Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
I would love to see a build thread/parts list on these! (in English or easily translatable)
Same!!! I found the hentaikit but not sure what front lower arms to use!? I will also be using boom racing toyota axle for extra scale points 😁
I see others using YD2 front parts, now I am trying to find (stock plastic) yd2 front suspension mounts and arms, but all I can find is expensive aluminum versions! 😫
Whoaa...CC chassis....Let me try....had 2 of these...very exciting out of the box...
ロマンでござる🤩👍
実車好きにはたまらん構造でした。CC-01バスタブは実車っぽいですよね~
すだぴょんRCチャンネル 殿そうなんですよね、ドリフトを極めしものCC-01に至る。と聞いたことがありこれかと!
構造にこだわるのも面白そうですねぇ!動きにもその感じが出れば良いのですが・・・ドリフトタイヤのせいか、速度感みたいなのはいい感じでしたねぇ。ラジコンから離れて長いですが悪さしたくなる動画ありがとうございました♪
スケールモデルとしての楽しみ方ですよね~。元86乗りとしては魅力的なマシンでした。ラジコン復帰をお待ちしております!
Please can you tell me the specification of the car? For example what parts were used.
what lower control arms and cvd shafts were used on the front end? im wondering if i can use this for the off road setup. cool video. thank you.
@Steve Vento why not? for a IFS rig you would need central velocity drives...
@hatchlord just looked at the D4 chassis, and i think it is, front cut of a d4 chassis without cc01 front drive or diff housing
This eliminated front drive train. This is for RWD only.
Body ae86 is the best car
カッコいい!!
この2台は色々な意味でカッコ良かったですわ~
What size pinion is fitted? Is it 16t ?
Will you try to use f103GT?
これ作るのいくらかかるんだろ、、気になる、
👍
where did you get the "trueno" shell from
Pandora RC
タミヤで製品化すればいいのに笑笑
ある意味タミヤらしい製品になりそうですよね~
手でタイヤ動かしてステア切ると、サーボ壊れますよ
そんなに簡単に壊れませんよ。現にハードユースしている私のサーボはそもそもオフで使うなどの負荷かけたり、手で動かしたりしていますが、一度も不具合出ていません。気にするレベルでは無いですね。
I would love to see a build thread/parts list on these! (in English or easily translatable)
Same!!! I found the hentaikit but not sure what front lower arms to use!? I will also be using boom racing toyota axle for extra scale points 😁
I see others using YD2 front parts, now I am trying to find (stock plastic) yd2 front suspension mounts and arms, but all I can find is expensive aluminum versions! 😫
Whoaa...CC chassis....
Let me try....had 2 of these...very exciting out of the box...
ロマンでござる🤩👍
実車好きにはたまらん構造でした。
CC-01バスタブは実車っぽいですよね~
すだぴょんRCチャンネル 殿
そうなんですよね、ドリフトを極めしものCC-01に至る。と聞いたことがありこれかと!
構造にこだわるのも面白そうですねぇ!動きにもその感じが出れば良いのですが・・・
ドリフトタイヤのせいか、速度感みたいなのはいい感じでしたねぇ。
ラジコンから離れて長いですが悪さしたくなる動画ありがとうございました♪
スケールモデルとしての楽しみ方ですよね~。元86乗りとしては魅力的なマシンでした。
ラジコン復帰をお待ちしております!
Please can you tell me the specification of the car? For example what parts were used.
what lower control arms and cvd shafts were used on the front end? im wondering if i can use this for the off road setup. cool video. thank you.
@Steve Vento why not? for a IFS rig you would need central velocity drives...
@hatchlord just looked at the D4 chassis, and i think it is, front cut of a d4 chassis without cc01 front drive or diff housing
This eliminated front drive train. This is for RWD only.
Body ae86 is the best car
カッコいい!!
この2台は色々な意味でカッコ良かったですわ~
What size pinion is fitted? Is it 16t ?
Will you try to use f103GT?
これ作るのいくらかかるんだろ、、気になる、
👍
where did you get the "trueno" shell from
Pandora RC
タミヤで製品化すればいいのに笑笑
ある意味タミヤらしい製品になりそうですよね~
手でタイヤ動かしてステア切ると、サーボ壊れますよ
そんなに簡単に壊れませんよ。
現にハードユースしている私のサーボはそもそもオフで使うなどの負荷かけたり、手で動かしたりしていますが、一度も不具合出ていません。
気にするレベルでは無いですね。