Thanks for watching and thank you Chris for letting me showcase your blaster. Been working on another long Build video that is taking some time to edit, figured I would take a break and working on something smaller in time of Ragnarocktoberfest. If you enjoy the Loadout series, my Tutorial/Build videos or my edited Gameplay please consider supporting me on Patreon. www.patreon.com/maketestbattle
Interestingly there did seem to be a difference even in the colour of waffle. The readings in the video were blue waffles, using peach coloured waffles got about 20fps less on average. Granted, the peach ones were older so they may have just been a little more worn out. Also, got lower fps with elites which was interesting
I think multi stage flywheels are cool, but I think the 6 sets are actually decreasing performance and holding the darts back. Didn't the Stanford student on outofdarts have a 3 stage rayven that shot elites at 230 fps?
The problem is that all the stages are rhinos or krakens, which turn at 33k rpm, meaning that the edges of the flywheels (which look like worker wheels to me) are turning at around, unsurprisingly, 195 fps. If the last few stages were swapped out with honeybadgers this thing could probably get into the high 200's, maaaybe 300.
This was my thinking. Honestly, I'm not sure that any but the last flywheel pair is really doing any work. I'm wondering if a multi-wheel system could help with dart damage, by accelerating the dart in stages, with each pair running at a lower rpm than the next, throwing the dart forward into the next stage. Potentially that could prevent the final stage from ripping the head clean off. But you are still only getting your final velocity from the final stage, the prior stages are just to slowly accelerate the projectile. You could probably also use some gearing to get even higher final stage rpms, and since the dart is already moving quickly, you might be able to get away with minimal torque.
You can get constant full auto 170 whit just one cage well mantained is so dissapointing, and yes a less torque more speed Will make the darts go faster but even whit that i don't think that it will get over 250 more than 2 is actually overkill unless You know how to "Gauss cannon" velocities and is not that simple as "faster in the front" "slower in the back" yeah you will get consistency but not extra speed
Don’t know if anyone still watches this video but I find it funny that six cages reach 180 fps and a 2 stage banned blaster cage can blow that out of the water at 300 fps. Great build and vid though
@@panda.monium I would guess that is because the middle stages are all the same RPM and therefore only make modest increases in the speed of the dart.The first stage gets foam build up becaise it accelerates the dart from a stand still and the last stage gets foam build up because has slightly higher RPM and therefore makes a greater increase in the dart speed. ... great work BTW.
I seen some early making shots of this on facebook. Preforms as expected maximum dart speed has been reached by the first/ second set of motors. Time to add a brushless cage with a 5-6s battery!
not sure they'd slow it down but they're likely not having any effect - if he ramped up the speed of each motor so they faster towards the end then they'd all be effective
Some might say that 5 afterburners might be overkill. I respectfully disagree. This thing looks dope and quite menacing. I wouldn’t want to be on the receiving end of that thing.
Someone needs to make a fallout 4 gauss rifle that uses this system and maybe the longer you rev the trigger the more flywheels activate so it’s kinda like the actual in game gun
The trouble potentially is the amount of current draw that even the MOSFET might not be able to handle. This was really what might generously be called a proof of concept
Thanks for watching and thank you Chris for letting me showcase your blaster.
Been working on another long Build video that is taking some time to edit, figured I would take a break and working on something smaller in time of Ragnarocktoberfest.
If you enjoy the Loadout series, my Tutorial/Build videos or my edited Gameplay please consider supporting me on Patreon.
www.patreon.com/maketestbattle
You need to add more cuts during the dialogue
No one considers fun when winning a Nerf war, but this does put a smile on my face
The trick is to have each stage faster than the previous one, otherwise you're wasting the stages.
Thus is the cleanest jank blaster ever. He even painted it clear.
Coop refrence?
Either way it's awesome
Yes😎.
Nice coop joke 👍
*TACTICOOL CLEAR DOODBRU*
@@JordanBolland “Painted” 😂😂
I was just saying the other day "is mtb dead?". Nah, they were just waiting for the snap to bring them back
Quiet you! When when you coming to the next Melb Nerf or Wasteland Wars?
@@MakeTestBattle haha one day! TBA at the moment.
Now this is an avengers level threat
That thing looks like a railgun
Yup
halo railgun
FRAMEDMONSTER56 no, a partical accelerator
@@electrohalo8798 a nerf dart accelerator
It is the nerf equivelenit of a rail gun
"Held together with jank and love."
