hello Mr. Hagojibi My name is Thanh, nice to meet you, i could like to ask you a question, when you use laser welding to work , when you're tacking on plate do you change parameter to tack it or you keep the same parameter set up before to do that, sorry mr. my question is silly, because i could like to know how laser machine ? thankyou
@god I am talking ABOUT YOU asserting that it is a good weld based on Standing on it. A metric that is not a Industry Standard. A cross section would be a good indication as the OP suppgested
Which type stainless steel were you welding? I am interested is seeing 5mm 316L stainless steel being laser welded. Also, what was the size, feed rate for 5mm stainless plate and type of the stainless steel weld wire? Good demonstration.
Its a lot for the hobbyist. But is nothing for industry/commercial applications. The eliminated need to pickle and clean welds alone will offer an instant ROI enough to justift the cost of a system even triple this cost. And stainless steel fabricators not having to spend forever straightening distorted structures following TIG welding will only add to it's value of this technology. IN a few years laser will likely be the ONLY cost effective way to weld.
GUAO QUE MUY LINDA DEMOSTRACION DE SOLDADURA AL LASER ME ENCUENTRO SUMAMENTE MUY INTERESADO EN ESTA SOLDADURA YA QUE ES EL NUEVO FUTURO Y LE AGRASEZCO MUCHO DE SU LINDO VIDEO EN GRANDE CALIDAD Y MUY FACIL USO DE ESTA MAQUINA DE SOLDAR DIOS SE LO PAGUE POR SU MUY LINDA DEMOSTRACION CHAO
The settings used enable same weld speed rate for each example. really very nice and stainless/carbon steel same fill wire same result high quality easy set-up.
What beautiful machines and what delicate work can be done with them. It's a pity that here in Mexico such a machine costs the same as a Toyota Corolla, due to taxes and import duties.
I saw another video and they showed good penetration with all of the welds. It was a different machine , LIGHT WELDER it is a good machine but you pay for it.
Probably not needed since the laser and decompose O2 and vaporize any oxide layer although it is probably not as effective as one might guess. It is possible to weld without gas but of course generally is not quality. So these examples may be a bit poor.
@god Looks can be deceiving. Certain applications will not allow even the most minute of issues since it can be very dangerous(e.g., piping that is carrying explosive material).
@god I'm saying that they may not be as good as traditional. Stomping on them is not a scientific test. They could be rather superficial welds and there is no way to tell from a video of someone stomping on the welds. If they were still warm they could have flex in them enabling them to more easily bend over without snapping. Maybe they did snap in some places. The point is the video doesn't prove anything except that it does weld. There *could* be a lot of technical problems with the weld though. It would have been better, if they are trying to prove the quality, by using more scientific tests.
This is what I found doing an online search. Price is about $10k - $15k depending upon laser power and manufacturer. Power requirement is 240vac connected to a 50 amp circuit similar to MIG, TIG & GMAW equipment. Max power draw is about 30 amps. Not mobile. The cabinet is about the same size as two small dormatory size refrigerators. Wire feeder is a separate unit about the same size as a MIG welder. Shielding gas is an added expense. Smaller wattage laser welders come with a smaller price tag and smaller physical size and smaller welding capabilities.
There is a reason why they don’t show you a cross section. That is not a fusion welding, that is a cold weld followed by a cold hardening, it will break.
You got the point it is bit suspicious video , i see a lot of limitation in this machine ..then the price is not effective considering the penetration limits . , i use pulse YAG welder on jewelry and on the white gold alloyed with nickel no matter how brain stressing different setups on machine the welds are brittle . hard to get penetration unless the small fraction of millimeter beam is set but if going to far with that it just simply blow deep holes and one have to fix it by feeling them ..sometime it is frustrating impatient action . It works great on high carat yellow golds , palladium alloyed white gold ( beside leaving porosity behind ..ha ha .. and absolutely great on platinum ... I use laser on jewelry for decades and can't imagine now to be in business without it this days . I use old school torch as well and laser mainly to talk parts together . ..about 50/50 both methods
Probably not because too much heat would build up and then cause failure. Probably be expensive to cool it down fast enough to enable it. They already have 3D metal printing though using lasers and metal powder.
РФ ДЕЛАЕТ ЛУЧШЕ ЛАЗЕРНЫЕ СВАРОЧНЫЕ АППАРАТЫ. ОНИ НАМНОГО МЕНЬШЕ, ЛЕГЧЕ, НЕ НУЖНО ДЕЛАТЬ НАСТРОЙКИ. В НАСТРОЙКАХ ПОДТВЕРЖДАЕШЬ КАКОЙ МЕТТАЛ И ВСЁ!!! ВЕС АППАРАТА 90 КГ.
What beautiful machines and what delicate work can be done with them. It's a pity that here in Mexico such a machine costs the same as a Toyota Corolla, due to taxes and import duties.
"Oh? I Love the tool. It makes clean cuts, and the finest welding is marvelous."
We have TIG, MIG, MAG and MMA. So what will this method be called in the future?
