Guys please check my channel to watch more videos about how to make fishing lure with 3d printer, Thank you. ua-cam.com/channels/zPfB6-eK2iqqA5fsF1MbCQ.html
I don't have a 3D printer, but I do make wooden lures. What I like about your channel is that you share, not just knowledge, but also the means to make lures. That's why I watch and "Like" many of your videos. Keep up the good work.
Thank you very much for your support!!! 👍👍😀😀 Yes, the main reason I started this channel is to share my lures with other peolpe. And I think they are easy to make everybody can make them. I hope people who watched my video can start to make them and catching fish on them.
Great video, thanks for sharing. I don't know if there are specific tools available for the wire twisting and production of lure parts but it would be great if someone could develop lure tools such as this to make 3d lures easy for individuals to make their own lures. Thanks again.
Hi, an incredible job appears to me, for my taste they are a bit big, but the weight transfer, the magnets and the final result is incredible, keep it up, I love it!
Nice work and thx for sharing your Stuff. Just an idea , maybe you show a short clip in the end of how they work in the water.I would love it. Greatings from Germany
Point is that he make wright size lure with great shape. That is what fisherman's are liking for. Which is almost impossible to find. They are about 7 inches. He is young, but smart gay. Whit that ages he know what is right. He didn't care about other "fisherman " say. This boy going wright way. He is Profesional for those "professionals". Good luck body !
Thank you very much. Flood was long time ago. I am very good now. I am little busy about other things in my life this year I didn't go fishing at all this year so far. I will make more content in the future when my life gets better. Thank you!!
I’m doing similar work. Probably not going to create a UA-cam channel. You have a very clever way of locking in the twisted wire using tag ends. Those who build lures will see and know, but for those not into lure making you should slow down and talk about how those tag ends going into the hole add considerable strength. For me, the toughest part was learning fusion 360 enough to even get started. That’s prerequisite to what you’re doing here and people probably would like to see. I know I personally would like to see how you get such clean internal structures. I design one side using offset profiles lofted to generate solid then I shell it then fill center stuff then mirror at the end to get 2nd side. Nice video!
Hi, Thank you for your suggestion. Because I just started making video not long ago. So I am trying different ways to present information please check my other videos they got close-up still shots, thank you!!
Hello! I'm from Chile, and I'd like to know if you can make a trolling fishing lure for me. I need one that dives to a depth of 5 meters and another one that dives to a depth of 9 meters. We do kayak fishing, so it would be great to have these lures.
@@3DPrintedAngler i mean, a lure strong enough to fish it with heavy spinnings rods(tuna ,gt, theres a lot of people who will be intereseted) like a sink stick bait , just an idea, also your popper looks good im gona print 3 models you upload but looking to can use it with popping rods
@@quaigonying9454 that popper is heavy duty. You can catch tuna on it. I am not mean 100 200 300 pound bluefin.. I don't think there's any problems if you catch under 50 60 pound I guess. And this minnow lure should work fine with tuna too. Yellowfin blackfin.
Thank you very much!!! Yes, I use epoxy to coat lure. Please check my other lure making video this video explained everything very well ua-cam.com/video/0rh6lyB3j4o/v-deo.html Because last lure making video I made too detailed I guess. Many people don't have the patient to watch it people close the video very soon. So I made this video shorter. I guess I have to add little more explanation in my next video. Thank you very much for your suggestion!!!👍😋
Hey mate, cheers for the video, it was well edited and filmed, and the fish lures come out great. Do you have a lure design for something 1/2 to 1/3 the size of the original design? Cheers again mate
Hi, thank you. Sorry, I dont have it right now..you want to use it for freshwater fishing? I'm going to make some freshwater lure in my future videos. So, maybe in the future I will make a smaller one.😀
@@3DPrintedAngler Yes you are right I had to uninstall the latest verdion of cura and reinstall and now it works fine, Thankyou for your quick reply, it is printing now:)
You all but begged for our comments, so here are mine. (I'm a longtime saltwater fisherman and amateur lure-maker.) 1. I'm quite sure this is meant to be a "how-to" video. But NOBODY can learn about what you're doing when you speed up the "tape" until it's almost a blur! This was particularly bad when you were fabricating and installing the hook eyes. I even used the UA-cam utility to slow the playback to .5, but that wasn't enough! 2. You show us your procedure for applying three coats of clear finish, but you don't tell us WHAT coating you chose and why. In fact, you hardly talk at all during this process. 3. I think the main focus of this video was supposed to be your weight-transfer system. But you didn't explain why you chose this particular configuration-a horizontal tube, three bearings, and a rare-earth magnet mounted off to the side, at one end of the weight tube. There are many, many ways to accomplish this weight-shift goal, but you don't say anything about why your system is better than the others. 4. You didn't show us a water test of these lures after they were completed! You left us guessing about how they swim when retrieved AND about how well your weight-transfer design worked during each cast. I'm sorry if I seem so critical. I wouldn't have written these comments if you hadn't asked. Most important, I believe this video COULD have been a really valuable, useful one. But-for me-it fell way short because of the lack of detail and the absence of a water test.
