SolidWorks FL Tutorial
Вставка
- Опубліковано 10 вер 2024
- sw-tc.net/#282 solidworks tutorial complete PC fan with flow simulation, info at start shows tutorial sections. Flex feature may make the propeller more flexible to generate many flow cases to study. Don't forget to subscribe if liked the video for more advanced tutorials.
Used Coil tutorial l: • SolidWorks Tutorial #2...
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
This 2 hour tutorial on a fan ended up in my recommended. Great!
I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation.
I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable).
As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation).
This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade.
Now I know how to best mount my contact spokes for my Rotary Spark Gap!
Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot
Whats that Baloch in yua name.
SolidWorks Tutorial #262 : Rotor (coil wiring) 1:22:46
link : ua-cam.com/video/WbdnxArZQ3g/v-deo.html
Thanks men. I was scared.
Hey man will i make full motor or only rotor coil wiring made seperately?
Best Solidworks tutorials on the internet. Good music too.
Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need .
Thank you again :)
please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration
sirji great work please do upload this type of videos more frequently, thank you for sharing great knowledge.
Thank you sooooo much for this awesome flow simulation tutorial!!!!!!!!!
You forgot to make the inside wall of the fan blade a rigid wall as well
THANK YOU SO VERY MUCH FOR SHARING THIS EXPERIENCE WITH US, AND WISH TO SEE MORE
It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?
That is awesome video. It helped me a lot, to figure out how to do some operations.
I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?
Amazing work, by the way, I was wondering if you have some tutorials related to CATIA's simulations?
They will help me a lot
I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks
carry on your work.... and very very thanks for sharing this knowledgeable videos...☺
great!! excelente muito bom , aprendi muito
Thanks for the excellent video, very informative. I ask you a courtesy, can you tell me which band is playing the background music? Thank you.
Cool. You did amayzing work. Thank you!
Hello sir, can i know why i cannot change the direction in rotating region even i put negative in the value. Hope you help me. Thank you.
Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming
How to simulate a waterwheel rotation without prescribing it's rotational speed? Like let it start moving due to river flow. Thanks.
Hey getting this error while running the simulation ""Warning! Unable to resolve the local rotating region". Can someone please help me to solve it?
how did you get that rotating regions
sir at 53:43 all things just messed up... cursor is moving in different direction, process are going in different direction.... i had a very hard time understanding those stages
Юб
MY VERTICAL WIND MILL PROJECT DETAIL
FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS
AIR DANCITY 241
WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND
HOW CALCULAT RPM
HOW MUCH RPM GENARATE
PLZ HELP
crazy
can you tell me that from where you have taken these dimensions? It's important.
Thanks a bunch
Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!
it was very help full, but 1 error is coming
when i set boundary layer for simulation it gives error its not a boundary between solid and liquid
i tried many different way by selecting rotation rei=gion as face and the frame as face
but how can you calculate the work done
on my computer, at the "wizard - Analysis Type" window, the rotation value didn't appear. could you explain why?
Did you solve this problem?
I having problems with the CUT-REVOLVER.........what is the distance???
hey... does anybodu know waht is the coloor or the material for the first piece???
Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?
A Question: Could you calculate the applied force on the fan blade's shaft?
Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!
@@Gillambryce Excuse me. Have you done the tutorial? Could you help me to solve some troubles?
@@leolopezc15 if you're asking if I can help you with cad software or simulations like these, no. I'm more of a technical guy
@@Gillambryce I think they wanted axial force not radial force.
@@londonnight937 you know what I think you're probably right
Good job 😀👏
What are the specifications of your Computer, sir?
Where are the links to videos of Motor, Coil and Ball Bearing ? Can somebody please reply with the links ?
Thank you
Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.
good job. Well done
Thanks for the video. What is the appearance you apply for each part?
Estoy impresionado, muy bueno!
