thank you :) i know that it seems expensive at the first view. but please think about again: you ca build a loot high quality boards out of it! usually a good boards costs 20-30€ (or even more). that's the money worth after making your third board ;)
does the new beginner kit have the outline inside the mold (not something I would want)? i bought a custom shape mold about two years ago and wanted to try a new configuration since I didn't like the one i configured then :)
good question. This is a standard mold kit which is made for creating "classic boards" ... but we have custom mold kits too. you ca design them with our online configurator --> Visit the website www.fingerboard-molds.com for all the infos
The problem with plastic molds like this is that after making multiple boards and drilling the truck holes, the drill bit distorts the hole and they become inaccurate. I only use metal molds these days. No more issues :)
thank you :) visit our website: www.fingerboard-molds.com and go to the webshop. we ship worldwide and we accept credit card and paypal. Currency changes automatically at the end of the checkout)
i recommend to let it cure for 24hours. Once you are familiar with the process and the right amount of glue, you could decrease that down to 12hours or less. But please get used to the process first and see some good results before yo decrease curing time :) Cheers
Hi, should be in your hands in 7-10 business days. In some cases faster. But in actual situation with covid19 it could be a bit slower... depends on shipping capacities of our and your national shipping company. If you have any other questions, you can send us a message to info@fingerboard-molds.com Cheers Dennis
Hi, a custom mold needs usually 2-3 days. (Sometimes up to 4-5 days). Shipping depends on were you live on the planet :) within Europe 5-10 days for example
Usually its 10-15 days to the US, but with actual Covid19 situation it could be longer in some cases. But it got better recently. So I guess it gets back to the normal shipping times. Hope that helps :)
Hi, this depends on how hard you are using the shaper. The best way is to use the shaper for drawing the outline and then cut pretty close to the line. so at the end you are sanding just the last mm when the board is in the shaper. :) Some customers use the shaper for 100 of boards... and they can be ordered afterwards at any time (in case it gets damaged over time) Cheers Dennis
Hi Alejandro, this depends on the amount of glue you use. If you are new to board making, then you probably using a bit too much glue, so i recommend to let the boards dry overnight for your first couple boards. Write me a message over our website www.fingeboard-molds.com if you have more detailed questions. then we could talk.... :)
Hey i love u guys and im a big fan but I have one question, I saw that on your guy’s site there was no out line on the mold so is it something u changed or I can’t see it .
Hi, that is correct. the outline has been deleted on the newest version of all of our Molds and there is a good reason for. EVERY kit comes now with a Shaper. And you can draw the outline much better with this shaper. AND the best, since the mold has no outline any more, you can use that mold with a loooot of different shapers. We have now a bunch of new shapers like boxy or old school or different widths. So overall it a very good thing that the outline has been deleted. :) If you have any other question you could always send us an email: info@createyourskate.com Hope this helps. Cheers Dennis
Sure you can do this. Visit www.createyourskate.com and choose the veneer you want. You can choose from standard, colored and special wood. If you have any questions, write us an email at info@createyourskate.com or info@fingerboard-molds.com :)
@@CreateYourSkate at 6:23 it seems like there in a small line already on the board is there any way for that not to be there so you can make custom shape and sizes?
@@ethan._buii this line has been removed a year ago to give the opportunity to make differentiation board shapes. We have also different shapers styles in the shop which matches the BeginnerMold :)
depends on the actual shipping situation regarding Covid19. But usually it should take 7-12 business days. If you have any other question, feel free to write us an email: info@fingerboard-molds.com
our example is just a normal paper (80gr/m²). Because this is the easiest way for EVERYONE to create by graphics by themselves. and the result is really awesome :)
Cory Moncus what exactly do you want to know? You can design the custom mold on the website by using the mold configurator. Then buy the custom mold in the shop and send us your mold configuration as screenshot via email. We produce your mold according to your design! Write us an email if you need more information: info@fingerboard-molds.com
Go to www.fingerboard-molds.com to see the prices. International shipping is 9,95€. Google will help you with the correct exchange rate. You can pay via paypal and credit card.
