Seemed like a heck of a lot of sizes of drill bits to make all those holes! I got like 5 sizes that's about it.. using normal drill would kind of mess up the look for me when you get to the bottom and to buy a full set of bits would kind of defeat the object for me as a DIYer with OCD lol 😅🤦🏻 Came out nice though mate I need to make something like this now actually.. weird this came up! 👍
Thank you for the video...We usually need this tools for car repairing and they may fail down when loading or working. I suggest you to make a top and it would be a case..
Piece of wood, some wood screws & small size (air/petrol/breaking fluid)hose that fits inside the socket. Cut a piece of hose that just fits inside of the socket, screw it to the board/wood. Write the size on the hose.
It seems that it would be simpler to use a mortising chisel/twist drill the size of the socket drive and have square pins sticking up. Easier to finish and no depressions to collect dust...
I think a person is better off using pegs to arrange sockets on a wall. It gives you options to stack multiples of each size per peg: 6 point socket, 12 pt, impact, doubles,....
Why not make a case so it closes. In case they fall. Also instead of penciling the center, you can spray paint washable paint from top and then you’ll have perfect setup
great job ,but....to do this work I need 21 different units of measure, 21 fittings I think they can do that who has 21 units statistically possessing 21 units are 3 out of 20 the video done well. well the system, bad thinking we can do it all
when you buy sockets, they already come organized, and believe me, much better than this !!! ...but if you for some reason have to make your own socket organizer - this in not the way to do it !!
This is actually a pretty good way to do it lol. Some of us have over 300 sockets like myself and it's much easier to make a giant tray organizer like this one to keep track of them
How? How else would you know the size of the socket. It takes way too much to pick up each socket and look for the number. Might as well just throw all your sockets in a bucket
Muy buena idea, fácil y simple pero muy útil. Muchas gracias por compartir tus conocimientos... Saludos desde argentina
Seemed like a heck of a lot of sizes of drill bits to make all those holes! I got like 5 sizes that's about it.. using normal drill would kind of mess up the look for me when you get to the bottom and to buy a full set of bits would kind of defeat the object for me as a DIYer with OCD lol 😅🤦🏻
Came out nice though mate I need to make something like this now actually.. weird this came up! 👍
Thank you for the video...We usually need this tools for car repairing and they may fail down when loading or working. I suggest you to make a top and it would be a case..
Great solution. I've been wanting to make some trays for my socket sets and this is a perfect design. Thanks!
Use this with your drill bits as well
Ben fatto. Ottimo spunto per altri attrezzi
Piece of wood, some wood screws & small size (air/petrol/breaking fluid)hose that fits inside the socket.
Cut a piece of hose that just fits inside of the socket, screw it to the board/wood. Write the size on the hose.
Informe
Cool, now use an endmill to mill out a 3/8ths pocket at the base of each socket hole and epoxy in some magnets in place.
Que bonito organizador me encantó.
Me gusta la creatividad
That's pretty darn nice. Good job man.
Great, simple and cost effective solution! I love it!
How many bits did you use to drill the holes. Which did you start with and which did you end with
Probably just need to get the Harbor Freight forstner bit set and compare them to the sockets.
Show
Vou fazer um igual
Obrigado
Next video: How to organize Forstner Bits. 😂
It seems that it would be simpler to use a mortising chisel/twist drill the size of the socket drive and have square pins sticking up. Easier to finish and no depressions to collect dust...
I think a person is better off using pegs to arrange sockets on a wall. It gives you options to stack multiples of each size per peg: 6 point socket, 12 pt, impact, doubles,....
great work love the beats
Thanks for the support!
You could glue some magnets on the bottom of where the sockets go to
bgraiders323 6
Unless it's aluminum
perfect
aluminum sockets.. really...
don't encourage him ,,
the watching of router bit come to complete stop was just mesmerizing..
or was it the watching of stain dry ...hard to decide.