Like a nerf gauss rifle. Unfortunately he should have used honey badgers and he would be getting 300 or more.
Also waffle head darts, I would imagine. I'm not really a Nerf expert, but I hear they increase accuracy and range quite a bit
True watch coop772 vid he showed the grouping of the darts and waffle heads had smaller grouping than elite darts
Waffles play really nicely with flywheels too.
Interestingly there did seem to be a difference even in the colour of waffle. The readings in the video were blue waffles, using peach coloured waffles got about 20fps less on average. Granted, the peach ones were older so they may have just been a little more worn out.
Also, got lower fps with elites which was interesting
@@miniops12 it increases accuracy but decreases range
I think multi stage flywheels are cool, but I think the 6 sets are actually decreasing performance and holding the darts back. Didn't the Stanford student on outofdarts have a 3 stage rayven that shot elites at 230 fps?
The problem is that all the stages are rhinos or krakens, which turn at 33k rpm, meaning that the edges of the flywheels (which look like worker wheels to me) are turning at around, unsurprisingly, 195 fps. If the last few stages were swapped out with honeybadgers this thing could probably get into the high 200's, maaaybe 300.
The Stanford student had a 3 stage BRUSHLESS setup in his rayven. Still, a single ultracage could get around 230 with its high crush flywheels.
This was my thinking. Honestly, I'm not sure that any but the last flywheel pair is really doing any work. I'm wondering if a multi-wheel system could help with dart damage, by accelerating the dart in stages, with each pair running at a lower rpm than the next, throwing the dart forward into the next stage. Potentially that could prevent the final stage from ripping the head clean off. But you are still only getting your final velocity from the final stage, the prior stages are just to slowly accelerate the projectile. You could probably also use some gearing to get even higher final stage rpms, and since the dart is already moving quickly, you might be able to get away with minimal torque.
You can get constant full auto 170 whit just one cage well mantained is so dissapointing, and yes a less torque more speed Will make the darts go faster but even whit that i don't think that it will get over 250 more than 2 is actually overkill unless You know how to "Gauss cannon" velocities and is not that simple as "faster in the front" "slower in the back" yeah you will get consistency but not extra speed
You mean *the*eli Wu?
This blaster is going to snap everyone out of existence
Well, 50% of the population, anyways.
I did not see the endgame joke coming XD
Dread it, run from it, thanos joke arrives all the same
I love the absolute madness behind this
Don’t know if anyone still watches this video but I find it funny that six cages reach 180 fps and a 2 stage banned blaster cage can blow that out of the water at 300 fps. Great build and vid though
I like bullpup blasters. I like the Marvel Cinematic Universe. This pleases me on a deep level
This is that primo modding
Finally someone had the idea to make multiple flywheel cages
were any of the darts fired even useable after that beast shrekked them? lol Love ya, chris xD
Surprisingly not too bad. It is stock crush after all, though there's like foam buildup just on the first and last stages
@@panda.monium I would guess that is because the middle stages are all the same RPM and therefore only make modest increases in the speed of the dart.The first stage gets foam build up becaise it accelerates the dart from a stand still and the last stage gets foam build up because has slightly higher RPM and therefore makes a greater increase in the dart speed. ... great work BTW.
This definitely fits my definition of a yeet canon
Saw this at Ragnarocktoberfest and it's even more impressive in person. It's a solid chunky blaster!
That thing is awesome.
-Rob
Even though it's a swarm of nasty flywheel bees. :P
Add the hyperfire’s belt bullet feeding system and make this thing an absolute beast
I seen some early making shots of this on facebook. Preforms as expected maximum dart speed has been reached by the first/ second set of motors.
Time to add a brushless cage with a 5-6s battery!
So Make.Test.Battle have finally stopped watching Kicking Mustang vids long enough to put out this!
My dudes!!!!!!!
I totally thought you guys had quit!!!
Glad to see you BOIs baCCCCC!!!!!!
I know what the mod of the week is gonna be for this week in nerf
Amazingly finished!! Well played
I like the idea, still it works so even better.
Now THIS is Nerf modding!
The 4 dislikes are from the kids who got shot by it XD
This is brilliant.
This inspires me to upload my own 3d printed nerf gun videos.
Good to see some content again!
*REALITY CAN BE WHATEVER I WANT*
When you’re an engineering wizard and get bored
More like when a bored Doctor has a crack at engineering.
I love that this exists
You know the way that blaster is held it reminds me of the weapon the heavy trooper in star wars battlefront 2 (on PS2) would use.
