If you enjoy our tutorials consider joining our channel to support our creations, receive early access to videos, and monthly shoutouts 💙 ua-cam.com/channels/zbm-Nei-GzNwjlA2S-MR-A.htmljoin
Absolutely gorgeous 😍 one of the best colour combos I've seen. So classy ☺️ I have a doubt - how do you avoid spillage of clear resin out of the trays while you fix the tray handles? Because your product is already out of the mould
I love the gold handles. I'm not seeing them on your list. Where can I get these? I like how short they are and seem like they would be easier for install
Joaquín es irrepetible como persona y como jugador. Ama con todo su corazón al Betis, él es el Betis...No le será fácil aprender a vivir sin su campo, sus compañeros,su club,su pasión en cada pase pero como eres un hombre con un corazón que no te cabe en el pecho Dios y tú familia te ayudarán a saber llevarlo. Ahhh y con esa personalidad,ese arte ,esa risa, ese buen gusto siempre serás querido vayas donde vayas. Nadie te olvidará ❤❤
Love all your videos! Are we able to pour resin over dry resin ? I made a tray and golf flakes sticking out but it’s been drying for 2 days now? Is it too late to add another layer? Thanks!
Hi Absolutely love your videos..learning a lot through them. Just one question..will this technique work same way if we use mica powder instead of pigment paste??
Thank you! 🤍 There’s only a smell when the resin is heated up (using a torch gun or heat gun) which causes the resin to release chemicals. This is why it’s very important to work in a well ventilated space and use a face mask!
For making this tray do we have to pour layers in different times? Also do we have to use some clear resin at first ? My final 2 questions questions: the amount of pigment for each cup has to be equal or not ? I made a tray as a result my tray didn’t come out hard it is softer and flexible, can you tell me why this is happened. ? Thanks
Hi! I provide guidance, tips & tricks, and more as a part of my new Patreon page under the tier ‘Summer Sponsor’ where I’d be happy to help you with all of your resin questions and guide you along the way: www.patreon.com/summergirldesigns 😊
Ration of resin always mention on the bottle if for example it's 3:1 means you have to take 3 gm resin liquid and one gm hardener and mix both until it will get transparent and always use weighing machine
Hi, I use Dipon’s jewelcast b20 3D. I poured a cake stand the day before yesterday and it went very well. Then I sanded the edges and poured a second layer (topcoat) over it. I always have with cake stands that the second layer has amine blush when cured. The temperature and humidity were perfect. I only have the amine blushing problem with the top coat of cake stands. I have not done anything with wet wipes or something. Can someone help me? I’m in real trouble and I can’t figure it out.
Hi! Blush can occur due to several reasons, so it can be tricky to find out exactly what is causing it. Humidity as you know is the top reason, but if the humidity level was fine then it could possibly be from over heating the resin (too much torching or using a heat gun to pop air bubbles). I get blush sometimes in my pieces as well, but I always top coat either with DCS Resin or Honey Resin, and have never had a blush problem with those. I would recommend trying those out as well for top coats! Hope this helps 😊
If you enjoy our tutorials consider joining our channel to support our creations, receive early access to videos, and monthly shoutouts 💙
ua-cam.com/channels/zbm-Nei-GzNwjlA2S-MR-A.htmljoin
Sooo Beautiful !!!
these look like flowers, beautiful!
These pieces are gorgeous!!!
Those came out insane!! They are so stunning.
You should make coasters with this same design! They would sell out, I love this combination. Too pretty! :)
So beautiful as always
Beautiful! I really like the way the gold layer on the back shows through
Thank you! 💗
I loved the clear in the middle! So pretty! 🤩
Beautiful!
I loved!
amazing result👏🙌
great video and such beautiful colors. I used your summer code and ordered the resin, I cant wait to give it a try!
I just found you. And I’m glad I did because these two pieces are just gorgeous. I really love them you did a great job.
So pretty will definitely have to try this technique in some coasters I love the effect!
They’re gorgeous
Thank you! 🤍
Wistfully Gorgeous ❤
Nice
And thanks for the video
Awesome!!! it's very beautiful ...do u sell this I wanted to place snow order
They're cute 😍
Great job
Woooooooow adipoli. It's soooooooo beautiful. Hats off to your talent. Please let me know, how you fixed the handles?
Absolutely awesome mam
Absolutely gorgeous 😍 one of the best colour combos I've seen. So classy ☺️
I have a doubt - how do you avoid spillage of clear resin out of the trays while you fix the tray handles? Because your product is already out of the mould
Beautiful! Is pigment paste better than mica powder?
So beautiful. Where did you get your small torch?
Spectacular ❤❤❤
Can you tell me do the trays remain rubbery? Like when I pick up the tray they bend? Beautiful designs.
I love the gold handles. I'm not seeing them on your list. Where can I get these? I like how short they are and seem like they would be easier for install
stunning colours 🥰
🤍✨
Waoooo expectacular bellicimo trabajo
Suuuuuuuuperb 👌🏻
Really great art,i myself want to try but the material is used in making these amazing trays is difficult to.collct
Hello, I just wanted to know if we use a hair dryer instead of the big blower u used in the last will it still work?
Beautiful
Magnifique
Nice work....what did you to giving stroke of golden and white on borde????was it hair dryer??
Awesome thanks for sharing can I ask how much resin do I need to make. 4 coasters thanks in advance
I wanna ask that during using mold we can also finished it in 2 layers like as first gold layer 2nd gold foil
so cute
Masha Allah Beautiful
Asalamoalykum
Hi...loved it. Can I use mica powder for golden and acrylic paint for white instead of pigment paste?
