Spyder Auto Installation: 2005-2011 Toyota Tacoma Headlight

Поділитися
Вставка
  • Опубліковано 4 січ 2025

КОМЕНТАРІ • 36

  • @deplorablechump8758
    @deplorablechump8758 3 роки тому +3

    Good instructions. Ordered my lights. Thanks!

  • @David-em6cu
    @David-em6cu 3 роки тому +5

    link to purchase?

  • @farmermike9262
    @farmermike9262 2 роки тому +2

    Does the turn signal lights stay in the on positon ? And can LEDs be used in the low/high beams?

  • @cpsmonroe1
    @cpsmonroe1 4 роки тому +7

    Any reason not to test that everything is operational before reinstalling grill and hardware?

  • @christopherflores6137
    @christopherflores6137 2 роки тому

    Awesome Video! Please do an install video for the 2012-2015 Toyota Tacoma Halo Projector Headlight Bar DRL. Cheers!

  • @stevenvision3612
    @stevenvision3612 4 роки тому +8

    I just installed these lights but the drl lights aren’t turning on? I’m pretty sure I got it wired correctly all 3 cables

    • @WickedMedia978
      @WickedMedia978 Рік тому

      I installed my directional connector, the one where you remove the bulb and connect to the headlight, incorrectly. Make sure the green wires are on the same side when connecting

  • @MaryandTheJeepCycle
    @MaryandTheJeepCycle 2 роки тому

    Good video needed close ups though! Just installed my lights

  • @YarmilaGoycochea
    @YarmilaGoycochea 2 роки тому

    Thank you this headlamps come with wires lose under headlamps this is for connecting in fog light??

  • @TheRoamingHazard
    @TheRoamingHazard Рік тому +1

    Really? The cool looking LED bracket lights are a parking light? And since I have a manual they just never come on....
    NM I guess they were connected backwards. Mine come on with the headlights, no park light for stick shifts obviously.

  • @DarkSeraph351
    @DarkSeraph351 4 роки тому +3

    I have a CCFL Halo headlight from Spyder for an 09 Tacoma that re-uses the side marker bulb (there isn't an LED connector that plugs into the side marker socket like in the video; the LEDs get wired to the side marker wires) and I can't get the side marker socket into the headlight assembly. It seems that the hole in the back of the side marker reflector is too small for the socket.

    • @dustindobbins2236
      @dustindobbins2236 2 роки тому

      Did you ever get this figured out? I’m dealing with the same problem

  • @youdaman1410
    @youdaman1410 2 роки тому +1

    i have a 2010 tacoma sport...it has no daytime running lights...is that a different headlight i need to order?

    • @WickedMedia978
      @WickedMedia978 Рік тому

      Make sure the turn signal bulb socket has the green wires on the same side. I had mine 180° in the wrong direction.

  • @eddielinares6510
    @eddielinares6510 2 роки тому

    Thanks, your video was very helpful

  • @cruzitovlogstrd
    @cruzitovlogstrd 3 роки тому +2

    I bought some from here and the strip on my headlights doesn’t turn on only the light bulbs

    • @montezwilliams5529
      @montezwilliams5529 Рік тому +1

      Same here. Any solution?

    • @WickedMedia978
      @WickedMedia978 Рік тому

      @@montezwilliams5529 I had my turn signal connector installed 180° in the wrong direction. The one you remove the bulb from, make sure the green wires are lined up.

  • @jeremyweaver4383
    @jeremyweaver4383 3 роки тому +1

    In the end of the video when testing the lights you say that the parking lights (amber lights) which are also the hazard/ turn signal lights are the daytime running lights and the ccfl rings are the parking lights. Isn't the ccfl rings the daytime running lights?

    • @whatfreedom7
      @whatfreedom7 3 роки тому

      I think your right. idk if they are designed wrong of it they just goofed in the video. You can’t have a white parking light because it’s illegal it has to be amber. In the video I couldn’t tell a difference in the lower light brightness in the one that should be parking and turn combined either. That should be the parking turn combo.

  • @_freddybautista
    @_freddybautista 2 роки тому +2

    Just got mine in, can’t wait to install 😭

    • @GeeMoneey760
      @GeeMoneey760 2 роки тому

      How did the install go?

    • @everc9674
      @everc9674 Рік тому

      What’s the brand of this headlights?

  • @josephlahood4647
    @josephlahood4647 3 роки тому

    I'm leaving those two inner fender 10mm bolts out. I've had them out several times and always put them back in. Not this time

  • @tanner5209
    @tanner5209 4 роки тому +1

    Which bulbs can be used to switch out the Halogen bulbs for low beam? HIDs?

  • @chargerchargers7968
    @chargerchargers7968 2 роки тому

    Does it retain original bulbs sizes,because I bought an aftermarket set up,whichever it didnt occurred to me,bought h4 led bulbs,but new set up came with h3 bulbs...

  • @biggcrazy1
    @biggcrazy1 Рік тому

    So my marker light socket are to long how did u get them to fit 2011 toyota tacoma

    • @spyderauto
      @spyderauto  Рік тому

      For any issues or questions about your Spyder product, reach out to our tech support team techsupport@spyderauto.com

  • @willtacoma2ndgen661
    @willtacoma2ndgen661 3 роки тому +1

    How much for these led headlights

    • @taylorwilson2113
      @taylorwilson2113 3 роки тому

      I paid like 230 for mine

    • @whatfreedom7
      @whatfreedom7 3 роки тому +2

      @@taylorwilson2113 how long have you had them? Curious how long they last and how long it resists oxidation.

  • @alainjsanchez6212
    @alainjsanchez6212 4 роки тому +3

    WILL YOU GUYS MAKE CUSTOM Headlights for 2007-2014 lincoln Navigator ????

  • @djplays4007
    @djplays4007 Рік тому

    Any height adjusting needed for the headlight bulbs after install?