actually its standard printing paper, which works great. The good point is that everybody can do this by themselves.... just print out your own logos or graphics at home and make your unique boards. But we are working on something else regarding graphics....
another thing is, that a to of people want to make several boards the same time. So they purchase 3 or 4 molds. With that system they can use it "everywhere" and without buying 4 vices :)
Hi Markus, you could also make a 34mm by 96 mm board by ordering an additional shaper for your mold: www.createyourskate.com . You could also design your complete own board in every measurement by using our 3D-Configurator: www.fingerboard-molds-configurator.com . Let me know if you need any help. you can send me an email: dennis@createyourskate.com
Roniel Pantanosas yes, we ship worldwide. Visit our webshop: www.fingerboard-molds.com . Your currency will be shown during checkout. You can pay via paypal and credit card ;)
Hallo, habe dieses Kit Grade erst auf eBay bestellt. Habe nur eine Frage zum Imbus. Welche Größe hat dieser. Bzw beide Werkzeuge. Habe auf der Website nichts dazu gefunden.
Hallo, Danke für den Hinweis. Diese Information muss ich auf der Website ergänzen :) Es handelt sich um einen 5mm Innensechskant sowie einen 10mm Gabelschlüssel. Diese kannst du entweder in jeden Baumarkt, oder bei uns im Shop im "Tool-Kit" kaufen. Viele Grüße Dennis
I´m so sorry that it came not before christmas. Shipping is hard for the shipping companies on christmas and new years time. So i hope for your understanding. Did you check the tracking we've provided to you? Please send us an email about this, so we can check the tracking by ourselves and let you know what to do. Cheers Dennis
it is the standard mold. the custom mold is the same in use, but you can define every measurement by your own with our online configuration tool on the website. www.fingerboard-molds.com
Tijn Debusschere thats technical possible, but not the best solution since your shape will not be the best. Better is to use some fast glue (like tidebond or similar) to make more boards in less time. :)
Matouš Jursa standard mold make 32mm boards. But we sell custom molds according to your measurements too. We have a custom mold configurator on our website. You can choose from a lot of measurements :) Visit our website www.fingerboard-molds.com for more infos :)
yes the standard mold has a 32mm width shape. If you want to make your own shape, you can order a custom mold. Visit our website to try the Configurator. ja, die standard Presse hat 32mm Breite. Wenn du dein eigenes Board designen willst, kannst du bei uns auch Custom-Pressen bestellen. den Configurator findest du auf der Webseite.
i don't know how to use paper to make a ramp. But i can tell you how to make a ramp out of concrete in a very easy way: www.fingerboard-molds.com/instructions/how-to-build-a-concrete-ramp/
Fingerboard-Molds I really need a mold but i use two tech decks but it doesn’t work and I don’t have money so I was wondering if I could review your mold
key dont put the same music on repeat
thank you for your advise! I will really keep that in mind by producing our next video! thank you :)
that is what i thought
@@dickfuck15 lmao
Andrew Olivares honestly
You must be really happy keep doing this good job
:)
=D
i enjoyed listening to this overly repetitive music!
you got hacked me too!
Nothing like listening to iMovie music for 20 minuets!
Hi
you got hacked me to
you got hacked boi
What a cool product. I swear, if it was a bit more affordable I'd immediately buy one.
thank you :) i know that it seems expensive at the first view. but please think about again: you ca build a loot high quality boards out of it! usually a good boards costs 20-30€ (or even more). that's the money worth after making your third board ;)
Fingerboard-Molds I ca make a wot of bowds wit di?
Fingerboard-Molds ho Wong dis wast
@@guadsucks4872 wtf is wrong with ur spelling my nigga
@@Andres-mx2po its called german you fucktard
SAME MUSIC EVERTIME :( :( :( :(
GamerPeterDK yah it's depressing
what
GamerPeterDK doesnt matter ㅗ
DONALD DUMP ERES TU
Bought one cant wait!
Ok
Did you like it?
Purchase one, it works really good
(It also works good as a ledge)
thank you for the kind words :)
we have molds for ledges too. so you don't have to use your fingerboard-mold for that :D
ARGENTINAAAAAAA❤PRESENTEEE
Seee
x22222222
Uri julian siiip como no?
