iPhone 7 no mic audio IC problem
Вставка
- Опубліковано 2 жов 2024
- iPhone 7 with the common problem with the audio chip that causes all the microphones in the phone to stop working and most of the time a boot loop problem and stuck on apple logo.
You can send your device for this or any other repair.
contact me here:
itouchrepairservice@outlook.com
Or simply you can contact me on facebook or instagram link below.
Instagram:
...
And on Facebook:
/ itouchpro
key words:
iPhone 7 audio problem
iPhone 7 mic not working
iPhone 7 boot loop
iPhone 7 stuck on apple logo
how to fix iPhone 7 no mic
iPhone 7 no mic audio problem
iPhone 7 keeps rebooting
iPhone 7 no sound
this seems very consumer friendly, lemme try
🤣🤣🤣😂😂😂
How much of a good idea do you reckon this job is to attempt for your first micro soldering job.
you got this bro ; )
You are my teacher from today :) because i saw your video and I've successfully changed the audio ic. Thanks Sir!
Where are you located and how much to replace an iPhone 7 Plus?
Wow! You make it look so easy... appreciate the video👍🏽!
I have the same issue. I’m located in Venezuela, where can I send the phone to repair and much will it cost ?
i went to the apple store and they said it would cost $419 to fix. Are yu sure they would fix it for free?
They won’t unless you have a warranty
Hello,I have an iPhone 6 which has a weird mic problem ,it records on vocal memo and all audio apps,Siri can hear me but as I start a call the other interlocutor can’t hear me in any way...can you tell me if there’s something I can try? I have no pro repair shop near me :(
Christian Pucciarelli same problem i have iphone 7 plus
Christian Pucciarelli same problem i have iphone 7 plus
Kindly mentioned charges
At 5:35 you used a plate of holes to make the IC solder , fron where can i get it ?
Hey how much do you charge to fix it
What's the name of the second song?
What kind of parts do i need to change if i got this problem?
no parts just the skills
and tools
Had this issue in January 2022 with an IPhone 7 that was with my sis (which is still fast to very this day I find). However, I wanted to see whether doing the reflow first would solve the issue before trying the reballing/ jumper fix route. Applying flux and using a heat gun solved the problem in my case. I am pretty sure that the battery degradation (heat) is the culprit.
Hi bro, in my poco f1 if i call anyone opposite person is hearing there voice back as echo in high level but i can hear there voice clearly without echo, when i reduce my speaker volume then they will feel that echo is bit lower and when i muted they will not here any echo issue.... I have tried changing the mic as well but no luck please suggest something to resolve the issue
how much may cost this fix man?
how to fix error 4013. i have rebol mmc ic but its again showing error 4013.
hi you can watch this video and check the caps that she was talking about if those caps are shorted then you cant do anything
ua-cam.com/video/a_DlvDeArKc/v-deo.html
Hello, what was that black powder you used, and where can I get a cutout like that??
how is it when I opened both my phones the home button no longer functioned but you simply put yours back together and the home button still functions?
Can u list those liquids you use when detaching it and re attaching it, and what is that template looking tool for re soldering called where can i get one and or any other tools you used please
Thanks allot 👌👌👌👌👌
What about the loud speaker, was it working before ?
yes the loud speaker doesn't have to do with this problem the loud speaker will working even if the audio chip is not installed
I’m facing the same problem over a week , I thought it’s software problem , thanks anyway , how much it costs to repair it ‘in apple care ‘ , if u know pls respond
It is supposed to be free, apple ppl put an exception for this
beautiful soldering work
What is the green product that you use...?
Same problem in my I phone 7 can u suggest me where be repaire in Bhopal
How would he know that??!
how much u charge for fixing this?
Whats the heat temperature for unsold the ic chip and whats the temperature to solder back ?
on each soldering station is different temperature you need to set minimum temperature and exercise on an icloud motherboard and see what is the perfect temperature for removing and soldering it back (which will be lower temperature than removing)
Anyone knows what liquid he put frequently on the audio ic?
probably just flux
А массу продублировать?
OK , where do you get a wire as fine as that joining wire for the missing pad? I found the finest hook up wire i could and used one strand and that looked like it was 4 times as thick as your wire. Also , when heated again , what stops the new track pad wire from moving ? Do you glue it in place and if so, what glue is that small?
Hi, I am using a phone's speaker coil. I would recommend the upper speaker because it has a smaller coil and a thinner wire you can use.
And yes, I use a special glue (or a mask) as we call it in the business.
it can handle high temperatures and it doesn't smell when heated.
you can search for it on aliexpress or if you have an electronic store in your town.
@@iTouch-repair
Many thanks for the fast reply . I am only doing this as an exercise to see if a normal person ( as opposed to yourself with superhuman powers ) can do it .
Obviously I wouldn’t need much special glue . Can I use anything else to tack it there. I’m also amazed how it stays there when you solder it .
One other thing , how did you clean all the board so well? Is it alcohol on the cotton wool to clean old flux off ?
Your solder wick must also be miniature as normal solder Wick is way larger than the ic pad .
One more question,
Is it a iPhone 7 Plus mechanical pcb fault that that pad breaks off or is it vibration from dropping the phone that does not help the situation ?
@@Dentinvent well it’s both, it’s a factory fault that leads to this problem when dropping the phone.
But in many cases it’s a factory fault. I had many phones that doesn’t show any signs of fall or hit and there was no sound.
@@Dentinvent well any other glue when heater it will come of. You can try nail polish, it drys under an ultraviolet lamp so you need that kind of glue.
As for the soldering wick you can cut it to make it smaller so it can fit the chip.
2:13 what liquid is thia
Pee
Great Job body
you are a teacher
Great work man.
which microscope are you using?
i am using an amscope microscope
JayDonKay sir how Temperature set on heat gun and also air flow
Where are you locates
Can some one give me a full detailed description of hw the audio ic affects the device ?
Hi, yes of course.
the problem is that apple have made all of their iPhones like this.
like this means that the phone wont be able to boot anymore with out the touch ID and the front camera flex that also has the light sensor and the stereo headset.
And when this pin is damaged or disattached from the board which makes the audio IC not connected to the CPU so the CPU thinks that the front facing camera is not connected and this stops the phone from turning on.