For those wondering how Matt's system will fill the barrels, here's a short explanation: BERNOULLI'S EQUATION!!! Long answer: His watering system has two free surfaces of water: 1) Gutters and 2) Barrels As long as there is a difference in elevation (delta_h) between the two free surfaces there exists a hydro-static pressure (P) gradient which will force the water against gravity into the barrels; this is commonly referred to static pressure or head. The barrels will only fill when the water in the piping is filled fully to a level above the outlet of the barrels. This will result in the flow naturally traveling from an area of higher pressure to lower pressure without a pump. The system works off of the principle of Bernoulli's equation (I've already simplified it): p1 + rho*g*h1 = p2 + rho*g*h2 Solving for p1 - p2 (now called del_p) del_p = rho*g*(h2-h1) (I will now call h2-h1 as del_h) del_p = rho*g*del_h Therefore, the pressure difference is a function of fluid density (rho), gravity (g), and the differences in the two points (del_h). Since a pressure difference exists, the fluid will flow from gutter to barrel; the area of high pressure to lower pressure. Good job, Matt!!
Thank you, i was so bugged by the doubts that i seriously considered extending my lunch break and explaining people why it will work. So thank you for spending your time on your comment and saving my time. Back to work lol - - >
+M M No problem! I usually don't waste time on UA-cam comments but I had no choice for multiple reasons: 1) I couldn't allow people to be hating on Matt 2) Hopefully people will learn from it 3) Did I mention people being mean to Matt? 4) I am a mechanical engineer
Buy the leaf guards for gutters they go over the down spout and trap leaves and rocks from clogging the pipes. You'll just have sediment that is tiny about the size the chicken's naturally eat.
Matt with the holes that you put in the gutters for the water to run down you should put a mesh screen over the holes and glue it down that way big debri won't go in the smaller pipes and clog it
That gutter system is neat. My only concern is having the exposed pipe to the sun. You might want to wrap the pipes to keep the water from being really hot when the chickens use the nipples. Similar to leaving a garden hose in the sun.
It will work. the pipes and barrels act as one closed system, with the outlets at the lowest point. the intakes are all above so will fill the entire system (including the barrels) until all the pipes and barrels are completely full. The system will work. Just leave the lits off the barrels, but then they will overflow first, might want to think about a drainage system for that. But probably wont get anywhere near enough rain for that to be a problem.
Screw the water system, the progress of that buggy/car is amazing! Been following you for a while all the way from Australia and we don't have anything as badass as that! Keep up the entertaining work you legend!
Dont forget vents on the barrels so they dont get air locked, and be careful with Legionella might be harmful to the chickens, or kids. Im a plumber btw and you did a damn nice job
Blakeley Odom that's exactly what I was thinking 2 minutes into this video. I'm not a plumber and I'm not a veterinarian but I'm pretty sure physics works the same whether I do those things for a living or not.
Andrew Jardine OffTheRanch the only reason I don't think it will work efficiently is due the the differences in surface area from the pipe system to the bottom of the barrel. The pressures must be equal for the barrels to fill and so yes the pipes will fill but once the barrel starts to fill it will technically be exerting at least 10x more like 20x the force on the system than the water flowing into the pipes. Two easy fixes run the pipes to the top from the bottom because the pressure would be enough to force the water up and the level would would attempt to put the water to the same height as the roof. The only downside is that it will still not work properly in supplying he water to the chickens. The second option is to fill the up first and make a closed system with about 1/10 air in the barrels and then pump the air out so instead of the barrel applying a positive pressure to the system it would be negative meaning the water would be a bit more free to flow. The real easiest solution though is just fill the barrels from the top and feed from the bottom so you don't have to worry about the pressures in the system as a whole.
OffTheRanch if you vent both barrels it will work just like you want it to. All you need is one over flow pipe going out with both barrels tied into it.
Al Gore wants to tax gravity too? Oh yeah, it does not exist. Gravity is really buoyancy and density. Look into the flat earth math for curvature.. It's flat and all we were taught was lies.