Como mierda hago para conseguir uno de esos acá, país garcha q no tiene nada
Cheto
It looks very cool i bought it, waiting for it to ship😁
good choice :)
props to dennis working hard on these replies
Hey Ben, thank you 😉
Do the truck holes for BlackRivers? If so, I will definitely purchase one.
yes, the boards made with our mold works 100% with Blackriver trucks :)
Or u can drill the holes ur self
Great video! I’m going to buy it this week!
What size drill bit do you need to drill the holes? Great video
thank you for the nice words. the best is to use a 1,5 or 1,6 mm drill bit :)
1/16
Wow I really enjoyed watching this video!
thank you!
That deck would look so good with some gold baseplate brts and some green flatface wheels
BUSHINGS U.S.A. Why am i salvating?
Its a finger board not a tech deck
aethan king stfu
Infelizmente no Brasil não tem disponível para compra, quero muito um desse 😔
Você pode comprá-lo em nosso site. Enviamos internacionalmente, incluindo número de rastreamento: www.fingerboard-molds.com
I just ordered one mold and i cant wait to get it😅😀😀😃
awesome! you will love it!
Yeah i Think so
Im so excited and happy😅
I Will Make a video review with the mold when i get it
How did you cut out the board?
very inspiring, print and best way, i really like ... i am from indonesia
Can you guys make a handbord mold? Been looking for a quality one for a while now and thisblooks amazing! Would love to chat!
hi, please throw us a message via email to info@fingerboard-molds.com :)
What drill bits i need? plz respond cause I'm buying it!
you can use a 1,6 mm or 1,5 mm drill bit :)
Fingerboard-Molds and also what is the name of the drill bit that opens the top of the hole
TJ Esseilyyou can use a standard drill bit like 4 or 5 mm or the best way is to use a countersink:)
its so espensive! ill just stick to my paper fingerboard glued together with a glue stick clamped between two tech decks lmao
It ain’t expensive
Its very expensive my berlin wood is 150$
@@marius2129 I'm talking about the mold. It's like $70.
Oh ok
Marcus Tran
Thats exspensive fir some pepole but you can make a mold at home
Can you press multiple decks at a time
and one more question... the deck.... in standart kit is it low or high? sorry for my bad english
hugo hauskrecht in my experience, it was low
we have a detailed data-sheet for the standard mold on our website: www.fingerboard-molds.com :)
yes you can use u.s dollars i bought it and got it today the mold looks amazing so professionally made 3d printed i think
Where Did you get the mold ?
@@iamking9778 we sell them in our webshop: www.fingerboard-molds.com :)
thank you for the good words :)
Where did you buy the tools
these are simple tool which you ca buy in every tool shop or in the web (like AMAZON)
Fingerboard-Molds what is the name
@@CreateYourSkate I'm From Russia. I'm can't buy this (((((((((((((
@@milfhunter980 of course you can! we have a webshop and we ship WORLDWIDE :)
does the new beginner kit have the outline inside the mold (not something I would want)? i bought a custom shape mold about two years ago and wanted to try a new configuration since I didn't like the one i configured then :)
Mine doesn’t have it
I got the bigger set tho w the extra tools n wood
Clear coat is that they samen like hair spray
what clear coat do you use?
i use standard clear coat for wood. but you can use quite every clear coat out there.... :)
Hi make this longboard,cuiser etc
good question. This is a standard mold kit which is made for creating "classic boards" ... but we have custom mold kits too. you ca design them with our online configurator --> Visit the website www.fingerboard-molds.com for all the infos
How long do you wait once the graphic is applied with glue? 12:33
I will buy one this week
great to hear :)
Could you use a router to cut the board with the shaper? Just using one side of the shaper to hold the board down?