I just buy socket organizers strips sockets clip on about $2 a strip fits 15-20 sockets per strip
Just saying
✌👉 😎
puoi darmi il link per acquistarli?
Jusy need a forstner bit for each size socket. lol
Damn, Stevie Wonder could read that tape measure!
I would have preferred some narration.
Man drills holes in wood
I don't have the time, tools or patience to do this, what's plan B?
Larry Woodruff........Plan B. Just go to Harbor Freight & buy one pretty similar. That’s what I would do instead of spending half a day making one.
nice, i would have used metal stamps to mark the sizes tho
I made one very similar... nice video!
According to Shazam the music is: Hassam Feat. Güevardo, Lecciones De Amor. Album: Humor Bacon Colombiano Vol. 3. Released: 2016
Awesome job! Thumbs up!
Nice Job, great video.
👍 for the project, 👎 for the music
Whats the liquid you use in the end ?
Varnish
Why not make a case so it closes. In case they fall. Also instead of penciling the center, you can spray paint washable paint from top and then you’ll have perfect setup
Yea I also thought about the paint one
Spend half a day making one or just go to Harbor Freight & buy one for just a few bucks.
The music sounds kind of .....Link Wray.......type music......pretty cool.
South American k
great job ,but....to do this work I need 21 different units of measure, 21 fittings
I think they can do that who has 21 units
statistically possessing 21 units are 3 out of 20
the video done well. well the system, bad thinking we can do it all
andrea giambrone you’re a moron. He did it and showed you how he did it. I bet he couldn’t give two shits about you and if you can do it.
nice work
Music has to go....
Great skill needed to do this project.
Awesome! What's the music?
ua-cam.com/video/qitGdmxyX9w/v-deo.html
Watching someone drill holes for 3 minutes, how interesting.
i sped it up to 2 X
Não q tá cortando com o cerra copo os tamanhos são tudo igual,dpois aparece cada um do tamanho certin dos soquetes
بسیار زیباست
WARNING NO NARRATION!
You lost me with the goofy music!...sorry
👍👍👍👍👍💐💐💐💐💐💐💐💐💐
How do I get on one hand the number .okm be Tmnha..arju respond if possible ... from Iraq ..
Excelente
Dude has to much time on his hand but it is a good idea
Maybe you should spend less time watching UA-cam and get some English lessons .Hes a young kid I think it's awesome "Dude" stop hating bully
Just dont turn it upside or drop it 😉
brandon can you share the background music title? thanks
nvm. found it. Far The Days Come - Letter Box . letting it here just in case someone tries to find it too.
Whats the name of the music artist?
Anyone know the name of this song?
Чтобы это зделат купил целый комплект сверла.?
The Numbers dude,You could have done a nicer job writing on it.Video and music nice job.
when you buy sockets, they already come organized, and believe me, much better than this !!!
...but if you for some reason have to make your own socket organizer - this in not the way to do it !!
This is actually a pretty good way to do it lol. Some of us have over 300 sockets like myself and it's much easier to make a giant tray organizer like this one to keep track of them
music sounds like something from a 70's porno flick...lol
What happens if you accidentally knock it off the bench?
Tom Leone you get to spend the next 3 minutes picking up all your sockets. Was that a trick question?
thats why i found it silly! i thought it was something to carry around, This BS you have to have on one place and thats it
You're fecked!
Kjj
What is that sound O.o
jajajajja
Un poco cutre
Ok
Бесполезное видео . Чтоб сделать коробку под головки . Нужно купить комплект фрез . бред.
I will gave 4 over 10 mark not passed
Ruined it with the Numbers ob the Wood
How? How else would you know the size of the socket. It takes way too much to pick up each socket and look for the number. Might as well just throw all your sockets in a bucket
Godawful music - thumbs down.
Music annoying, damn you😡
Muy malo el vídeo y muy malo el organizador
too much fx on a guitar can make you feel sea sick 🤒 🤣🤣🤣🙄❤️