Yeahhhh JATO ON THE FRIDGE KID! 😂 i love my Jato its one of the few nitros ill never sell! Yours is sick brother awesome!🤘 mines bone stock with only 1 tank run through her got her brand new late this past year!👍
Hey buddy hope doing well! Yeah they don't handle that great but it's fun little rc to bring to the parking lot had it for some time now don't run it alot my favorite nitro is my 4.0 truggy! Thanks for watching!🙏
Thanks I just got lrp.28 coming I seen your video on yours sucks they don't make a case for it mise well buy new one and just use the parts as back ups
@@jerseyjasongasrc2576 That was my idea but the .28 is out of stock at lrp.cc and way more expensive everywhere else. I ordered an sh28 8p wich i belive is the same engine, so i will install my lrp parts in the sh and use the stock parts as back up 👍
Hell yeah bubba.. Let er RIP tater chip!! Lol 😂 She sounds nasty RPMs I also own the protek ignitor. Works well no issues. Try an OS P3 turbo plug if you have issues with it not ideling well
@@jerseyjasongasrc2576 hell yeah those are also good plugs too... sucks you got ripped off with the carburetor but oh well it’s life. It happens. We all get ripped off eventually with something lol. But good thing you didn’t pay much for it.. no worries bro.. keep rippin! And take it easy my friend
It seems be hard keep this one straight I need figure out how to zero out the rear toe I will bring it when I come also I'll bring gallon of track bit for ya again
That little engines nasty rpms I don't care see what any one says about the moddified engines aren't worth it show me a stock 3.3 that sounds like that!
Def fun little car! I got the drive train bullet proofed and got aluminum hotracein gears and diff! I also have a buku clutch that def helped as well its rb mods with rcr crank with turbo head
i never had no problems with my jato steering and mine was setup how they have the drag slash now back then i sent off my 3.3 to be drag ported and port matched with a boat pipe when i got it back i tested spur gear and pinion combos until i got it rite then adjusted my trans shift point until i got it rite that mf was super bad i had foam rears and bandit front tires way back then
Engine sounds good but power is nothing if you can't control it it's all over the place get rid of those foams they're spinning too much overreving that engine it won't last long
Those dynamite ones are terrible the one you using is simular to my one i have the mcdaniel glow stick igniter very simular to yours since then its made the hobby alot easier
That wheelie bar goes connected to the differential when you pick it up from there it puts pressure away from the differential it stretches the casing with the screws
@@jerseyjasongasrc2576 it won't happen right away it's after time you never pick up a car where it gets his power from. That's why it comes with a handle
I can't stand turbo plugs number one you can't get them cheaper than $14 over here in Florida for a stupid plug there's nothing wrong with the regular one
Awesome jato 👍
Gotta be the nicest and fastest jato I’ve seen wow love that sound of the engine screaming it’s nuts off
Thanks for watching 🙏
Yeahhhh JATO ON THE FRIDGE KID! 😂 i love my Jato its one of the few nitros ill never sell! Yours is sick brother awesome!🤘 mines bone stock with only 1 tank run through her got her brand new late this past year!👍
Hey buddy hope doing well! Yeah they don't handle that great but it's fun little rc to bring to the parking lot had it for some time now don't run it alot my favorite nitro is my 4.0 truggy! Thanks for watching!🙏
Looking good keep getting it don't let em steal your joy
That thing is quick mate! By the looks you've added some quality parts to it to give it its performance. Nice rig!
Bad ass Jato! 💪💪 Can't belive is a 3.3 💥
Thanks I just got lrp.28 coming I seen your video on yours sucks they don't make a case for it mise well buy new one and just use the parts as back ups
@@jerseyjasongasrc2576 That was my idea but the .28 is out of stock at lrp.cc and way more expensive everywhere else. I ordered an sh28 8p wich i belive is the same engine, so i will install my lrp parts in the sh and use the stock parts as back up 👍
Ok amain hobbies has them not sure if you can ship from there but seems your right should be fine with sh block
beauthifull parts nice car
I love the hot shot ignitor 💪
Nice I have one to trying to add some mods myself
Love that wheelie bar!! Know where I can get one?