Joaquín es irrepetible como persona y como jugador. Ama con todo su corazón al Betis, él es el Betis...No le será fácil aprender a vivir sin su campo, sus compañeros,su club,su pasión en cada pase pero como eres un hombre con un corazón que no te cabe en el pecho Dios y tú familia te ayudarán a saber llevarlo. Ahhh y con esa personalidad,ese arte ,esa risa, ese buen gusto siempre serás querido vayas donde vayas. Nadie te olvidará ❤❤
Hi,
After removing from tray, the gold pigment resin you poured at the back of the tray ?
Pl explain..
Love all your videos! Are we able to pour resin over dry resin ? I made a tray and golf flakes sticking out but it’s been drying for 2 days now? Is it too late to add another layer? Thanks!
Thank you! Yes, if it’s been more than a couple days I lightly sand my pieces with sand paper to make sure that the two layers bond together better 🤗
@@SummerGirlDesigns won’t sanding get rid of the clarity though?
@@conisalgado1294 yes, but once you add another layer of resin it will become clear again!
Can we use mica powders or liquid pigment for this ?
Hi
Absolutely love your videos..learning a lot through them. Just one question..will this technique work same way if we use mica powder instead of pigment paste??
Perfect.
Hey I love what you 💕the resin/epoxy that you use does it give a bad smell?
Thank you! 🤍 There’s only a smell when the resin is heated up (using a torch gun or heat gun) which causes the resin to release chemicals. This is why it’s very important to work in a well ventilated space and use a face mask!
You didn’t tell how did you attach handles?but you did excellent work. Stay blessed
For making this tray do we have to pour layers in different times?
Also do we have to use some clear resin at first ?
My final 2 questions questions: the amount of pigment for each cup has to be equal or not ?
I made a tray as a result my tray didn’t come out hard it is softer and flexible, can you tell me why this is happened. ?
Thanks
Hi! I provide guidance, tips & tricks, and more as a part of my new Patreon page under the tier ‘Summer Sponsor’ where I’d be happy to help you with all of your resin questions and guide you along the way: www.patreon.com/summergirldesigns 😊
Do you add the epoxy resin and hardener in the cups?
Do you do any sanding between coats?
What is the difference between high viscosity resin and low and when and how to use them in different things?
Where do you buy the edding marker? Is there a certain kind to get?
Do we have apply any spary before pouring resin
Molto bello.
Can we use Acryl color for coloring ?
Do you always have to top coat the resin?
Do you have a link for the gold handles on rectangular tray? Love these!
Thank you! I got them at a local craft store, but I've found similar ones available on Amazon: amzn.to/3Q6BydL :)
Hi. Just not get it that at last you are added gold on tray. Then how it seems at final it white background too?
Mam,which kind of colour you used,pls tell me mam
Ok nice
What material is the container you mixed your resin in? It looks more sturdy than just silicone so I'm really curious! Thank you!
Plastic
I guess
Would you be so kind to advise how you measure qty of resin for both moulds??
On which side we have to stick the handles.. Which side of the tray is serving side?
واووو رائع جدا 💖😍😍
Is this white pigment is alcoholic ink or normal pigment paste?
Is it available on amazon
What do I do if my trays came out flimpsy?
where do you get the molds ?
❤❤❤❤
How did you fixed the handle.
Please reply
Plzz tell me the thing which you used..plzz decribe these thingss
How much resin is used?
Ration of resin always mention on the bottle if for example it's 3:1 means you have to take 3 gm resin liquid and one gm hardener and mix both until it will get transparent and always use weighing machine
Which marker do you use?
Can you use hair dryer?
Hiii. What is the resin viscosity?
How did u attached those handles
Precioso 😍
Mam how to remove bubble from camille's
What is the name of the water-like liquid that you used in the molds, please tell me???
Epoxy resin
How much epoxy used for tray only?
❤superbe❤
What is the gold liquid brand?
What product did you used?
Which resine do u used?
How much of miligram is enough for it
what resin do you used
ماشاءالله
Butiful
What resin do you prefer??
how you installed the handle? by using what
When resin dry 60 % then u instal handels before final coating
How you fix the handle?
Hi,
I use Dipon’s jewelcast b20 3D. I poured a cake stand the day before yesterday and it went very well. Then I sanded the edges and poured a second layer (topcoat) over it. I always have with cake stands that the second layer has amine blush when cured. The temperature and humidity were perfect. I only have the amine blushing problem with the top coat of cake stands. I have not done anything with wet wipes or something. Can someone help me? I’m in real trouble and I can’t figure it out.
Hi! Blush can occur due to several reasons, so it can be tricky to find out exactly what is causing it. Humidity as you know is the top reason, but if the humidity level was fine then it could possibly be from over heating the resin (too much torching or using a heat gun to pop air bubbles). I get blush sometimes in my pieces as well, but I always top coat either with DCS Resin or Honey Resin, and have never had a blush problem with those. I would recommend trying those out as well for top coats! Hope this helps 😊
@@SummerGirlDesigns did you pour a top coat over the blushing? Or did you remove it and sand it before the top coat?
what marker is that?
Excuse me but Is that 3:1 resin ?
I work at Resin and I need support, thank you🌸
Top
How to fit your tray handles on the tray??
There must drill item to get a hole in the risen plate or try than fixed the handle