LOL - as long as you are using clean and dry hands - touching for a millisecond isn't going to do anything bad to the gold plating. That warning was to stop any dirt on your hands transferring to it - or wiping it off - so that gold plating may get wiped off. Touching for a millsecond is harmless as long as your hands are dry and relatively clean.
@@PunkersPlays so I figured it out! They are daisy chains! Look them up should be able to find a video, you gotta find the power piece and just connect that to any part on your MB
I just fried my computer by drooling all over it after watching this! LOL Nice system. Adata is great stuff....i have 32G in my old AMD 8 Core machine...still tickin' 8 years later...
You installed the PSU upside down. Proper airflow is more important than keeping the label upright. An oversight made and excepted by many but considering the PSU and case are made by the same manufacturer is just incompetence.
Esto es hermoso, aunque en lo personal no hubiera escogido ASRock hubiese escogido una placa Asus para sincronizar mejor las luces su software funciona mejor.
Could you help me with this case? I'm having trouble with connecting the system fans to the motherboard. There are two wires coming from each fan and both wires have different male and female headers. Are they supposed to be connected with each other and then one connector to the motherboard? Could you explain that or direct me to a tutorial that mentions this?
I have the same case. Built my first PC a week ago. With the lack of instructions, it was VERY CONFUSING and a HEADACHE. I didn't know what cables were RGB, which were fans, etc. But regarding the fans, they can all be plugged in together (since there's a male and female split) then you connect the final fan plug I to the motherboard. One problem with this is if you change the fan setting for that port, all of the fans all have that setting. If you want to control the fans separately, then connect them to separate fan ports. The front 3 fans, I joined together into 1. The rear fan I plugged into another.
@@fashionrider57 need help with 3 cables that are 4 pin coming from front io, where do they go on motherboard. This is my first pc build. Any info where i can learn to connect the fans?
@@josemadrid8879 those are for your 3 front fans. they can be connected together with a splitter so they all join into one 4-pin plug. That plug can plug into any of your motherboard's fan ports (look at your motherboard's manual). By combining the 3 fans into one plug, the computer can control the 3 front fans together. in other words, all 3 fans will spin at the same spin always, which isn't a bad thing. just remember that each fan will have an aRGB (3-pin) plug and a 4-pin fan plug. Don't assume the lights will work if you just connect the 4-pin plugs. that'll just operate the fans and make em speed
Most pc nowadays don’t come with them anymore. I guess because u can use a flash drive, or download straight from the internet. also we live in the streaming age for movies. However, I always like having a CDR as backup, it is unfortunate a lot of pc cases don’t come with them anymore, especially gaming pc’s. U can alway get an external one.
muy buen video, pero no me convence que haya extraído los fans de fábrica de la refrigeración ya que estos están diseñados para inyectar el aire de una manera especial en el radiador. De ahí parte mi duda con respecto a la distribución del aire del battlecruiser y las refrigeraciones líquidas, ubicar la refrigeración líquida en el frente del pc, significa un sacrificio para el ingreso del aire (y este chasis está diseñado para inyectar mucho aire por el frente) y si se ubica el radiador en la parte superior, los fans no cogerán mucho aire fresco y por ende la refrigeración líquida no trabajara al 100%, sin contar el sacrificio de la falta de extracción de aire caliente que genera la placa madre y la tarjeta de video, que dilema! me quedo entonces con el XPG INVADER, que tiene el espacio en la parte lateral para un radiador de 1 o 2 fans!
Yo como sólo utilizo discos de 2.5” lo que hice fue remover la sección para discos duros de 3.5” e instalar allí un ventilador para más entrada de aire... Y luego en la parte de arriba hacia el frente puse un “Corsair iCUE h100i RGB Pro XT” pero además instalé 3 ventiladores extra en la parte de arriba para sacar aire más rápidamente... 2 de ellos haciendo el efecto push-pull en el radiador de 240mm... Y pues así todo súper bien la verdad :) Las temperaturas geniales con un Ryzen 7 3700x y una EVGA RTX 2070 Ultra Gaming OC.
3:08... you´re so smart.
Best time lapse builds by far! It has the right amount of lenght and detail! Keep it UP!
i was waiting for you to show the case with a riser cable setup,i wanted to see it
Love to watch your video before bed, so relaxing, keep up the good work
5:26 - You're not meant to touch the gold contacts buddy.. \o>
LOL - as long as you are using clean and dry hands - touching for a millisecond isn't going to do anything bad to the gold plating. That warning was to stop any dirt on your hands transferring to it - or wiping it off - so that gold plating may get wiped off. Touching for a millsecond is harmless as long as your hands are dry and relatively clean.
Water cooler wrong installed!
I love the RGB cables😍😍
Why you dont put the radiator up and use the entire airflow coming from front fans?
Does the top support 360mm liquid cooler?
The Rad should be rotated to the back of the case. Look at your RAM, the strings are cover the beautiful of it.
How you can connect the argb control button?
First pc build ? the power supply though
so blue ray/dvd is just past tense nowadays? i have 1 and don't use it but u never know. might be the lil thing to look at other cases oh well..
I was hoping to see how you connected those female fan & male rgb fan connections?
I just bought this case and I'm so confused on that part. The fans are powered up and moving but no color😭
@@hanzohattori75 I’ve got colour but no movement lmao 👍
@@PunkersPlays so I figured it out! They are daisy chains! Look them up should be able to find a video, you gotta find the power piece and just connect that to any part on your MB
@@PunkersPlays how did u get the lights can u help me?
