So would you have to cut a quarter inch off the parts you don’t bend for them to be the same width as the bent pieces? Assuming you have a 1/8th inch kerf.
Brilliant. How wide was this piece, originally? Can you provide the product number, I'd like to order this style from your website, but cannot find it.
I definitely needed this. I have several windows I want to put casing around and an arched doorway. How thin of a sliver did you remove? Looks abut the thickness of the saw blade?
@dlittleberry This molding is made from Polyurethane, which is a hard-condensed foam (not like Styrofoam). Different materials will result in varying results. You can get a sample of a polyurethane molding to find out what it is exactly. Check out the website.
A year later... Sounds like he said "out of two pieces" because you'd cut one stick to get the 2 outer sides, then move saw to cut the second piece of moulding for the middle section.
when you run the piece through a table saw twice you lose 1/4" of width compared to a piece that is not ripped. if no rosette is used, how do you properly transition the miters of the two pieces that are now different widths and profiles?
You have to use 2 pieces of molding. If you are doing 3 parts, the center section will come from 1 piece and the top and bottom piece will come from the 2nd piece. Here is another video that explains how this is done (Go to around 3:50 in the video): ua-cam.com/video/YvXj8j1y_UY/v-deo.html
Thanks! I didn't want to make arched trim out of veneered-ply, and this allows me to get the effect that I wanted, without so much waste (and time!).
can this trim be placed on an exterior wall?
So would you have to cut a quarter inch off the parts you don’t bend for them to be the same width as the bent pieces? Assuming you have a 1/8th inch kerf.
This was my first thought also. Pity in 2 years it's never been addressed.
Thanks, this solves a problem I had turning a closet into a recessed entertainment center. Much obliged!
Brilliant. How wide was this piece, originally? Can you provide the product number, I'd like to order this style from your website, but cannot find it.
My brain just exploded!!🤯
Hello does this works with pvc trim also?
I definitely needed this. I have several windows I want to put casing around and an arched doorway. How thin of a sliver did you remove? Looks abut the thickness of the saw blade?
@dlittleberry This molding is made from Polyurethane, which is a hard-condensed foam (not like Styrofoam). Different materials will result in varying results. You can get a sample of a polyurethane molding to find out what it is exactly. Check out the website.
Where do you buy
Won’t the cut pieces not match up perfectly to the non cut piece bc you aren’t accounting for the blade taking 1/16-1/8” out during the cut?
A year later... Sounds like he said "out of two pieces" because you'd cut one stick to get the 2 outer sides, then move saw to cut the second piece of moulding for the middle section.
Yes, that’s why he said to use two pieces…
•You’d rip the top section and the bottom section out of one piece and the middle out of the other piece
Hi...
Where can I get this material in hyderabad india🇮🇳.
Please help me out.
We don't have it at all in India. For me It's been a year now but couldn't find one till now.
Hi is this timber or some type of plastic
I always wondered how they did this.
when you run the piece through a table saw twice you lose 1/4" of width compared to a piece that is not ripped. if no rosette is used, how do you properly transition the miters of the two pieces that are now different widths and profiles?
You have to use 2 pieces of molding. If you are doing 3 parts, the center section will come from 1 piece and the top and bottom piece will come from the 2nd piece. Here is another video that explains how this is done (Go to around 3:50 in the video):
ua-cam.com/video/YvXj8j1y_UY/v-deo.html
Freaking genius!!! Thanks for posting. 👍🏻
Where did you purchase the trim?
did you rip that yourself on a tablesaw or was it bought in like that ready cut
Does this trick work with Polystyrene moulding as well?
Cost or variety.
@palmer3977 We used a table saw.
You're a lifesaver!
Thank you. That was a lot of help. Great video.
Whats the molding made of ?
He said, polyurethane. There is another comment on this material.
Thanks for the info. I would’ve never thought about . I’ll stick to my day job.
AMAZING!!!! I would've never thought, THANK YOU SO MUCH!!!!
Hvala puno
Why not just buy custom flex molding? one part...
Super smart👍🏻
Very good product
Awesome! thanks for the info.
Very helpful!
Genius!
Asome!!!!
only way? well mathias wandel has a video where he made it out of wood with a curve
I hope you're not asking money for this.
Polyurethane.
Smart.