Я даже не думал, что у тебя так круто получится! Реализовано всё тоже очень качественно и с вниманием к деталям. Теперь в любой непонятной ситуации "Лови медведя!")))
Да, Виктор, спасибо) Получить зачет от кастом-мастера вдвойне ценно. Я изначально думал отправить его на покраску в Ороскастомстудию, но вроде как по итогу неплохо получилось)
Hi! I've picked it on a local russian marketplace. But I believe, you can buy it on Ali, for example this bear looks exactly like mine: aliexpress.ru/item/1005001479654334.html?spm=a2g2w.detail.similar_rcmd.4.1f434f90zfugfr&mixer_rcmd_bucket_id=aerabtestalgoRecommendAbV26_testRankingDefault&pdp_trigger_item_id=0_1005005485148512&ru_algo_pv_id=a236ee-61b690-f1aa00-753c4a-1715950800&scenario=aerSimilarItemPdpRcmd&sku_id=12000016286300173&traffic_source=recommendation&type_rcmd=core
@@MoscowTKD Hello, I still have a question. What is the white and green stuff you use for finishing and where on the internet to get this stuff? And what is the blue stuff you drip (?second glue?) into and cure with uv light? Thank you for any answer and have a nice day.
@@user-zj5gr3gd3d Hello! I picked all stuff on my local russian marketplaces. No problem, here is the list of materials, which I used in this project: 1) "super plastic" - white grannulas, which melt under hot water, and become very solid after being freezed. I used it to glue the parts and for molding. I believe you can find it on Aliexpress. It becomes a PVS-like plastic. 2) Clear liquid - is an epoxic goo, you should search for the variant, that becomes solid under UV-light. I think any marketplace has it on shelves, or in beauty salon. Girls like to cover their nails with this material. I used it to make claws and blood accesory. It becomes an ABS-like clear plastic. 3)"Green Stuff" - is a 2-component material of yellow and blue stripe, after mixing becomes green and you have a limited time to make a job, because it becomes an ABS-plastic like material. Look for it in modelling shops or warhammer shops. 4)"Blue Stuff" - comes in rubber-like bars, melts under hot water and you have some time to work with it, afterwards it can be melted again. Used for molding process. Find it in warhammer and modelling shops. 5)acrylic paint 6)glossy varnish for leather wares - for finish work.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Реально получилось шикарно, выше всяких похвал! На мой взгляд только крови стоило побольше добавить)
Спасибо, старался) Ну там новый хищник весь будет в кровищи, думаю достаточно) Хотя красной краской залить никогда не поздно.
Мясо!! Жир !! Огонь !!🔥🔥🔥
Хах, благодарствую!)
Я даже не думал, что у тебя так круто получится! Реализовано всё тоже очень качественно и с вниманием к деталям. Теперь в любой непонятной ситуации "Лови медведя!")))
Да, Виктор, спасибо) Получить зачет от кастом-мастера вдвойне ценно. Я изначально думал отправить его на покраску в Ороскастомстудию, но вроде как по итогу неплохо получилось)
Love it! Great job!!
Thank you!
I just got an Action man Bear, i think it will work great too aswell since it has fur, and internal bendy wire and you can modify it pretty easily :D
Oh, that's cool) Is it the bear with a large gun on its back?
I wish we get a bear skull trophy
Hm, that's a good idea. Perhaps, there is a 3d model for printing?
Do it yourself! Сделай сам!
За что ты так мишку?😂 Гринписа на тебя нет!
Санитарный отстрел)
Hello, is there any internet link where exactly to buy this bear? Thank you
Hi! I've picked it on a local russian marketplace. But I believe, you can buy it on Ali, for example this bear looks exactly like mine: aliexpress.ru/item/1005001479654334.html?spm=a2g2w.detail.similar_rcmd.4.1f434f90zfugfr&mixer_rcmd_bucket_id=aerabtestalgoRecommendAbV26_testRankingDefault&pdp_trigger_item_id=0_1005005485148512&ru_algo_pv_id=a236ee-61b690-f1aa00-753c4a-1715950800&scenario=aerSimilarItemPdpRcmd&sku_id=12000016286300173&traffic_source=recommendation&type_rcmd=core
@@MoscowTKD Thank you for your reply
@@user-zj5gr3gd3d U're welcome!
@@MoscowTKD Hello, I still have a question. What is the white and green stuff you use for finishing and where on the internet to get this stuff? And what is the blue stuff you drip (?second glue?) into and cure with uv light? Thank you for any answer and have a nice day.
@@user-zj5gr3gd3d Hello! I picked all stuff on my local russian marketplaces. No problem, here is the list of materials, which I used in this project:
1) "super plastic" - white grannulas, which melt under hot water, and become very solid after being freezed. I used it to glue the parts and for molding. I believe you can find it on Aliexpress. It becomes a PVS-like plastic.
2) Clear liquid - is an epoxic goo, you should search for the variant, that becomes solid under UV-light. I think any marketplace has it on shelves, or in beauty salon. Girls like to cover their nails with this material. I used it to make claws and blood accesory. It becomes an ABS-like clear plastic.
3)"Green Stuff" - is a 2-component material of yellow and blue stripe, after mixing becomes green and you have a limited time to make a job, because it becomes an ABS-plastic like material. Look for it in modelling shops or warhammer shops.
4)"Blue Stuff" - comes in rubber-like bars, melts under hot water and you have some time to work with it, afterwards it can be melted again. Used for molding process. Find it in warhammer and modelling shops.
5)acrylic paint
6)glossy varnish for leather wares - for finish work.