LIGMA - Laser Inert Gas Mison/Argon
А что с нагрузками?? Так то неплохо ... но не понятно есть провар метала или это просто плавка присадочного метала
Nice. Now show us the test coupons and the pass/fail for each and the specks for all the various certs this unit is capable of.
hello Mr. Hagojibi
My name is Thanh, nice to meet you, i could like to ask you a question, when you use laser welding to work , when you're tacking on plate do you change parameter to tack it or you keep the same parameter set up before to do that, sorry mr.
my question is silly, because i could like to know how laser machine ? thankyou
I'll take two... one for my shop and one for around the house
How strong are the welds ? Can we see some cross sections to judge penetration?
And how much ?
@god posted before I watched it all. Schoolboy error , sorry god.
@god Standing on something is not a test method, I did not see a cross section either!
Standing on a weld is not something you would see in the pipeline industry to judge "IT WORKS"
@god I am talking ABOUT YOU asserting that it is a good weld based on Standing on it. A metric that is not a Industry Standard.
A cross section would be a good indication as the OP suppgested
@god "What more do you need?" was your statement.
Your reply was anecdotal at best: "He stood on it"
Looks.Ike electric welding using a fancy hand piece.
Which type stainless steel were you welding?
I am interested is seeing 5mm 316L stainless steel being laser welded.
Also, what was the size, feed rate for 5mm stainless plate and type of the stainless steel weld wire?
Good demonstration.
$10,000 don’t think I will be getting one any time soon, amazing though
Its a lot for the hobbyist. But is nothing for industry/commercial applications. The eliminated need to pickle and clean welds alone will offer an instant ROI enough to justift the cost of a system even triple this cost. And stainless steel fabricators not having to spend forever straightening distorted structures following TIG welding will only add to it's value of this technology. IN a few years laser will likely be the ONLY cost effective way to weld.
Just $10,000 for that huge machine and feeder? Are you sure? The Desktop sized Lightwave is $25,000 and I think it’s 1,500 watts.
Certainly its not a machine for the man in the street:-((
No spatter removal either....Incredible
GUAO QUE MUY LINDA DEMOSTRACION DE SOLDADURA AL LASER ME ENCUENTRO SUMAMENTE MUY INTERESADO EN ESTA SOLDADURA YA QUE ES EL NUEVO FUTURO Y LE AGRASEZCO MUCHO DE SU LINDO VIDEO EN GRANDE CALIDAD Y MUY FACIL USO DE ESTA MAQUINA DE SOLDAR DIOS SE LO PAGUE POR SU MUY LINDA DEMOSTRACION CHAO
The settings used enable same weld speed rate for each example. really very nice and stainless/carbon steel same fill wire same result high quality easy set-up.
Hi, can you weld brass too?
How is the arc shielded from oxygen?
Will this cut titanium, and how thick?
I need one of these, where can i buy it?
Laser welding machine, I like very much, where i can buy
Will this weld body panels on vehicles?
Strength tests?
What beautiful machines and what delicate work can be done with them. It's a pity that here in Mexico such a machine costs the same as a Toyota Corolla, due to taxes and import duties.
Thank you, our machine has good price, you can leave your whatsapp so we can talk more, whatsapp +8615522821686
What is the price in india? And after service?
What shielding gas was used in this video ?
Would be interested to see the comparitive weld penetation and distorsion values compared to TIG/MIG/ARC
I saw another video and they showed good penetration with all of the welds. It was a different machine , LIGHT WELDER it is a good machine but you pay for it.
Penatration Is Not Good As
Tig Welders.
Est pour la découpe ,en veux voire.
Very amazing my friend 😊😅
Why not add an affiliate link? earn money and help viewers find it at the same time.
How much the price of that machine
We’re can i purchase one
These machines are great, but still way to expensive for small shops.
Salute to japanese technology
Patent for this invention is a must.
Is it not Chinese ?
How about welding Titanium?
Does the machine use a shielding gas feed ?
Probably not needed since the laser and decompose O2 and vaporize any oxide layer although it is probably not as effective as one might guess. It is possible to weld without gas but of course generally is not quality. So these examples may be a bit poor.
@god Looks can be deceiving. Certain applications will not allow even the most minute of issues since it can be very dangerous(e.g., piping that is carrying explosive material).
@god You clearly are not a professional welder. Standing on welds doesn't mean that they are quality. It doesn't mean that microfissures do not exist.
@god I'm saying that they may not be as good as traditional. Stomping on them is not a scientific test. They could be rather superficial welds and there is no way to tell from a video of someone stomping on the welds. If they were still warm they could have flex in them enabling them to more easily bend over without snapping. Maybe they did snap in some places. The point is the video doesn't prove anything except that it does weld. There *could* be a lot of technical problems with the weld though. It would have been better, if they are trying to prove the quality, by using more scientific tests.
muted.
You should have presets. Simply select the type of metal rather than having to enter in anything.
That would certainly be a big selling point while still allowing minor adjustments as needed. Metal type, metal thickness and bang, you're done!
