Taking Apart HP Photosmart C4280 Printer for Parts || Cleaning || Repair C3150 C3180 C4250
Вставка
- Опубліковано 21 лип 2024
- This is a common printer from around 2007. Still liked by many when making this video in 2021. If you need instructions on how to get inside the pr I meet to repair, replace parts, or clean inside of the printer, watch our video and please don't forget to "like".
Please subscribe to our channel @303electronics and share your thoughts on the printer and video in the comments!
Have a great day!
#Printers #PrinterRepair
HP Photosmart C3100
HP Photosmart C3150
HP Photosmart C3180
HP Photosmart C4100
HP Photosmart C4150
HP Photosmart C4180
HP Photosmart C4200
HP Photosmart C4250
HP Photosmart C4280 - Наука та технологія
yay! got this to work on my old printer! it works for another print job. thank you
this helped more than you know man thanks.
I'm glad it did! Thanks for the feedback. Have a great day!
I was hoping the printer would be disassembled enough to show the full paper path because my 4280 has a phantom paper jam. I still don't know where that sensor is.
Over the years it still worked for me until a few days ago. Now it happens that within seconds of connecting it to power the screens turn on and off and say "turn off and turn on again". Faults in the energy and in the voltage adapter have already been ruled out... Perhaps the electronic card of the source? Thanks.
thanks for this! been using the same printer since I graduated high-school in 2008. it has a ton of grody smudges on the under side of the glass. i couldn't get the front to unclip the way yours slid off on accident. i had to stick a bamboo skewer with a coffee filter soaked in rubbing alcohol in there but man that thing WAS dirty. still IS. if you can give me a hint on how to get the front part unclipped that'd be great. also, over the years i think the scanner picks up less pink and cyan. is there a hack for that or is it just time for a new printer? thanks again.
I've grown attached to the thing. had it longer than my paint brushes. used it for all my classes and projects. solid. dread having to learn how to use a new one.
Hi. I apologize for a late reply. I don't have this printer currently. To get inside the scanner area, see if there are are screws that still need to be removed. When you open the front of printer look under, you should see a couple there.
my hp printer wont pick the paper and says theres a paper jam but nothing is blocking the way. i think it has to do with me trying to take it apart when I tried cleaning it.
Hello
Please advise me, I have a printer hp business inkjet 1200, the paper jammed, I took it out, and it stopped working, brings the paper to the middle, and then stops
How can I fix it?
Hello from Barcelona.
The problem with my printer, C4380, is that it takes many sheets at once, so it is imposible to print large documents, unless you keep holding the sheet feeder so it only takes one at a time. Do you know how to solve this problem? Thank you.
Hello. There is a paper stopper that looks like stairs, located at the very end. You can access that piece by opening the back area cover. Check to make sure that piece is no jammed or misplaced. White or black in color. Also, make sure your paper is not pushed too far.
Hi, I write from Italy
I have a problem with my HP c3180 printer.
The print paper end sensor no longer works and this is giving me printing problems, what can I do?
Could there be something ion the way? See this video if it helps. It is a similar build printer:
ua-cam.com/video/5sdTZR0bWJQ/v-deo.html
can you tell me what is the paper present sensor?
This printer does not have a paper sensor. If it gives you a "load paper message", clean the roller like in the following video:
m.ua-cam.com/video/5sdTZR0bWJQ/v-deo.html
Does anyone know the part number of the mainboard of the C4280?
Hola, tengo la misma impresora, la desarme para limpieza y la volví a armar pero al encenderla el carro se queda en el lado izquierdo y si abro la puerta para poner los cartuchos el carro no se mueva hacia la derecha para poder cargar los cartuchos se queda en la izquierda. Que puede ser?
Hello. The problem may be that the connection for carriage is not connected properly either at the main board or at the carriage.
Do you what what causes to the hp photosmart c3183 to not power or not getting power at all please help
Hi. It can be a few things. First of coarse, is to make sure the plug you are using is working, then make sure the power supply is connected proerly everywhere, not damaged. I've seen power cords damaged by pets since it is so thin going from printer to power supply adapter. Pull cartridges out, try to turn printer on without cartridges. Also a common issue is that the port that is soldered on to the mnain board may have disconnected for some reason. It needs to be soldered back on to give power to printer. Thank you very much for your question. I apologize for such a delay in responding.
@@303electronics okay thank you I hope that is the soldered is the problem
@@303electronics i think there was a hissing noise after opening the side near the main circuit board when plug-in on my photosmart c3183
I would never take my printer to you for service based on the way you handled this one. I don't think it would ever work again....🤕
Thanks for sharing your opinion. This video was not meant to show a repair. I simply take it apart. 🙂 Have a great weekend!
cany anyone tell me how to get driver for this printer
you cant been trying all day you can go in to you tube has a way to show you how you can install micro soft drivers in it show a different printer but it didn't work for me i installed thee driver but i don't know if it was the printer or the driver
support.hp.com/us-en/drivers/hp-photosmart-c4200-all-in-one-printer-series/model/3192752
6:50 C-clips?
E-clip actually
can you send me the drivers to this printer
support.hp.com/us-en/drivers/hp-photosmart-c4200-all-in-one-printer-series/model/3192752
Hi, if you have't suitable tools, don't start making movies with disassembly.
Thank you for your suggestion. Enjoy your weekend!
Hi , Please let me know whether I can find the printer name .
Hi. The printer model is on the top, near the screen