I suggest installing a "drip leg" with a removable cap at the system low point, this will give a spot for the sand to fall down out of the flow and allow for draining it out. The principal is the same as that used on gas water heaters and furnaces when they pipe in the gas.
Matt, if the chickens don't learn how to use the water nipples, you can always use a laser pointer to teach them quicker, and it's pretty entertaining watching them chase it around.
Need a 9mm? got one Need a 45 ACP? got one Need a 500 mag? got one Need a 5.56? got one Need a .50 cal? got one Need a rivet gun.... dont have one of those
Man, I've had a night of memories with my brother and our poppa. Dads health is getting bad, and my brother and i spent over three hours telling stories of our youth. I hope when you and your family are all growed up, y'all have a night like this someday FAR in the future. Thanks for sharing the story of your beautiful family with us, and may your family be as blessed as mine has, come what may. (MOVE OVER, ROVER, MATT IS COMING ON OVER)
Hey matt. A quick tip: you may have to add a pipe a litle lower than the barrel border, leading to the outside of the chicken coops. This pipe is called "thief pipe" here in Brazil and prevents the water from leaquing out from the top of the barrel. When the water level rises almost to the top of the barrel, it will flow out the barrel throu the "thief pipe" and you will not soak the poor chickens :)
I came here to say something about that, an overflow check is crucial. If the barrels were sealed up it wouldn't be a big deal, but then they would have diminished capacity due to pressurization issues. (gravity-fed systems cannot compress a gas down very well unless they're large)
Bruno Gardi There are a few commercial products here that do the same thing, just at the downspout to the gutter and not the catchment vessel itself. Basically when full a horizontal pipe that connects the container to the downspout fills with water and diverts any extra out the downspout. Honestly its just overcomplicating a simple concept, but the finished product looks much better in my opinion.
That gravity flow system will only work if you do a gun give away. Something like a skeletonized AR or a Barrett will probably make it work pretty well.
Hi Matt, I love what you have done with the chicken coop, makes life a little easier. That car, and the paint job, looks awesome. I can't wait for it to be finished. It will look awesome, love it. God Bless, my friend.
Looks like a good system, man! In heavy rain, 3/4 may not be able to keep up with the total water flow, but it will keep flow stable. You will want to keep up with the cleaning though. And if you have any problems with the fill/drain at the bottom of the barrels, give a holler. Remember, 100% silicone is your friend. Just be sure it cures. Source: Master plumber, engineering degree
Texan Pride It is not Bernoulli's Principle, that applies to pressure, which would be equal in this system. There are two vessels, the outer pipes and the barrels, which communicate though connecting pipes to stay at an equal level.
Continue reading one of the greatest ideas ever pitched to you below! Matt you are one hell of a man and Texan! You make me proud to be a Texan. God Bless you and thank you for everything you and your family do. I have a GREAT idea for a video for Demo Ranch. You should team up with the Slow Mo Guys and go back through all the "Homemade Shotgun Shell" videos and capture them all in high FPS. Think about that ..... Example..... thumb tacks fired and captured on high speed at like 20,000 FPS. It would be F#%$ING AWESOME!!!! PLEASE DO IT!!! Everyone that wants to see this please like this!! Thank you for all your hard work and dedication Matt keep up the great work!
When it started raining, it reminded me of the scenery when I went to visit my ex for Christmas last year. It made my depression worse but, I love these videos. It's cute to see his kids so entertained.
For the chicken coop, you may want to add a foam gutter filter than stops leaves and things from going into the gutter from home Depot. They're like ten bucks a piece
Ok now you've done it ! Killer job on the show . My wife and I really enjoy watching the family and yourself ,it awesome . My wife and are also Hunan daughter gear heads . Your Goblin is awesome . My favorite form of stress relief ,you guessed it Gun powder and Gas . Great job and what a wonderful family !
it should work okay-ish, but would work better if the barrels were filled from the top. i think. interwebs please correct me i could be completely wrong. never mind, i just thought about it for another min. and bottom fulling will prevent sediment from getting into the barrels. Matt is one smart cookie.