Disculpe, he tratado de seguir el mismo procedimiento pero he tenido algunos tropiezos, ¿ha podido hacerlo?
Good video but, I have a problem with the command Circular pattern in the time 32:18. I do the same procedure but, only the blade appears a a result. How can I get a solution?
find any solution for that ?
Yes. First, I made the blade as it appears in the video. After, I used the circular pattern command and finally, I made the cylinder.
@@leolopezc15 good job figuring a way around it , but i found that you need to do the combine command and then doing the pattern for (body) not (feature), like as in the video.
@@user-zg2kr6ph9z Ok That's right. But, what I'm trying to explain there isn't an only way to make the blades. I'm learning Solidworks and there are a variety of commands that surprise me because they facilitate the design and make it faster.
@@leolopezc15 you can pattern one entity around it self and create a pattern, its an odd thing to grasp, but it comes in handy when doing such thing as a fan.
❤❤❤❤Excellent ❤❤❤❤
I'm having an error by trying to make a circular pattern on blades... "merge error" someone knows what could be?
I have combined all the parts as well
use body not faces & features
Nice
where can i find coil tutorial??
Great video. A bit slow tho, but on point. Good job!
Wow great video
Hola como cambias la dirección del vector adelante o atrás de los álabes? Cambiando el signo sólo cambia el sentido de giro de los álabes
Cool. Thanks
35:52 How do you rotate it like that?
It's space mouse. Worth 30,000 ₹ 😅😅
which version of this solidworks ?????
I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.
Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error)
Thank you
It would be helpful if you provide us the Coil file or make another video for it.
The rotor surface need set real wall(no-slip)
instructions unclear i have a fanblade in my nose
thank you !!
The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?
i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.
Yes you can, just press Import in 3DS and select polygon quantity.
this needs to have sound with it .. its quite hard to follow the tutorial with audio. Otherwise great tutorial.
Simulation seems wrong. Accelerating air should cause it to exit in a line - not "fan out"
Do you have a simulation of a Static Mixer tutorial?
What is yourr workstation specification?
I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏
Sir we have same fan
You have any idea to repair it
Hi, what GPU do you have
why i can noy enter your website?
Perfect
this flow animation is available in SW2012, mr? thanks.
Why no sound? it will be great if we hear it too
Awesome, dear sir, what are specs of your computer I 'm using Ryzen 7 2700, does it to good for thermal - dynamics analysis.
Can you have the link for us to download the file
can i do the same on catia?
solver abnormally terminated solidworks no se por q me sale este error
did you fix that ?
Where can i get all 2D drawings of this Assembly ?
Maybe Gosho Aoyama-Sama has some?
Cuantas piezas tiene?
running the sim goes to mach speed. Is there any remedy
its running perfectly fine but the second run goes like 'check your geometry'
thank bro
Can I get the rotor? from 1:22:49
whats the name of this song ?
1:32:44 where can I get this?
very good
I'm a German student who isn't interested in becoming an engineer but I have worked with solidworks before and really liked it. Now I would like to use it privately which leads to my question: Is there a way to get a free version that doesn't expire after year?
There are open source CAD softwares. Look for them.
of course there is ways to get it free but those ways are illegal
Pretty cool how their Solidworks version isn't a buggy pile of garbage. Mine won't even run the simplest load analysis without crashing (High end machine with Xeon processor, 64GB RAM, and Nvidia P4000)
can you send me this part document. I want to try this airfane? Thank you. best regardsly.
enginadil@gmail.com
GOSTEI DEMAIS,...!!!!
Will you give this solidworks file
👏
good
give me your first music name pls !
good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol
2:14:20 song?
nice 1
34:30 try Shell feature next time
When I tried to do the simulation, he told me that geometry error ... Why? :(
Check rotating region part. I myself experienced the same error and I solved it by adjusting that part's feature. If it is not the case, you may check the other parts as well to see if there is any interference among the parts.
Ok thanks!
You must do run when motion study page is opened