5 Quick Table Saw Hacks Part 3 / Woodworking Tips and Tricks
Вставка
- Опубліковано 8 бер 2018
- Today we review 5 More DIY Table Saw Life Hacks!
Sometimes we only need temporary adjustments or accessories for making special cuts on the table saw and here are a few ideas for making those cuts without having to make special jigs.
******************
Woodworking tips and techniques Playlist: • Woodworking Tool Tips
5 Table Saw Tricks and Tips Part 2: • 5 Table Saw Tricks and...
5 Table Saw Tricks and Tips Part 1: • 5 Quick Table Saw Hack...
******************
**** Full Article on these Table Saw Shop Hacks : goo.gl/j79dCY
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb
** Connect with me on Google+: goo.gl/7fotJq - Навчання та стиль
I love the story board! Can't believe I never thought of it. I guess that's why you're the master and we're the students. 👍
Hi Colin! I hope you realize what a tremendous help you are to people like myself. You give so many great tips, and you're very good at explaining everything! And as a side note, you have a fantastic personality! Thank you, sir!
The story board is a great tip. I really like the method for cutting repeated thin strips too, I’m always cutting thin strips for a lot of my projects
Hope it helps! Thanks for watching!
I have an ancient, beat down, and broken old job saw that I have been trying to figure out how to do a zero clearance insert on. You nailed it. Thanks!
You're welcome! Thanks for watching!
I just have to say, this is my first view of your channel. I am just starting to get interested in home woodworking as I come from a family of pretty impressive carpenters. I love how quickly you get into the "meat" of your videos, and how you don't waste time on needless opinions. It's all very helpful and succinct. Thank you.
Great suggestions, as always, Colin. I particularly liked the storyboard and the epoxy for renewing the zero clearance insert. Thanks for sharing your knowledge!
Story board... brilliant! Good stuff Colin. Cheers, Chris.
Thank You, CrossWood!
Thanks for your videos I’m 76 and a new wood worker, about 10 months in, I have improved so much just watching your videos, and yes, I still have all 10finger
The beauty of these hacks is in the simplicity. Absolutely genius! Thank you.
Love the thin strip alternative method of using "the other side" of the fence. Thanks for sharing!
I'm always looking for good ideas but it's rare to find simple, logical and easy to use tips. You managed to do it. Thank you.
I love this Zero clearance “insert” hack. It can only be described as BEAUTIFUL. Thank you!.
For mixing Epoxy: I cut the sides out of empty plastic milk jugs and use those for mixing on. No big advantage for clear epoxy, but for JB Weld and the like, incomplete mix swirls can be easily viewed through the bottom. Once cured, flexing the mix 'sheet' a little will pop off the remaining epoxy, leaving a clean sheet for next time.
Thanks for the tip and thanks for watching!
Thanks Colin. Love the storyboard idea.
You're Welcome. Thanks for watching!
love the tip about epoxy for new zero clearance. I'm going to try that tomorrow!
I normally don't like hacks but yours are fantastic!
As always, great tips Colin. Thank you!
Really clever and useful tips. I bought my first table saw today and will be using these for sure. The story board is genius! Thank you 🙏
John I’m too
Got wiser after a few minutes of watching this video.. Thank you for sharing
Clever, clever, clever. Greatest tips ever! Well done Colin and thanks for sharing. 😊
The story board is genius. Thanks!
GREAT tips my friend. Got a slightly older Craftsman table saw and it's got the worst throat plate design ever. Not even close to being flush with the top of the table and huge gaps abound. This video was exactly what I needed. Love the thin board on top idea. Thanks!
I made a story board today!!! That thing is AWESOME!!!! Saves so much time now
Colin you never fail to educate, entertain and elucidate. Thank you so much!
Thank You, Carl!
This was among the most useful 8 minutes I've spent on UA-cam so far. Many thanks for sharing your knowledge!
You're welcome, Stamatis! Thanks for watching.
As a new woodworker, I have been watching a LOT of videos. While many are helpful, Colin’s quick hacks are quick, to the point, and very helpful. Thanks and keep them coming.
You're Welcome, Bob!
Those are excellent suggestions, Colin, particularly the "storyboard" - that saves a great deal of time as a reference guide. First-rate stuff !! Thank you :D
Pretty ingenious stuff. All good ideas. Sliding the thin sheet of wood along is genius. And the storyboard is terrific. Glad I saw this. Need to write these things down.
Agreed Adrian. Storyboard idea is awesome. Some other gems in there too Colin. Thanks as always for sharing out your wisdom.
You're Welcome, Andrew!
Very good stuff! Each was well thought out and very well demonstrated. Been woodworking over 45 years, You provided very useful tips here! Thanks.