Hi, thank you very much for this very detailed comment. Because this is one of my very early video so I was not experienced about making video. Some of the problems you mentioned I was kind improved in my other videos afther this one. If you like you can watch my other videos. And about water testing of this lure you can find footage clip in my first fishing video. If you want to see you can go watch it. Thank you, I will take your suggestions and improve my future videos.
Guys please check my channel to watch more videos about how to make fishing lure with 3d printer, Thank you.
ua-cam.com/channels/zPfB6-eK2iqqA5fsF1MbCQ.html
I think it would be great if you can show how your lures act in the water
I don't have a 3D printer, but I do make wooden lures. What I like about your channel is that you share, not just knowledge, but also the means to make lures. That's why I watch and "Like" many of your videos. Keep up the good work.
Thank you very much for your support!!!
👍👍😀😀
Yes, the main reason I started this channel is to share my lures with other peolpe. And I think they are easy to make everybody can make them. I hope people who watched my video can start to make them and catching fish on them.
Great video, thanks for sharing. I don't know if there are specific tools available for the wire twisting and production of lure parts but it would be great if someone could develop lure tools such as this to make 3d lures easy for individuals to make their own lures. Thanks again.
Thank you
Hi, an incredible job appears to me, for my taste they are a bit big, but the weight transfer, the magnets and the final result is incredible, keep it up, I love it!
Thank you. Glad you like it. ☺️
Wow great video... Tanks man
Thank you.
Hello my dear friend Alex how have you been I hope you are doing well a big hugs for you
Hi, I am really good thank you!!
Eres un Crack, te has ganado un suscriptor.
Muchas gracias.
Nice video bro.
Thanks
Hola, muy buen video, para el caso de los imanes que utilizas bolas de acero para que se peguen al imán en lugar de ponerle plomos no?
Love your video can you make an 8" or 9" shad if you can I want 5 of them
Thank you.
Awesome lures man. I’m just starting 3d printing and you have by far the best videos and lures!!!
Thank you.
Nice work and thx for sharing your Stuff. Just an idea , maybe you show a short clip in the end of how they work in the water.I would love it. Greatings from Germany
Hi, Thank you very much. I will add short clip in the future video. Thank you.
Point is that he make wright size lure with great shape. That is what fisherman's are liking for. Which is almost impossible to find. They are about 7 inches. He is young, but smart gay. Whit that ages he know what is right. He didn't care about other "fisherman " say. This boy going wright way. He is Profesional for those "professionals". Good luck body !
Thank you.
Hope to start again and youre over the flood. Loving your content!
Thank you very much. Flood was long time ago. I am very good now. I am little busy about other things in my life this year I didn't go fishing at all this year so far. I will make more content in the future when my life gets better. Thank you!!
I am glad you let people copy your work.
Yeah, I want people can get benefit from my work.
I’m doing similar work. Probably not going to create a UA-cam channel. You have a very clever way of locking in the twisted wire using tag ends. Those who build lures will see and know, but for those not into lure making you should slow down and talk about how those tag ends going into the hole add considerable strength. For me, the toughest part was learning fusion 360 enough to even get started. That’s prerequisite to what you’re doing here and people probably would like to see. I know I personally would like to see how you get such clean internal structures. I design one side using offset profiles lofted to generate solid then I shell it then fill center stuff then mirror at the end to get 2nd side. Nice video!
Thank you, glad you like it.
Looks great
They should well
Thank you
Looks great I just have one question what software did you make it in?
Edit: for every one who doesn’t know he made it in, fusion 360.
Lol, guess you find out yourself.
Nice video! I personally like fast speed through videos like this, but close-up still shots of each part would make it better!
Hi, Thank you for your suggestion. Because I just started making video not long ago. So I am trying different ways to present information please check my other videos they got close-up still shots, thank you!!
Great design, I am looking forward to trying them
Have fun!
Makes me wanna try it my self :)
You should try.
Nice design mate. What type of brand of epoxy are you using?
Thank you. You can find everything I used in this video in the description section. Thank you.
