Thank you so much for visiting my channel! I hope you enjoyed video. Please leave any comment, question, advice in the comment. Any feed back is applicated it! And if you liked my video, make sure to hit "Like" or "Subscribe". Thank you again for your interest on my channel:) Kaz 00:00 | Introduction 00:25 | Opening Box 02:45 | Upper fuselage Assembly 03:49 | Cockpit Assembly 07:10 | Nose Landing Gear Assembly 09:13 | Air Intakes Assembly 10:26 | Rear landing gear bay painting 11:57 | Lower Fuselage Assembly 12:02 | Fuselage Assembly 12:23 | EOTS sensor Assembly 13:36 | Fuselage Paint Work 17:29 | Decal Work 18:55 | Engine Nozzle Build 20:31 | Landing gear build 20:52 | Ejection Seat, Pilot and Cockpit Build 25:17 | Canopy work 26:49 | Final Parts Assembly 31:10 | Final Show
Thank you so much for your comment!! Actually I failed several times in the past where I completely blocked the view of canopy 😆 I’m still very careful when painting it!
Thank you so much for your comment! It means a lot to me! as to 1/32 F18 or F14, I have not done that. every time I go tamiya shop, it looks GREAT but never had a chance to buy one.
BRAVO! Probably the best modeling "how to video I" have seen in months. What took longer, building the kit or editing this fantastic video?🏁 Kaz, when you have to fill fuselage seams on aircraft, what technique do you use? Do you have a video on this process?
Thank you so much for your comment and compliment! It means a lot to me, really appreciate. In terms of of seams filling, I use TAMIYA cement . Put a little more than usual and press them. Then materials melt together. I do not have much but see link below. If the gap is really big, I would use putty to fill them. After applying surfacer, use sand paper to erase seams. Then surfacer primer again. Repeat it until the seam is gone. I hope it answers your question. Please let me know if you could give you more clarification, thanks! 11min 24sec of this video ua-cam.com/video/5r4o3whD5mE/v-deo.htmlsi=lKdbyjcP603qTwY7#t=11m24s 23min 47sec ua-cam.com/video/fglfZ8-yScU/v-deo.htmlsi=pWm_p-YiVRqgoA7C#t=23m47s
Hello~ what a great work! I would like to ask if I want to make this kit into a flight state with all the landing gear retracted. Is there any way to do it? I don't know how to deal with the four latches in the opening of the nose landing gear storage compartment.
Hello thank you so much for your comment! Yes you can choose flight mode with all of landing gear retracted. There are several parts prepared for with/without landing gear or sometimes different parts prepared. I hope those answered your questions. Please let me know if you have any questions, thanks!
Thank you so much for visiting my channel! I hope you enjoyed video. Please leave any comment, question, advice in the comment. Any feed back is applicated it! And if you liked my video, make sure to hit "Like" or "Subscribe". Thank you again for your interest on my channel:) Kaz
00:00 | Introduction
00:25 | Opening Box
02:45 | Upper fuselage Assembly
03:49 | Cockpit Assembly
07:10 | Nose Landing Gear Assembly
09:13 | Air Intakes Assembly
10:26 | Rear landing gear bay painting
11:57 | Lower Fuselage Assembly
12:02 | Fuselage Assembly
12:23 | EOTS sensor Assembly
13:36 | Fuselage Paint Work
17:29 | Decal Work
18:55 | Engine Nozzle Build
20:31 | Landing gear build
20:52 | Ejection Seat, Pilot and Cockpit Build
25:17 | Canopy work
26:49 | Final Parts Assembly
31:10 | Final Show
かっこいい
コメントありがとうございます!嬉しいお言葉です。
Brilliant. Shes a real beauty 👌🏻👍🏻👏🏻
Thank you "always" for your comment! I really appreciated it. It encourage me to create another video : )
Wonderful model and excellent video. I dont think i could add gold paint to my clear part though, that took nerves!
Thank you so much for your comment!! Actually I failed several times in the past where I completely blocked the view of canopy 😆 I’m still very careful when painting it!
This is next on my bench after the leopard 2a6 for Ukraine and also did the preorder for the tamiya F35B
Thank you for your comment! Yes TAMIYA F35B is very attractive for me too!
@@platoki I plan on building them all
You could try Vallejo paints thinned with water + wet palette for your brush painting details, see "Duncan Rhodes" or similar figure painters.
Thank you for your comment! Also appreciated for your tips I will try next time👍
❤❤😊😊 very nice jet impressive. Love the F-35A Lightning 2 my fave jet.
Thank you so much for your comment and compliment! Yes F35 is my favorite jet too. I saw F35B vertical hovering and landing this year. It was surreal!
Cool 👍
Thank you so much for your comment! :)
Very nice build, however, use color pencils fpr tinting windows and canopies. The result will surprise you…
Thank you so much for your comment! Really appreciated it. Thank you also for the tips. I will try next time…
Love your work. I'm so jealous.
Have you looked at building the 1/32 f18 or f14 tomcat?
Thank you so much for your comment! It means a lot to me! as to 1/32 F18 or F14, I have not done that. every time I go tamiya shop, it looks GREAT but never had a chance to buy one.
@platoki Hopefully, soon you'll get your chance.
@ROBERT-ik4ht as soon as I get a chance, I will make a video👍
BRAVO! Probably the best modeling "how to video I" have seen in months. What took longer, building the kit or editing this fantastic video?🏁 Kaz, when you have to fill fuselage seams on aircraft, what technique do you use? Do you have a video on this process?
Thank you so much for your comment and compliment! It means a lot to me, really appreciate. In terms of of seams filling, I use TAMIYA cement . Put a little more than usual and press them. Then materials melt together. I do not have much but see link below. If the gap is really big, I would use putty to fill them. After applying surfacer, use sand paper to erase seams. Then surfacer primer again. Repeat it until the seam is gone. I hope it answers your question. Please let me know if you could give you more clarification, thanks!
11min 24sec of this video
ua-cam.com/video/5r4o3whD5mE/v-deo.htmlsi=lKdbyjcP603qTwY7#t=11m24s
23min 47sec
ua-cam.com/video/fglfZ8-yScU/v-deo.htmlsi=pWm_p-YiVRqgoA7C#t=23m47s
If I were an officer, I would put in to fly an f35.
yes my favorite fighter jet is F35, I love the shape technology and combat capability.
repect! 1/48 F22 plz :)
Thank you for your comment. F22 is also in my radar!
Hello~ what a great work! I would like to ask if I want to make this kit into a flight state with all the landing gear retracted. Is there any way to do it? I don't know how to deal with the four latches in the opening of the nose landing gear storage compartment.
Hello thank you so much for your comment! Yes you can choose flight mode with all of landing gear retracted. There are several parts prepared for with/without landing gear or sometimes different parts prepared. I hope those answered your questions. Please let me know if you have any questions, thanks!
@@platoki Thank you for answering so much, I'll take a look to my kit later when I have time and hope I can make it~