Awesome
The problem with plastic molds like this is that after making multiple boards and drilling the truck holes, the drill bit distorts the hole and they become inaccurate. I only use metal molds these days. No more issues :)
Which size are those I really like them
NSV Skate visit our website for all the informations www.fingerboard-molds.com :)
Fingerboard-Molds ok
I love it 👏🏻,⁉️but where to buy it from
thank you :) visit our website: www.fingerboard-molds.com and go to the webshop. we ship worldwide and we accept credit card and paypal. Currency changes automatically at the end of the checkout)
how long should I keep it in the mold?
i recommend to let it cure for 24hours. Once you are familiar with the process and the right amount of glue, you could decrease that down to 12hours or less. But please get used to the process first and see some good results before yo decrease curing time :) Cheers
How many days does it take to ship to Denmark 🇩🇰 😀
Edit: i Got it
Hi, should be in your hands in 7-10 business days. In some cases faster. But in actual situation with covid19 it could be a bit slower... depends on shipping capacities of our and your national shipping company.
If you have any other questions, you can send us a message to info@fingerboard-molds.com
Cheers
Dennis
Ok thanks
Do you have the mesuring angles for mold?
visit our website www.fingerboard-molds.com to see prices and a lot of informations.
What is that bit called you use to countersink?
What grip is that...the one included
yes :)
Hope Fb its regular foam grip
Fingerboard-Molds ........what?
?
its our "own" griptape which is usually used in the automotive industry. Its included in every veneer kit and of course in the mold-kits :)
Do you get trucks and wheels when you by it from etsy?
Hola, hacen envíos internacionales por DHL?? saludos
Hola,
sí, usamos DHL con seguimiento para todos nuestros paquetes :) visite www.fingerboard-molds.com si quiere hacer un pedido :)
Les estoy mandando un mensaje a su pagina, espero me puedan ayudar :)
If you are ordering a custom, how long does creating and shipping take?
Hi, a custom mold needs usually 2-3 days. (Sometimes up to 4-5 days). Shipping depends on were you live on the planet :) within Europe 5-10 days for example
@@CreateYourSkate so what if you are somewhere in america
how long is the shipping rate?
Usually its 10-15 days to the US, but with actual Covid19 situation it could be longer in some cases. But it got better recently. So I guess it gets back to the normal shipping times. Hope that helps :)
@@CreateYourSkate Thanks a lot! 👌
Awsome video!! I have subscribed! Dont let haters get to you as they got to me lol!
when sanding the sides of the deck, does the deck holder/shaper get messed up???
Hi, this depends on how hard you are using the shaper. The best way is to use the shaper for drawing the outline and then cut pretty close to the line. so at the end you are sanding just the last mm when the board is in the shaper. :) Some customers use the shaper for 100 of boards... and they can be ordered afterwards at any time (in case it gets damaged over time)
Cheers
Dennis
how long is the drying time?
Hi Alejandro, this depends on the amount of glue you use. If you are new to board making, then you probably using a bit too much glue, so i recommend to let the boards dry overnight for your first couple boards. Write me a message over our website www.fingeboard-molds.com if you have more detailed questions. then we could talk.... :)
Interesting.
:)
I need one
:)
I love the graphic!!! Where can I found it?
Its included in every mold kit as an example :)
Can you tell me where to buy your board
we sell the molds :) visit www.fingerboard-molds.com for more infos, instructions and the webshop :)
I’m thinking about buying this but can’t the wooden sheets be found at local hardware stores?
You find wooden sheets (veneer) online or on our website. Ours are proven to be the best for building fingerboards :) www.CreateYourSkate.com
Hey i love u guys and im a big fan but I have one question, I saw that on your guy’s site there was no out line on the mold so is it something u changed or I can’t see it .
Hi, that is correct. the outline has been deleted on the newest version of all of our Molds and there is a good reason for. EVERY kit comes now with a Shaper. And you can draw the outline much better with this shaper. AND the best, since the mold has no outline any more, you can use that mold with a loooot of different shapers. We have now a bunch of new shapers like boxy or old school or different widths.
So overall it a very good thing that the outline has been deleted. :)
If you have any other question you could always send us an email: info@createyourskate.com
Hope this helps.
Cheers Dennis
Good job!
can we buy wood sheets to make fingerboards in store in larger quantities
Sure you can do this.
