Want to sound like this? Here’s what you’ll need! (Affiliate links for which I may be compensated) 1320 B-Series Twister Headers: ebay.us/VxLjne Magnaflow 2.25" Cat: amzn.to/3nktkAl Vibrant 1140 2.25" Ultra Quiet Resonator: amzn.to/38PKgef
@@TheUnhappyEmo1 well they must have sold out quickly because there are none at all on the 1320 website. EDIT: I check eBay and wow there are much more than before like you said. They also aren't overpriced anymore! Might pick one up!
Its so funny 95% of Subaru lovers always say "I miss that Subaru boxer burble" "You can hear the boxer rumble from a mile off and you know it's an impreza". When thats complete nonsense!. That burble/rumble has nothing to do with the boxer engine. it's the Unequal Length Exhausr headers being pushed through a single back pipe that causes the "Subaru Burble". You could modify your 2021 Civic bottom of the range with plastic interior to sound like a vicious "boxer" burble if you install a set of proper UEL headers. People always saying "That boxer rumble". none of them seem to notice that after about 2007, the "boxer rumble" is gone... funny that isn't it? but... all imprezas, even 2021 STi S209's and White edition STi's are still using that same late 1980's horizonatally opposed Flat 4 2 litre Turbo Charged EJ20 engine, but how come now when you accelerate like an animal even in the 310+ horsepower limited edition machines, they sound the same as if you were accelerating in 1993 Toyota carina E 1.6litre standard edition, or anything similar? The engines is identical in every way to the older ones bar some upgrades... did they hide the "Boxer" rumble? Nope. It never existed lol. It's an exhause sound. From exhausts being fired out of at different times to eachother.. like this one here... causin... "boxer" rumble hehe hopefully thats all cleared up with every Subaru owner on earth/ cheers!!!
It sure does! The owner said It comes with slip fits to delete the cat and should mate up. This one needed a bit of tweaking because it has RT4WD so the driveshaft is in the way a smidge
Cool video man. I’ve waited forever for a video like this. Does the header clear the stock radiator or would I have to get a smaller radiator to make header fit?
@@snowfox7739 in comparison to American v8's like the srt8, or the mustang (5.0) GT, Noooo, sounds nothing like those, not even a lil bit, but you will find some Mercedes Benz's that sound somewhat similar at higher rpms...as you mentioned, you'll never find any 4 bangers that actually sound like this unless they're also running uel's, and to non-car folks who are not really hip to all bolt ons, many of them will easily mistake this CRV for having some type of v8..if you were to thrown a 4 inch racing muffler on this crv tho, it would be much more convincing since it'll have a deeper tone...
@@bstruck7446 Just a heads up the header came into stock yesterday! I already got my order placed and hopefully soon i'll be able to hear what a K will sound like with it!
Want to sound like this? Here’s what you’ll need! (Affiliate links for which I may be compensated)
1320 B-Series Twister Headers: ebay.us/VxLjne
Magnaflow 2.25" Cat: amzn.to/3nktkAl
Vibrant 1140 2.25" Ultra Quiet Resonator: amzn.to/38PKgef
Man I can't find them anywhere you still have yours?
Dang. I really wish you would have shown the engine bay.
Unequal length headers are my favourite. I want one so badly for my own car.
They are in stock now!
@@TheUnhappyEmo1 ooo whereabouts?
@@Virjoinga you can go to 1320 website or go on ebay and search "1320 UEL header"
@@TheUnhappyEmo1 cool as I'll check it out
@@TheUnhappyEmo1 well they must have sold out quickly because there are none at all on the 1320 website.
EDIT:
I check eBay and wow there are much more than before like you said. They also aren't overpriced anymore! Might pick one up!
I want to try UEL headers on a three cylinder, like the Civic 1.0.
Two long and one short should make it rumble even more as its uneven. 👍
Its so funny 95% of Subaru lovers always say "I miss that Subaru boxer burble" "You can hear the boxer rumble from a mile off and you know it's an impreza". When thats complete nonsense!. That burble/rumble has nothing to do with the boxer engine. it's the Unequal Length Exhausr headers being pushed through a single back pipe that causes the "Subaru Burble". You could modify your 2021 Civic bottom of the range with plastic interior to sound like a vicious "boxer" burble if you install a set of proper UEL headers.