Awesome.....you have become my "GO TO" when as a newbie I can't figure out what to do. Thanks a million!!!!
You're welcome, Bishop! Thanks for watching.
I found your idea about repetitive cutting of same-width pieces to be awesome! Thanks for the other great ideas as well!
Love your tips and tricks! Always practical and useful.
This is the second time I have received good ideas from you that I use in my shop. So, this time ... THANKS !
I've been following your wood working hacks. They are ingenious! The Storyboard hack seems so easy yet, I didn't think of it until I saw your hack. PLEASE, keep them coming. I've learned so much just watching your hacks THANK YOU VERY MUCH!
You nailed it Sr.
Thanks for sharing!
All really helpful tips. Story board won the day!
I like coming back to these tips. Great stuff. Thank you 👍😎🇦🇺
I just retired and want to do more wood working. I've learned a LOT just by watching a couple of your videos. Thanks!
You're welcome! Thanks for watching!
The epoxy tip has been filed for future use,brilliant Colin👍👍👍👍👍👍👍👍
Glad I could help! Thanks for watching, Alan!
I always learn when I watch your videos. Thank you Colin.
You are certainly a Wizard With Wood!
very useful tips. Thanks for sharing
You're welcome ... thanks for watching!
Love the story board idea! Thanks!
I'm am just starting to use a table saw and that story board tip was phenomenal! Thank you!! 🖖😘
Thanks Colin! Those were some of the best tips I’ve seen anywhere!
You're welcome! Thanks for watching!
Impressive and creative solutions.
Old video with timeless help.
Genius, brilliant ideas… thanks Colin.
Such awesome tips! My dad was a craftsman, carpenter, woodworker genius. Did amazing stuff, but unfortunately did not pass this skill and kraft down to me so thank you for these inspirational videos. I won't make the same mistakes with my kids.
That storyboard idea! This is going to help me out a lot. Thanks!
You are a Gentleman and a Scholar! You never cease to amaze me. Thank you.
You're Welcome!
Wow, you are exactly right when you say these tips can make my life easier. The things you tell us is just so good Colin! Like I’ve said before I am fairly new to woodworking but the wealth of information I have learned from you is just wonderful. Thanks again so much.
You're welcome, Beck! Thanks again for watching.
When your good, your good!! Great tips!
Always a pleasure to watch you. Thanks for sharing
Great stuff! For mixing epoxy I use 3 oz disposable bathroom water cups and popsicle sticks.
Colin you are awesome! Thanks for sharing
Great job again Sir! I love your table saw videos! A great help!!
Just AWESOME, thank you Colin, very usefull.
Love your videos-OLD but still learning!
I'm just starting woodworking and I'm subscribed to you for a couple of months. Honestly at first, I'm just ignoring your videos but after buying my table saw 5 days ago I gotta say, I've had all your table saw hacks in my favorite videos here in UA-cam and I'm 100% sure I'll use your hacks sooner or later. Thank you for this and greetings from the Philippines Colin
P.S. Sorry for bad English
Very interesting, even for we who do not have a table saw. For example, the storyboard for setting fence position for cuts. I can use that method when setting up rip cuts on my radial arm saw. The only difference is that the fence is fixed and it is the blade that is moved to position.
Thanks for the tip and thanks for watching!
Thanks for the tips, especially the story board one.
You're welcome, Kathleen! Thanks for watching.
Great video, though if I haven a scrving blade, I need a slight differnt alternative. Can you include in your next tips video?
Thanks for the great tips Colin! I really appreciate your efforts.
You're Welcome, Mark!
Just getting started in all this ( finally have time). But did want to say that I really enjoy you tips and tricks .. storyboard is a great idea, one of many. Very well done..Thanks
Great ideas! I know I’ll never remember them, hopefully one will stick with me.
Thank you for this video. I have a beginners 10 inch Ryobi table saw that I bought a few years ago when I was getting into woodworking. I really don't like using it because the fence system absolutely horrendous. I like the storyboard idea. I used to cut strips of wood to use as quick spacers between the saw blade and fence but your method makes a lot more sense. It allows for many common measurements on a single piece of wood.
I was thinking about rebuilding the table saw fence system. I bought the wood online today but after seeing this video I might not need to.
Never thought about a story board for the table saw b4... good idea and going to try that epoxy trick
You have just saved me so much work. Thank you.
Terrific tips as usual Colin! Thanks for posting this...................
You're welcome, Sapele Steve! Thanks for watching.
Zero clearance insert
I make my splines the width of my blade and now I can do that safely and accurate using your trick , TY !
Like that story board. My fence has to be resquared every time I move it. Good 💡idea on making marks by using the actual blade. The best..
Thank you for publishing this video. Very informative.