Visit www.createyourskate.com and choose the veneer you want. You can choose from standard, colored and special wood. If you have any questions, write us an email at info@createyourskate.com or info@fingerboard-molds.com :)
I would like to buy one of your molds but they are too expensive
adorei o video tmj !!!!!!!!
do you need to countersink on the back side???
Usually you don’t need a countersink on the backside. Just sanding is enough. But if you prefer you can add that :)
@@CreateYourSkate at 6:23 it seems like there in a small line already on the board is there any way for that not to be there so you can make custom shape and sizes?
@@ethan._buii this line has been removed a year ago to give the opportunity to make differentiation board shapes. We have also different shapers styles in the shop which matches the BeginnerMold :)
Did you cut it out with the saw in the video or not
Are you gonna answer
??
This damn song pissed me off
understand! I will keep that in mind for our next video :)
You need to use an electric driller or you can use manual drilling tool?
you can use a manual drilling tool as well. In fact we are selling such a hand drilling tool on our website: www.createyourskate.com
Thank you very much for the answer i don't know if you saw but i ordered a mold and im waiting for it to ship😁
How long does it take to ship to california
depends on the actual shipping situation regarding Covid19. But usually it should take 7-12 business days. If you have any other question, feel free to write us an email: info@fingerboard-molds.com
Thanks
Shipping in italy?
yes of course... we ship worldwide!!! :) www.fingerboard-molds.com
Is the graphics a special material or just paper with special clearcoat
our example is just a normal paper (80gr/m²). Because this is the easiest way for EVERYONE to create by graphics by themselves. and the result is really awesome :)
Can you explain the custom molds of your site?
Cory Moncus what exactly do you want to know? You can design the custom mold on the website by using the mold configurator. Then buy the custom mold in the shop and send us your mold configuration as screenshot via email. We produce your mold according to your design!
Write us an email if you need more information: info@fingerboard-molds.com
Does it have a deliver fee???and how much is the mold and the delivering fee here in the philippines?
Go to www.fingerboard-molds.com to see the prices. International shipping is 9,95€. Google will help you with the correct exchange rate. You can pay via paypal and credit card.
Wow
can i use a vice instead of nuts and bolts?
if u use not to much pressure, than this is fine. what is your idea behind the vice instead of the screws (which work awesome)? :)
il buy it like a present for chrismas, if my parents will agree. But, i showed it to them, and they sad that it is OK, they will think
:)
What paper is ur graphic on? standard printing paper or another sort of "special" paper?
actually its standard printing paper, which works great. The good point is that everybody can do this by themselves.... just print out your own logos or graphics at home and make your unique boards.
But we are working on something else regarding graphics....
Thanks heaps!
Why don’t you just put it into a vice or tight clamps? So much more easier
WILD FB well some people don’t have that stuff, and the bolts for tightening are more compact and you can put it away in a small area
exactly! :) well explained!
another thing is, that a to of people want to make several boards the same time. So they purchase 3 or 4 molds. With that system they can use it "everywhere" and without buying 4 vices :)
what's the deck size I really wanna make one but I ride 34mm by 96 mm
Hi Markus, you could also make a 34mm by 96 mm board by ordering an additional shaper for your mold: www.createyourskate.com . You could also design your complete own board in every measurement by using our 3D-Configurator: www.fingerboard-molds-configurator.com . Let me know if you need any help. you can send me an email: dennis@createyourskate.com
lol i movie edited video,bot throwing shade,cool video!
:) i was a video noob at this time. imovie was my first choice...maybe not the best :D
can you ship to the Philippines? Thanks! btw, nice video.
Roniel Pantanosas yes, we ship worldwide. Visit our webshop: www.fingerboard-molds.com .
Your currency will be shown during checkout. You can pay via paypal and credit card ;)
thank you and I will buy one
@@CreateYourSkate
@@jtlproductions7114 :)
oye yo soy de Colombia y me gustaría comprar todo el sed como se llama
Hi i am about to by one of these sick molds. Where do you ship from?
Hi, we are shipping from germany. Visit the website for ordering and for more informations: www.fingerboard-molds.com
@@CreateYourSkate thats Perfect i live rigth next to Germany, in Denmark.
