CoDeSys PLC as OPC UA Client using Data source Manager OPC UA Server &

[@kaizokudc]

Hello Sir, When I add the data source, there is no OPC UA server among the options, only codesys applicationv3. How do you achieve this?

[@jugaadtech12]

You need to upgrade the version of CoDeSys this particular feature is available from 18.2
www.shaswatraj.com/post/codesys-as-opc-client-using-data-source-manager

[@kaizokudc]

Hello sir, thank you very much I understand. Is there another way that I can set codesys as an opc ua client, that is, read data from another source (opc ua server)?@@jugaadtech12

[@jugaadtech12]

Yes there are other ways also ...you can use OPC UA client library by codesys using which you can write full programs and connect to OPC UA server....
If you want out of the box then you can also use Node-Red

[@kaizokudc]

Hello sir thank you for answers, is there any video or document for OPC UA client library by codesys?@@jugaadtech12

[@jugaadtech12]

forge.codesys.com/forge/talk/Engineering/thread/c9540f7745/4beb/0802/9cda/714d/474a/1f0a/2ca8/attachment/OPCUAClient_Example.projectarchive
This project I shared ...try with this

[@enesdukan]

i dont have opc ua at data source type. how do i add it

[@jugaadtech12]

I think you have old version of codesys , try to upgrade codesys version it will come . I have used codesys v3.5.18.2

[@LiamBeeMe]

@@jugaadtech12 - I'm using V19 and its still not there

[@jugaadtech12]

Somehow comment got missed:
I checked on version 19.4 and it is available , which version of v19 you are using ? you can check at link www.shaswatraj.com/post/codesys-as-opc-client-using-data-source-manager