Hello! I'm from Chile, and I'd like to know if you can make a trolling fishing lure for me. I need one that dives to a depth of 5 meters and another one that dives to a depth of 9 meters. We do kayak fishing, so it would be great to have these lures.
Hi, I am not doing it right now...maybe in the future.
Can we see the swimming action?
You can find action in my first fishing video.
Good job , congratulations 👍
Thank you!
great video. thanks for sharing!
Thanks for watching!😋
Cuanto $$$dinero americano
$25
Well done I was very impressed, and subscribed to your channel.
Thank you! Glad you like my content.
Your channel is awesone, you must made some lure for tuna man!
Yeah, I want to fish tuna. But never get any chance. And if I make tuna lure.. there is no place I can test it..
@@3DPrintedAngler i mean, a lure strong enough to fish it with heavy spinnings rods(tuna ,gt, theres a lot of people who will be intereseted) like a sink stick bait , just an idea, also your popper looks good im gona print 3 models you upload but looking to can use it with popping rods
@@quaigonying9454 that popper is heavy duty. You can catch tuna on it. I am not mean 100 200 300 pound bluefin.. I don't think there's any problems if you catch under 50 60 pound I guess. And this minnow lure should work fine with tuna too. Yellowfin blackfin.
And of course I will make more lures. Different kind. Saltwater freshwater big small.
@@3DPrintedAngler ill be here to see your work and print it, thanks alex
Great video, you just need to explain what you are doing. Did you cover the lures with epoxy and later CA glue?
Thank you very much!!! Yes, I use epoxy to coat lure.
Please check my other lure making video this video explained everything very well ua-cam.com/video/0rh6lyB3j4o/v-deo.html
Because last lure making video I made too detailed I guess. Many people don't have the patient to watch it people close the video very soon.
So I made this video shorter.
I guess I have to add little more explanation in my next video.
Thank you very much for your suggestion!!!👍😋
1 wire, not 3, preferably.
This design not really good with one wire.
döner standı nereden aldın
check my other video you will find it
@@3DPrintedAngler no with glass table where you display rapalas
Sorry I don't understand what you mean.
Hey mate, cheers for the video, it was well edited and filmed, and the fish lures come out great. Do you have a lure design for something 1/2 to 1/3 the size of the original design?
Cheers again mate
Hi, thank you.
Sorry, I dont have it right now..you want to use it for freshwater fishing? I'm going to make some freshwater lure in my future videos. So, maybe in the future I will make a smaller one.😀
@@3DPrintedAngler Absolute legend. I'll keep an eye on your channel and thingiverse page.
Sounds good!!☺️😆👍👌
Просто купи рыбу.
Hi Alex, can you tell me why my printer starts at the top instead of the bottom when I try to print your lures? Please.
I think because the way you slice it maybe wrong???
@@3DPrintedAngler Yes you are right I had to uninstall the latest verdion of cura and reinstall and now it works fine, Thankyou for your quick reply, it is printing now:)
Cool.👍
Which software do you use to draw the 3d model?
Fusion 360
@@3DPrintedAngler thank you 👍👍👍
Comment
Thanks.
You all but begged for our comments, so here are mine. (I'm a longtime saltwater fisherman and amateur lure-maker.)
1. I'm quite sure this is meant to be a "how-to" video. But NOBODY can learn about what you're doing when you speed up the "tape" until it's almost a blur! This was particularly bad when you were fabricating and installing the hook eyes. I even used the UA-cam utility to slow the playback to .5, but that wasn't enough!
2. You show us your procedure for applying three coats of clear finish, but you don't tell us WHAT coating you chose and why. In fact, you hardly talk at all during this process.
3. I think the main focus of this video was supposed to be your weight-transfer system. But you didn't explain why you chose this particular configuration-a horizontal tube, three bearings, and a rare-earth magnet mounted off to the side, at one end of the weight tube. There are many, many ways to accomplish this weight-shift goal, but you don't say anything about why your system is better than the others.
4. You didn't show us a water test of these lures after they were completed! You left us guessing about how they swim when retrieved AND about how well your weight-transfer design worked during each cast.
I'm sorry if I seem so critical. I wouldn't have written these comments if you hadn't asked. Most important, I believe this video COULD have been a really valuable, useful one. But-for me-it fell way short because of the lack of detail and the absence of a water test.
Hi, thank you very much for this very detailed comment. Because this is one of my very early video so I was not experienced about making video. Some of the problems you mentioned I was kind improved in my other videos afther this one. If you like you can watch my other videos. And about water testing of this lure you can find footage clip in my first fishing video. If you want to see you can go watch it. Thank you, I will take your suggestions and improve my future videos.