Hallo, habe dieses Kit Grade erst auf eBay bestellt. Habe nur eine Frage zum Imbus. Welche Größe hat dieser. Bzw beide Werkzeuge. Habe auf der Website nichts dazu gefunden.
Hallo,
Danke für den Hinweis. Diese Information muss ich auf der Website ergänzen :) Es handelt sich um einen 5mm Innensechskant sowie einen 10mm Gabelschlüssel. Diese kannst du entweder in jeden Baumarkt, oder bei uns im Shop im "Tool-Kit" kaufen.
Viele Grüße
Dennis
Hey mine was supposed to come before Christmas but when we track it it ain’t there
boy its me diego r mine came today I was so hyped
I´m so sorry that it came not before christmas. Shipping is hard for the shipping companies on christmas and new years time. So i hope for your understanding. Did you check the tracking we've provided to you?
Please send us an email about this, so we can check the tracking by ourselves and let you know what to do.
Cheers
Dennis
Randomizer how long did it take
Was the one in the video the standard mold or the custom??
it is the standard mold. the custom mold is the same in use, but you can define every measurement by your own with our online configuration tool on the website. www.fingerboard-molds.com
Where abouts are you guys located?
We are located in Germany and we ship the whole world :)
@@CreateYourSkate thank you
I had a question about my mold, I ordered it in September and it still hasn't arrived, should I be worried?
Hi, of course you should be worried! Please write us an email to info@fingerboard-molds.com and we will answer you via email!
Dude i think im going to buy one of these molds because they give free wood glue free foam grip and free vaneer and not just the mold
:) exactly :)
yo ya hise mi fingerboard me falta sus tracks
Can i make two decks in one time
Tijn Debusschere thats technical possible, but not the best solution since your shape will not be the best. Better is to use some fast glue (like tidebond or similar) to make more boards in less time. :)
ok thanks :)
What size bit for countersink?
we recommend to use a 3mm drill bit for the countersinks. we also sell a really good drilling tool with bits on the website www.createyourskate.com :)
@@CreateYourSkate you guys rock! I just got a beginner kit and Its awesome. I’ll check the drills out!
@@yogz90 thank you so much for the nice words :) have fun!
(español) Si no fuera por la música no me ubiera visto el vídeo completo ha y si me yamo la atención el video
:)
nice broo
Do you make handboard molds?
KatoPotato900 please write an email to info@fingerboard-molds.com
what is the size of your drill bit?
its a 1,5 mm drill bit (metric-drill-bit). If you are in the USA its maybe a 1,6mm (inch-drill-bit). Both work fine :)
This mold make 29 or 32 mm deck?
Matouš Jursa standard mold make 32mm boards. But we sell custom molds according to your measurements too. We have a custom mold configurator on our website. You can choose from a lot of measurements :)
Visit our website www.fingerboard-molds.com for more infos :)
i just want to ask... is the standart edition 32mm deck? sorry for my bad english
yes the standard mold has a 32mm width shape. If you want to make your own shape, you can order a custom mold. Visit our website to try the Configurator.
ja, die standard Presse hat 32mm Breite. Wenn du dein eigenes Board designen willst, kannst du bei uns auch Custom-Pressen bestellen. den Configurator findest du auf der Webseite.
thanks :)
Adonde comprais de esos
Thanks bro
where can I find the veneer and what type?
you will find everything o our website: www.createyourskate.com :)
How to make a
Ramp out of paper for a fingerboard
i don't know how to use paper to make a ramp. But i can tell you how to make a ramp out of concrete in a very easy way: www.fingerboard-molds.com/instructions/how-to-build-a-concrete-ramp/
What’s the tool u used to cut the board
its a fretsaw, but you can use any wood cutting tool like a jigsaw or sth. :) its really easy
Fingerboard-Molds I really need a mold but i use two tech decks but it doesn’t work and I don’t have money so I was wondering if I could review your mold
2K Legend or you could use sandpaper. It would take a bit longer tho
I like fingarbord
How to order
Ash David Vlog its easy: visit our webshop: www.fingerboard-molds.com
We ship worldwide, including tracking
Thanks fore you
Do you ship to Canada
of course! we ship worldwide :) www.fingerboard-molds.com