People always saying "That boxer rumble". none of them seem to notice that after about 2007, the "boxer rumble" is gone... funny that isn't it? but... all imprezas, even 2021 STi S209's and White edition STi's are still using that same late 1980's horizonatally opposed Flat 4 2 litre Turbo Charged EJ20 engine, but how come now when you accelerate like an animal even in the 310+ horsepower limited edition machines, they sound the same as if you were accelerating in 1993 Toyota carina E 1.6litre standard edition, or anything similar? The engines is identical in every way to the older ones bar some upgrades... did they hide the "Boxer" rumble? Nope. It never existed lol.
It's an exhause sound. From exhausts being fired out of at different times to eachother.. like this one here... causin... "boxer" rumble hehe hopefully thats all cleared up with every Subaru owner on earth/ cheers!!!
Youre tripping the 2008-2021 STIs use the same EJ engine that was being used in the 90s. And they still are UEL headers
Flat out wrong. It also has to do with firing order. That's why stock imprezas still sound rumbly
FB and FA engines sound like b series Hondas with a low rev limiter and no "subie" rumble whatsoever lol
This sounds dope man! Do those headers bolt up to the stock exhaust or is it all custom?
It sure does! The owner said It comes with slip fits to delete the cat and should mate up. This one needed a bit of tweaking because it has RT4WD so the driveshaft is in the way a smidge
a Honda Forester, that's what it is
With Symmetrical VTEC 🤣
this is the best video for the sound of uel thanks
Sounds better than most WRX STI's now days don't know TFW is going on with Subaru any more #NoCap
Will it work with a k24z1? 3rd gen crv?
Well this work for an 06?
Sounds so nice
i want to get some uel headers for my 2002 honda accord coupe, it has the 2.3l 4 cylinder i think its the f23a engine but i cant find anything for it
Amazing sound!!!!
If it has one collector and one flange, then it’s a HEADER. If it has two collectors and two flanges, than it’s HEADERS.
Cool video man. I’ve waited forever for a video like this. Does the header clear the stock radiator or would I have to get a smaller radiator to make header fit?
Sorry for the slow replay, no modification needed up front!
I love uels a lot because imo it makes 4 bangers sound like 8 bangers. Thinking about building a sloppy uel for my Dodge Caravan gambler.
It does not make it sound like an 8 banger lmaoo don't kid yourself
Bet it’ll sound like a bug if it’s a low revving engine
@@DrunkenVtec I agree but you gotta admit it slightly mimics it. And at the very least it sounds better than a standard 4c lol
@@snowfox7739 in comparison to American v8's like the srt8, or the mustang (5.0) GT, Noooo, sounds nothing like those, not even a lil bit, but you will find some Mercedes Benz's that sound somewhat similar at higher rpms...as you mentioned, you'll never find any 4 bangers that actually sound like this unless they're also running uel's, and to non-car folks who are not really hip to all bolt ons, many of them will easily mistake this CRV for having some type of v8..if you were to thrown a 4 inch racing muffler on this crv tho, it would be much more convincing since it'll have a deeper tone...
Wana put some on my Ef sedan but it's a carby d15b would sound cool but it's slow.
Do it dude, noises make your car more fun and “fast”
Cool!!
Thanks man! Enjoy the holidays!
Why is the cost coming up so much over 9 k
The header is out of stock currently I'd check back in about 3 more weeks.
I’m praying it comes back in stock
@@bstruck7446 spoke to 1320 rep they told me 7-15 days that was 6 days ago. They will be back soon now I’ve got big plans for one
@@TheUnhappyEmo1 bless your soul!
@@bstruck7446 Just a heads up the header came into stock yesterday! I already got my order placed and hopefully soon i'll be able to hear what a K will sound like with it!
I had a custom made ue headers for my d17a2 on my em2 and I miss it so much after wreckimg it.
I have one vid on my channel.