the links to the mods are on the description of the video
Man I need help tuning my 2018 Fusion titanium idk where to start just want it faster lol
Bro I wish I had a titanium! Haha I only got the 2.5L NA and as you saw in the video it’s not fast at all hahah 😂
EverythingAvron lol I’m going to put a cold air intake see how that goes, your fusion is sick though!
@@EverythingAvron shoulda got a 2.0 turbo
There’s not much you can do to a 2.0t eco boost if you’re looking for plug and play. Suspension, exhaust, intake, tuning chip, fuel type, is pretty much it. Unless you know a lot about cars and wanna do some crazy mods that involves designing things yourself.
Where did u purchase the bottom lip bumper ?
Got it off eBay.. I got an affiliated link available to you all in the description field here.
Hey man I noticed the 2010-2012 fusion in the back could you please make a video on of those. I have one and really want to customize it
I would!... but...... check out this video , you'll see why I can't anymore 😞 ua-cam.com/video/CTpAbW50OlA/v-deo.html
Do you have the link to your seat covers?
unfortunately I don't.... funny story is I literally got those seat covers from Ross in the little automotive aisle!😅
How did you install the front splitter?
So there are 3 self tapping screws on mine which attach to the middle section of the splitter. The sides have 3M Automotive tape which you make sure the surface is very clean and free of Wax, then you just stick the sides on with the tape. Hope that helps a little bit?
Hey bro. Great fusion. I swapped my headlights for led and now when I put my turn signal on the headlight blinks with it. Tried capacitor and have the anti flicker adapters connected, but Still flashes with blinker. Any ideas?
Mine also do slightly flicker a bit... I believe it’s just because the LEDs are very sensitive to Voltage changes and when the incandescent blinkers turn on they pull a lot more power and the LEDs flicker from the power fluctuations.
EverythingAvron I appreciate it. I’ll see if I can find a way to fix it. I heard the BCM would have to be replaced. But who knows.
get 40 offset and 8.5 width rims and that should fix your fitment
For sure... looking to upgrade my wheel n tire package next year! I’ll keep those specs in mind
Yoooo you should see my 2018 fusion, black and silver gang! I actually have the exact same grille as yours! Its fire i love it but man was it a bitch to put on with all them bumper screws!
Great car, great video bro. Salutes from Brazil.
Heck yea! thanks for the support never thought that people for around the world would be tuning in! Appreciate it! I got more Fusion Videos coming up so stay tuned.
Which model and engine you have in your fusion?
mine is the 2014 Ford Fusion SE with the 2.5L naturally aspirated engine.
2019 fusion se any mods to make it slightly faster and sound cooler ? 😫
Cold air intake
J.T. Lightner noted, thanks
Cold air intake, exhaust, down pipe, intake manifold and throttle body spacer, blowoff valve (get the boomba one), front tower brace, rear sway bar, tune.
Cold air, I got the AEM intake system. I love it, makes the turbo sound better and the performance is slightly better.
Verdict seems to be Air Intake would be the mod for you....... If you really want to get faster and sound better, we should both go get those Twin Turbskie Fusion Sports lol *tempted*😬
What chin splitter is that?
I got that Splitter off eBay for about $70.... I have the direct link here in my description field. Look for "Gloss Black Front Lip Splitter".
This the 1.5, 1.6 or NA 2.5?
This is the 2.5L naturally aspirated
@@EverythingAvron I had that same engine in a 2010 fusion. I didn't like how slow it was so I traded it in for a 2014 fusion titanium 2.0 ecoboost and I love it. Your car looks pretty sweet though
What tint is this ??
5% in the back, 20% in the front, 5% Windshield Visor
What...no sound system upgrade??
None yet. But Eventually I will!
My 2016 does 0-60 in 6.6s in sport and 7.04s in manual sport....
yea... mine is a Turtle haha.... Which is why I have my truck, the EcoBeast lol Im working on a video with races I've done in the truck which will surprise most how quick it is. Stay tuned.
Mine goes 0-60 in 4.4 secs i have the 2.5 se.
Will all this work on a 2013 as well?
Yes 2013 is pretty much identical to 2014s
Here from Facebook😜
Heck yea! Appreciate the support 👍
Me watching this with a 2011 Fusion
👁 👄 👁
Customize yours up!...my wife had her a 2011 and I begged her to let me modify hers..but she said no lol 😔
I can’t wait to pimp my ride😭
Do it! don't wait!!!
No word for Ford
U should buy the wide body kit off aliexexpress and review it
Eventually ill add more aesthetic Mods to the Fusion... But right now I got a few mods coming for the F150 EcoBeast! Stay tuned into that Playlist
TUNNING FORD EDGE BRO
The 2016 version are fast asf 5 secs to 60
Nothing to the motor? At all?
not a darn thing to the motor haha... She was just a pretty cruiser haha... my F150 is the bruiser now!!! go check that out!👍😁
A 500$ chip will give a 2.0 EcoBoost around 50 hp. Js
Mine is exactly like....the original.
You have yourself a blank canvas the way I see it!. Your car is prepped and ready for you to thrown your imagination at it! Im always thinking of "what can I do to make this stand out" the second I get a vehicle!
"i actually, i actually, actually, actually, ACTUALLY"
I actually noticed I say “I actually” a lot ha😂. Never really caught it until I heard myself in my vids. Lol
HIII broo From MEXICO
Hi thanks for tuning in!
🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Y love Ford Fusion Y love yuo barber
thanks appreciate it!
Dont get 19in wheels! Fusions with 19in wheel eat tires
hahaha 😂 ok *noted*
Weathertech bruh
Haha those are excellent too.. I just didn't want to pay the "WeatherTech" price lol
If you're going to buy a fusion to add "performance parts" you might as well just buy a 2017+ Fusion Sport. Lol
haha maybe I will!... you'll see why soon, in an upcoming video *foreshadowing*
Noo its your thats slow mine dont take that long 😂😂😂
Haha what’s your 0-60... maybe I was going uphill 😂
ARMENIA...
FORD FUSION