This is the power of infinite rotation.
That’s a lot of power required
Car battery coming right up
"there's none such thing as a perfect flywheel blas-"
What solenoid did you use for the pusher? Were you the one that made the flywheel deploy?
time to make a blaster with 12 flywheel cages
because why tf not
So what you have built.. is a Flywheel Railgun.
What if you put a Nexus Pro Shot Through the six flywheels for an afterburner
You essentially made a Nerf railgun 0__0 ... Awesome
Thanks for doing this, so i dont have to.
Didnt get to see any accuracy tests tho.
So what you're saying is that, to achieve a Rival Railgun, we need a series of cages like this?
You and Tesla would have had a good time hanging out lol
Each consecutive flywheel needs to be faster than the last so that it acts like gearing on a car but that way it would should faster
Was just about to comment this - they could push it a lot further by tuning the speeds of each motor!
The first thing I though when people were talking about barrels affecting fps was just put flywheels
The dude actually did it
Not even Superman could stop the power of the KryptoNerf darts
You guys are based in Melb?? I’m working on your stryfe guide so maybe when I’m done I can come to a war
OMG this is soooo EPIC!!!
I remember building something like this in road to grambys
Well, color me impressed!
havent been nerf modding for about a year came back to this.
As you can see, infinity blaster doesn't have a nerf tacti-cool rail, barrel or stock attachment points.
This Would be Rad with Mega Darts. Lol
It looks hilariously fun and completely impractical which is what makes it so great.! MrScott54, BionicBlasters 😉😃😁😇🤓😎🤠
This mod was…inevitable
The two people that disliked this vid were probably the people that got hit by that gun.
As an Australian... this is a Nerf wet dream basically. Thanks.
Is this the true meaning of life?
"In order to save Life, one must be willing to tag it with a dart."
@@MakeTestBattle in order to save life, one must take it by the flywheel
Make a barrel attachment that has fly wheels in it
Accurate level : stormtrooper
Best flywheel blaster,
Wouldn’t any after 2 slow it down as it’s just creating friction
not sure they'd slow it down but they're likely not having any effect - if he ramped up the speed of each motor so they faster towards the end then they'd all be effective
Now just think if you could make the flywheels “spin” the dart like a football. Then use accustrike darts which are more accurate.
Accustrike darts are worse than waffle darts, and preform worse in flywheelers
I’m no electrical or mechanical engineer , so...
Not any better than one flywheel set ?
All he's missing now is purple skin and a gold tank top
But this blaster isn't balanced...as all things should be.
That's totally not unnecessary...
That's totally not amazing.....
Some might say that 5 afterburners might be overkill. I respectfully disagree. This thing looks dope and quite menacing. I wouldn’t want to be on the receiving end of that thing.
If it was painted it would be a tactical mailbox
I saw this today its glorious and I didnt even make the stones connection!!!
Now, just to make it dump 12 rounders in 4 seconds 😂
It need more fly wheels
Has all motors the same rpm?
use wafflehead darts they are more stable.
It’ll probably rip the fkn heads off😂
It shoots the speed of my paintball gun ... I think I need to switch hobbies.
It's all fun and games until someone busts out the mailbox extendo
Imagine a 10 fly wheel cages, OR 20 OR 100
ah yes, a literal nerf railgun
You need to make it with a bldc motor a big battery
Ah yes, how to make a nerf gun more dangerous than live ammo.
looks almost like the Gauss rifle from fallout 4.
Thanos has snapped on your nerf gun
An MTB video?!?!?
Shhh, tell no one.
This look sooo much like a railgun
Someone needs to make a fallout 4 gauss rifle that uses this system and maybe the longer you rev the trigger the more flywheels activate so it’s kinda like the actual in game gun
Call this RailDart
should've had them all at slightly different angles so it spins
probably spins
wouldnt that need many lipos?
How much rpm
I could get the same fps from a 2 stage modulus. But I wouldn’t have infinity stones
My God...
"BRING ME THANOS.!!!!!!!!!!"
Imagine if he swapped all those motors to neo-hellcat 180, 300fps might not be that hard to reach.
The trouble potentially is the amount of current draw that even the MOSFET might not be able to handle. This was really what might generously be called a proof of concept
At that point just make an air cannon 😂🤣😂
R.I.P thanos 2019 - 2019
Galaxy Quest.
looks like a railgun or a coilgun
the fact is that its not even THAT complecated so you can make one yourself
don't worry, he only shoots it once