How did you remove the baffles? Akra come with baffles installed and are non removable or are these the fake Chinese versions? Also have you had the CAT removed?
1. Remove the rivets and then cut the screw to remove the db killer and re-rivet. It’s a tough job. Or 2. Drill a hole in the bottom, through the screw and pull out. You can barely see the screw between the two gaps of the exit. If you look close in his video you can see the two cap off screws he put in the drilled hole. Do not miss that screw you are drilling for and titanium requires special bits for a clean job.
That plate support, awefull
I was one of the first to to put the akropovic on my 950 and that’s not even close.
How did you remove the baffles? Akra come with baffles installed and are non removable or are these the fake Chinese versions? Also have you had the CAT removed?
Please post a video to show how you remove the db killer.
1. Remove the rivets and then cut the screw to remove the db killer and re-rivet. It’s a tough job.
Or
2. Drill a hole in the bottom, through the screw and pull out. You can barely see the screw between the two gaps of the exit. If you look close in his video you can see the two cap off screws he put in the drilled hole. Do not miss that screw you are drilling for and titanium requires special bits for a clean job.
where can i find those frame sliders??
How is your shifter on the righthand side?
its not shifter, look closer it is a rear brake lol
Cool.. 👍🏻👍🏻
Why are all the exhausts for this bike so damn quiet!?
My LeoVince is not very quiet tho, even with the DB killers in..
What brake fluid are you using?
Active BF4 brake fluid
@@oatjongutsah thanks
How did you remove? Tia.
Use a drill to drill under the end of the exhaust pipe. Inside there is a nut to tighten to remove the DB killer.
@@oatjongutsah oh i see. Thank you so much. Ride safe. 🙏🏼
@@oatjongutsah what size bit did you use to finish the hole?
Same original sound. . . .
Even with the db killer it's a big difference in reality