Agree. Maybe thats coming in future updates. Manual/Auto mode
What is the power needed to weld thinner steel sections. Also is it mobile?. How about the cost figures.
This is what I found doing an online search. Price is about $10k - $15k depending upon laser power and manufacturer. Power requirement is 240vac connected to a 50 amp circuit similar to MIG, TIG & GMAW equipment. Max power draw is about 30 amps. Not mobile. The cabinet is about the same size as two small dormatory size refrigerators. Wire feeder is a separate unit about the same size as a MIG welder. Shielding gas is an added expense. Smaller wattage laser welders come with a smaller price tag and smaller physical size and smaller welding capabilities.
@@danburch9989 my thks.power in terms KW will help pl.
@@baburamabadhran1437 Approximate maximum power draw from the line/mains is 240vac x 30 amps =7200 watts (7.2kw).
@@danburch9989 thank you
Machine price and the company address.
hello, my whatsapp: +86-15522821686, please contact me
художественная лепка ... механические свойства полученых соединений кто то проверял ?
Price kya h machine ka
My whatsapp: +86 15522821686
Essa máquina não necessita de máscara de solda?
yes, we match the welding mask with machine
كام السعر المطلوب
would like to see welding different sizes. like a 2mm to a 5mm.
could you please give me your email or Whatsapp? I can send more details
Price
How about sch 80 150nb pipe……
Those are all corner welds how about flat welds
@@fiberlaserwisecut1636 price
ລາຄາເທົ່າໃດຢາກໃດ້
how much in Kenya
اين تباع قطع الغيار
Harga mesinnya brp pak
Q precio tiene el equipo soy de peru
There is a reason why they don’t show you a cross section.
That is not a fusion welding, that is a cold weld followed by a cold hardening, it will break.
You got the point it is bit suspicious video , i see a lot of limitation in this machine ..then the price is not effective considering the penetration limits .
, i use pulse YAG welder on jewelry and on the white gold alloyed with nickel no matter how brain stressing different setups on machine the welds are brittle . hard to get penetration unless the small fraction of millimeter beam is set but if going to far with that it just simply blow deep holes and one have to fix it by feeling them ..sometime it is frustrating impatient action . It works great on high carat yellow golds , palladium alloyed white gold ( beside leaving porosity behind ..ha ha .. and absolutely great on platinum ... I use laser on jewelry for decades and can't imagine now to be in business without it this days .
I use old school torch as well and laser mainly to talk parts together . ..about 50/50 both methods
I wonder if metal 3D printing is possible with laser welder
Probably not because too much heat would build up and then cause failure. Probably be expensive to cool it down fast enough to enable it. They already have 3D metal printing though using lasers and metal powder.
Try getting in tight corners with that giant gun..
Dónde se puede comprar esa máquina ..cuánto. Vale
How much cost that machine, i really want to buy it, how can i contact the seller?
Hello, my Whatsapp +86-15522821686, please contact me by whatsapp
Same as a house
Handheld laser welding machine is fast
How much
NO 1
Bu makineyi nerden bulurum
Does not show the end weld on any of the plates welded. Not good when advertising something.
碳钢不锈钢普通铝合金焊接没问题，高标号铝合金强度有问题，如7075
good but too expensive
Ya but just think your not going to have all these "experts" coming out of the woodwork telling you how to weld.
Bom dia essa maquina solda Latão ?
haw mach 2000w machine
Hello, Bassem, thanks for your inquiry, could you pls tell me your email or Whatsapp?
台灣在哪裏可以買到
Como eu faço pra comprar essa máquina
Hi, sir, where are you from? your email or whatsapp please
How much $$?
My whatsapp: +86 15522821686
How much the the price
My whatsapp: +86 15522821686
I want one.
РФ ДЕЛАЕТ ЛУЧШЕ ЛАЗЕРНЫЕ СВАРОЧНЫЕ АППАРАТЫ. ОНИ НАМНОГО МЕНЬШЕ, ЛЕГЧЕ, НЕ НУЖНО ДЕЛАТЬ НАСТРОЙКИ. В НАСТРОЙКАХ ПОДТВЕРЖДАЕШЬ КАКОЙ МЕТТАЛ И ВСЁ!!! ВЕС АППАРАТА 90 КГ.
Cost for whole set is RM 30K+
Absolutely worth every cent for commerical operations.
Cómo puedo adquirir una de estas máquinas
Donde se puede comprar
Quiero comprar una máquina de esas
Demonstration for welding .8 to 4mm thick SS by same machine for all type of joint .
Super !!😘🤪
Quanto custa solda laser com alimentador de arame
good
Look good but not lasting long
👍👍
What beautiful machines and what delicate work can be done with them. It's a pity that here in Mexico such a machine costs the same as a Toyota Corolla, due to taxes and import duties.
How n much it cost
I want one, hit me back.
Super wyślij mi jedną .
My whatsapp: +86 15522821686
They are great for pot metal other than that waste of money. A lot of money
😮
,
A
Damn, Shut Up Trump!. talk too damn much.
Очередное китайское намахалово
muito bom.