How to install a frameless glass pool fence with threaded rod spigots

Поділитися
Вставка
  • Опубліковано 3 жов 2019
  • This is a video of how to install a frameless glass pool fence with threaded rod spigots and bolting them down with the use of chemset, rather than the usual core drilling method.
    This method was really easy and made hardly any mess compared to core drilling and I would almost even say that doing it this way was stronger!
    We purchased this product from Outback Fencing www.outbackfencing.com.au
  • Навчання та стиль

КОМЕНТАРІ • 24

  • @davidparsons8318
    @davidparsons8318 4 роки тому

    Thanks for the video Lee! Very helpful 👍

    • @leebenson77
      @leebenson77  4 роки тому

      David Parsons no worries, glad it’s helped you out 👍

  • @ruthlessluder
    @ruthlessluder 3 роки тому +7

    Probably would have been less messy to use a shop vac with a narrow tube extension to clean up those dust.

    • @yurafael6725
      @yurafael6725 2 роки тому

      Hello friend If you need this type glass spigot I can provide to you

  • @mikehunt6280
    @mikehunt6280 3 роки тому +1

    Nice job. Core drilling far far far stronger

  • @noahpachur8326
    @noahpachur8326 3 роки тому

    Hi what size is the drill bit and what bolts do you use

  • @stainlesssteel..373
    @stainlesssteel..373 4 роки тому +1

    how to take glass saize?
    plz make vidio!

  • @Kimble221
    @Kimble221 3 роки тому +1

    So, yeah.

  • @mcbain_8446
    @mcbain_8446 4 роки тому

    Hey mate, just wondering whats the benefit of chemset vs just using dynabolts? I have to fix fence posts to concrete slab(with tile on top) using some bolt down square brackets and trying to decide best way. I'm just a little worried about tightening down onto tile and cracking it but seems like dynabolt or chemset will have the same result when tightening the nuts down

    • @leebenson77
      @leebenson77  4 роки тому +1

      Mcbain _ Dynabolts are not as strong in this situation and will loosen overtime

  • @kapkumar1243
    @kapkumar1243 2 роки тому +1

    Can you make a video about measurements

  • @buddwieser
    @buddwieser 3 роки тому +1

    Gidday did you use water with that drill through the tile?

    • @leebenson77
      @leebenson77  3 роки тому

      buddwieser you can use a little bit. I found the actual hammer drill worked faster than the drill I was using

  • @carnage4446
    @carnage4446 2 роки тому +1

    How far in do you install the spigots from the edge of the glass

    • @leebenson77
      @leebenson77  Рік тому

      About 1/4 of the way in at each end approx

  • @piribroughton
    @piribroughton 4 роки тому

    Hi did you have to "earth" the spigots? Cheers

    • @leebenson77
      @leebenson77  4 роки тому

      Yes these ones we did. But I believe you can buy ones that do it for you now

    • @leebenson77
      @leebenson77  3 роки тому

      In most states you only have to earth them if they are within 1.25m

  • @MrRamman04
    @MrRamman04 3 роки тому +1

    I install hundreds of these per year and wedge bolts are much faster and never come loose

    • @yurafael6725
      @yurafael6725 2 роки тому

      Pretty good
      Do you need any other products now

  • @truevalueglassmicheal2956
    @truevalueglassmicheal2956 Рік тому

    over kill