I just fried my computer by drooling all over it after watching this! LOL Nice system. Adata is great stuff....i have 32G in my old AMD 8 Core machine...still tickin' 8 years later...
Do you need the extension cables?
Hello, do case coolers connect to each other?
can you do a full video tutorial?
@techraptor what the software do you used for rgb ?
Wait it comes with stuff so you can build it?
No 😂😂 only rgb cables and screws that are needed to screw the parts in the case
Can you make a build with the Starryfort sf30?
Can someone tell the measurements of that left side window panel that comes out?
Thanks!
You installed the PSU upside down. Proper airflow is more important than keeping the label upright. An oversight made and excepted by many but considering the PSU and case are made by the same manufacturer is just incompetence.
most cases now have a mesh on the underside of the pc case. Which makes the psu have better airflow with the fan facing downward.
si le quitan la etiqueta quedan muy estéticos los ventiladores
What processor are you using in that set up?
O need help connecting the fans can you help me please?
Hey. Just got my one. But theres no argb controller so i cant plug my fans :// what should i do
I have the same issue :( i connect all and the toggle button dont works
The RGP controller actually comes with the CPU cooler, otherwise you'll have to buy a separate one
Esto es hermoso, aunque en lo personal no hubiera escogido ASRock hubiese escogido una placa Asus para sincronizar mejor las luces su software funciona mejor.
MSI funciona todavia mejor
Could you help me with this case? I'm having trouble with connecting the system fans to the motherboard. There are two wires coming from each fan and both wires have different male and female headers. Are they supposed to be connected with each other and then one connector to the motherboard? Could you explain that or direct me to a tutorial that mentions this?
Same issue here 💔
I have the same case. Built my first PC a week ago. With the lack of instructions, it was VERY CONFUSING and a HEADACHE. I didn't know what cables were RGB, which were fans, etc.
But regarding the fans, they can all be plugged in together (since there's a male and female split) then you connect the final fan plug I to the motherboard. One problem with this is if you change the fan setting for that port, all of the fans all have that setting. If you want to control the fans separately, then connect them to separate fan ports. The front 3 fans, I joined together into 1. The rear fan I plugged into another.
The dame issue i cant connect the argb controller ;(
@@fashionrider57 need help with 3 cables that are 4 pin coming from front io, where do they go on motherboard. This is my first pc build. Any info where i can learn to connect the fans?
@@josemadrid8879 those are for your 3 front fans. they can be connected together with a splitter so they all join into one 4-pin plug. That plug can plug into any of your motherboard's fan ports (look at your motherboard's manual). By combining the 3 fans into one plug, the computer can control the 3 front fans together. in other words, all 3 fans will spin at the same spin always, which isn't a bad thing.
just remember that each fan will have an aRGB (3-pin) plug and a 4-pin fan plug. Don't assume the lights will work if you just connect the 4-pin plugs. that'll just operate the fans and make em speed
where is cd room?
Most pc nowadays don’t come with them anymore. I guess because u can use a flash drive, or download straight from the internet. also we live in the streaming age for movies. However, I always like having a CDR as backup, it is unfortunate a lot of pc cases don’t come with them anymore, especially gaming pc’s. U can alway get an external one.
LO SABIAAAAA el radiador no queda bien arriba por la bandeja que esta mal diseñada igualito me paso lo quería poner arriba y termino en frente
Whats the CPU ?
Regalame una PC ._. Y gran video
lol i follow you on instagram, thats a very fun coincidence
Eu tenho odeio de ser pobre qndo vejo essas coisas!!!
Can u give this for me
Much Xpg
muy buen video, pero no me convence que haya extraído los fans de fábrica de la refrigeración ya que estos están diseñados para inyectar el aire de una manera especial en el radiador. De ahí parte mi duda con respecto a la distribución del aire del battlecruiser y las refrigeraciones líquidas, ubicar la refrigeración líquida en el frente del pc, significa un sacrificio para el ingreso del aire (y este chasis está diseñado para inyectar mucho aire por el frente) y si se ubica el radiador en la parte superior, los fans no cogerán mucho aire fresco y por ende la refrigeración líquida no trabajara al 100%, sin contar el sacrificio de la falta de extracción de aire caliente que genera la placa madre y la tarjeta de video, que dilema! me quedo entonces con el XPG INVADER, que tiene el espacio en la parte lateral para un radiador de 1 o 2 fans!
Yo como sólo utilizo discos de 2.5” lo que hice fue remover la sección para discos duros de 3.5” e instalar allí un ventilador para más entrada de aire...
Y luego en la parte de arriba hacia el frente puse un “Corsair iCUE h100i RGB Pro XT” pero además instalé 3 ventiladores extra en la parte de arriba para sacar aire más rápidamente... 2 de ellos haciendo el efecto push-pull en el radiador de 240mm...
Y pues así todo súper bien la verdad :)
Las temperaturas geniales con un Ryzen 7 3700x y una EVGA RTX 2070 Ultra Gaming OC.
Tanta basura para decir algo tan sencillo y criticar!
I can't get the fans to work, help?
U prob plugged it in the wrong slot or backwards
Hi Asus aura fans ? 3pin aRGB?
Is xpg is your dad's bbf
5:54 XD
the vertical gpu model, killed the gpu because the fans don't have a space to take air , sorry but the pc case is garbage.. not recommended.
Why time lapse...I'm a noob...regular time better for moi
if u lose the remote theres no way to change the lights dont buy this piece of shit