RLC I believe makes it
Hell yeah bubba.. Let er RIP tater chip!! Lol 😂 She sounds nasty RPMs I also own the protek ignitor. Works well no issues. Try an OS P3 turbo plug if you have issues with it not ideling well
What up buddy been a while I got #4 sh and runs much better I'm also gonna start going bit hotter on my novarossi as well maybe #4 or 5
The tune was erratic cause the high speed housing has air leak go ripped off by some guy who sold in on ebay
@@jerseyjasongasrc2576 hell yeah those are also good plugs too... sucks you got ripped off with the carburetor but oh well it’s life. It happens. We all get ripped off eventually with something lol. But good thing you didn’t pay much for it.. no worries bro.. keep rippin! And take it easy my friend
Nice jato!! I couldn't get my steering right until I finally got the setup station from hudy it has to be extremely even for speed runs or drag racing
I agree it's not easy to setup with just gauge
Do you notice decreased runtime with that pipe/manifold combo??
Hey man where did you buy the front wheels?
What shocks are those and do u have a link to where i can run jaco foams up front possible nice car man
They make foams for the stock Jato they don't have the hex they take bearings
What is your gear combo?? spur/clutchbell??
So do order the modded parts, or do you send them the engine to modify???
@@darrincelendano2676 send them the engine! I have crank I'm gonna sell from rb mods if you were looking for a moddified crank
Nice you have to bring it to philly.
It seems be hard keep this one straight I need figure out how to zero out the rear toe I will bring it when I come also I'll bring gallon of track bit for ya again
Sell me that wheelie bar!!
Do they make re enforced A arms and axles? The aluminun parts you added just for looks or make a difference ?
Very nice what wheelie bar is that
Rlc
@@jerseyjasongasrc2576
Gotta a link?
What’s up bro got a revo with the os engine where did you get bike clutch looking for something better than stock thanx bro
Buku
Yes buku much better then the stock stuff
Where did you get? Thank you
Hey Jason where'd you get that wheelie bar for the JATO
Forget the company that makes it rsr or somthing like that got from eBay I believe
That little engines nasty rpms I don't care see what any one says about the moddified engines aren't worth it show me a stock 3.3 that sounds like that!
@@jerseyjasongasrc2576 cool cuz I'm going to be looking... You'll see stay tuned LOL
@@jerseyjasongasrc2576 that thing is badass don't know if you seen it yet or not but I actually pointed it out in my most recent vid
Def fun little car! I got the drive train bullet proofed and got aluminum hotracein gears and diff! I also have a buku clutch that def helped as well its rb mods with rcr crank with turbo head
Hey man what bump box are you using
@@jamescollins4617 duratrax but I turned the wheel to be vertical
i just got a jato a week ago. what wheels/tires are you using in the rear, and how did you convert the front bearing to hex hub?
Hot racing makes 17mm conversion rear wheels are Jaco foams
Thanks for checking out the video hope you enjoy your jato fun little cars
@@jerseyjasongasrc2576 thank you for the info! this jato has been a lot of fun for sure.
What hex adapter you used on the jato????
Can you teach us the mod you used???
Hot racing! Adpters
What nods would want to see?
i never had no problems with my jato steering and mine was setup how they have the drag slash now back then i sent off my 3.3 to be drag ported and port matched with a boat pipe when i got it back i tested spur gear and pinion combos until i got it rite then adjusted my trans shift point until i got it rite that mf was super bad i had foam rears and bandit front tires way back then
Engine sounds good but power is nothing if you can't control it it's all over the place get rid of those foams they're spinning too much overreving that engine it won't last long
What carb is it your running mate
Losi 3.4 but it's cracked need get another one why running wierd but good carb other wise great idle!
Those dynamite ones are terrible the one you using is simular to my one i have the mcdaniel glow stick igniter very simular to yours since then its made the hobby alot easier
Remember guys don't ever grab your car by the wheelie bar
?
That wheelie bar goes connected to the differential when you pick it up from there it puts pressure away from the differential it stretches the casing with the screws
Ok mine has dif screws in it so I don't have that issue
@@jerseyjasongasrc2576 it won't happen right away it's after time you never pick up a car where it gets his power from. That's why it comes with a handle
What spur gear is that
Hot racing and Robinson racing g spur not sure size
Novarosi novarasi
I can't stand turbo plugs number one you can't get them cheaper than $14 over here in Florida for a stupid plug there's nothing wrong with the regular one
lean
Yes the carb has Crack in it if you see I mentioned in video I believe need get new 3.4 carb tha KS for watching
🗑