Absolute genius borne out of years of experience, excellent Colin thank you so much for sharing.
Outstanding tips. Really enjoy these quick hitter tricks!
Great new tips I haven't seen before. I had been considering purchasing the Rockler thin strip rip jig as being less expensive than making my own that fits into my mitre slot, but only having a jobsite Dewalt table saw, I've found the slot ISN'T machines the same width off by 1/64" to 1/32" - this makes making runners either too loose or too tight. The other issue is that is is slightly oversided for 3/4" so standard locking mitre bars are too loose (need to add tape). Simply using a long board on the opposite side of the fence with a "sample" width piece you want your thin strips to be and to be consistent solves all that other hassle and expense. Also super tip on refurbishing a home made zero clearance insert.
Outstanding video! Thanks for adding great content for my table saw.
Thanks Colin. I'm a newbie and a woman luv your channel luv the story board idea....I've only got a cheap table saw and am building a new fence... I've failed 3 times but practice makes perfect. .😆
Nice Colin. I liked the one where you clamped the scrap on the opposite side of the fence and used a thin strip as a spacer. Great idea!
Thank You!
Colin that's such a good idea ... Many Many Thanks from the UK
Thanks a lot for these ideas, they were great. I will definitely be using them. Love your videos by the way.
Normally I have an issue with most channel hack tips, but these are handy tips. Some not as handy as others, but all are very useful depending on the features of your saw. Thanks for the video.
Very handy series of tips and tricks for the table saw, as a new guy in the hobby, it has been quite helpful.
As a new guy, I did a bunch of book learnin', but no matter how 'prepared' one is, you don't realize what you don't know till you are looking at 50 razor sharp teeth coming right for ya at about 300 feet/second. With a lil hands on practice, you know what you need to learn, and this covered most of it for me (for now, of course, life is long after all).
Your helpful vijeos has/will make my life easier, and more likely to die with all my original fingers, which is comforting (as a dude with a B.Sc in Chemistry, losing fingers was already a very real possibility, so I need all the help I can get).
I would also like that thank ya for some of the info on kickback you've given over time. Had my first one today actually, I was pretty sure it would happen (thanks to your info), so I made sure when the suspect fragment got thrown, it would go into the cement wall (not me), and my hands would be well in a safe spot. I mention this as had I acquired these tricks this morning, I would have known how to make the cut safely. Of course, I might have forgotten as us human peoples tend to not remember stuff so great unless we realize our life depends on it. But now I know and am quite thanful.
Oh, and I kinda wanted to experience kickback in a controlled way, to feel how it happens in a controlled manner, rather than be surprised (and hurt) later on. Also, I got to test it out in front of a friend (I was helping him make shelves), so I got to look super bad ass and add a few stamps to my man card.
Hey, my Dad wasn't handy, so I am learning from the ground up, and you have been very helpful in that pursuit. Thank you.
PS I have a question (if you are able to get around to getting to it, of course); I have an older crappy Cryobi portable table saw. The issue is that the fence is crap. It doesn't stay parallel to the blade when clamped down, only going all KattyWompus on an angle. Other than using a tape measure to ensure alignment each time (thanks for the tip), is there any method you are familiar with that could save me a fussin and a feudin by improving the fence I have?
Please bear in mind, the Cryobi was a free gift, would not be my first choice if it was my money. And the frustration of multiple measurements and calibration between different cuts drive me nuts, and I figure if there's an easier way, you'll know it.
Have a good one eh,
and
"I'll catch ya on the flipside"
Good tips. Thanks for sharing!
Excellent advice - Thank you
You're Welcome!
All great tips! Thanks!
Great tips, especially the story board!
Wow! So many great tips.
Colin....you have put out great videos with terrific and practical woodworking advice. Thank you!
You're Welcome! Thanks for watching!
Love your ideas and your friendly presentations! BE SAFE,GOD BLESS!🇺🇸🙏❤
Storyboard looks amazing ngl.
Amazing!!! Thank you!!
Been a winter of having puppies but getting close to being ready to start on spring projects and watching a few of your videos is pretty good way to get me excited. Enjoy your advice and only wish you was closer so I could visit
Great tips as usual and Thank You
You're welcome, Paul! Thanks for watching.
Excellent tips. Thank you
Great tips thank you for sharing!
Man, I like the thing's you showed us here. All are GREAT to know and Learn. You sure have me Hooked on your Fanatic Idea's👍🏼
I've been using a pair of 1*2*3 blocks for quick setup, but the story board is pretty good.
Hope it helps!
Terrific video! Valuable info. Thanks.
Thanks so much Colin, love these very useful tips!
You're Welcome.Thanks for watching, Graham!
Excellent ideas thank you