Matt what I did was use a string that goes from the lock in the chicken coop's entrance over the door and to a little place for it so you can pull it whenever you get locked inside and it will open.
It would be amazing if you had car decals with the eagle!!! I bought one of the old stickers and cut it out and stuck it on my side window but it's already peeling since it's not weather proof material I doubt you'll see this but I would totally rock one on my car if you sold them.
I used to design and build rainwater tanks and collection for houses. You Might get away with that small pipe but you have to remember as a general rule you need overflow points on the tanks for when they fill up and it's still raining. The rule generally is the number of pipes going in you need the same going out or you run the risk of the tanks overflowing inside your chicken coup. Or alternatively have a larger diameter pipe for the overflow than several pipes going in as the formulas for volume are weird when it comes to pipes. Going from a say 50mm diameter pipe to a 100mm diameter pipe does not just double the amout of water that can go through. It's about 8 times the amount. I really can't remember all the formulas but I also used them to work out flow rates for irrigation pumps and such. It's been 10 years since I was doing that but some good points to remember. Dont forget to put overflow points at the top of your tanks or they will flood you coup
The car looks so great. The eagle makes the body way better because it looked so cool without The body panels as well in my opinion. Awesome toy man you deserve it. I bought a Cobalt SS Supercharged a while ago and it's a pretty fun car. Thanks for the video! -Cody
According to "communicating vessels" therory his system WILL WORK since his barrel are lower than the roof top! And also chickens will be able to consume all the water in the barrels since the nipple thingis are lower than the bottom of the barrels. The only problem is that a little bit of water will be always stuck in the lowest pipe that is lower than nipples, but it's not much I guess.
Cool video! Really starting to watch off the ranch more often. Side note, I had a black Lab named Dozzer! He was 16 yrs old when he crossed the Rainbow Bridge last year, he was a great friend and companion and I will always miss him, ☮️!
The car looks awesome! Such a fun project. I just installed a water system for my chickens similar to the one you installed and my chickens are having a hard time figuring out the water nipples. I hope your chickens are smarter!
OnTheBrim Great, now how much is that in USD? Also, factor probably around 5k for shipping, then a 10-15% tax, and since it's then a "sports car" and not a kit, insurance would also be more.
rjk Well, what I was thinking, but may be wrong: how will the water flow from the lowest point of the pipe up into the barrels? Water generally don't go up...So am I wrong? lol 🤔
Points to consider. 1) Water treatment- barrels of standing warm water is a great breeding ground. 2) 100% need to filter on the intake due to gravel from composite shingles. 3) Chickens naturally peck at red (blood) , natural feeding behavior. 4) Personally don't think the barrel fill strategy will work due to hydraulic pressure. Fill barrels first then let pressure from barrels fill system. 5) May want to consider a solar powered fan on the inside of coop , Chickens are very temp sensitive.
System will work physics say so. My concern is about gutters. Draining pipes are too skinny and if it rains much it can not drain all the water in the gutters. As it gets more and more heavy gutters may be broken.
One problem with the chicken coop is the barrels are higher than the nipples but the tubing isn't so the bottom bit of water will sit instead of going to the nipples.
The weight of the water will push water through the system, into the barrels, and the weight of the water in the barrels will push water to the nipples. Water is self leveling.
Water flows downhill...... So long as the water level is higher than any of the piping that it has to flow through to get to the nipples (which it is) the water will always cover the nipples when there is water in the barrels.
Matt the barrels are above the fill point so the barrels won't fill properly. I'd put the fill points on top of the barrels and have the overflow a couple inches from the top of the barrels. Gravity and water weight would make it so the water levels in the pipes and barrels are equal.
For those wondering how Matt's system will fill the barrels, here's a short explanation:
BERNOULLI'S EQUATION!!!
Long answer:
His watering system has two free surfaces of water: 1) Gutters and 2) Barrels
As long as there is a difference in elevation (delta_h) between the two free surfaces there exists a hydro-static pressure (P) gradient which will force the water against gravity into the barrels; this is commonly referred to static pressure or head.
The barrels will only fill when the water in the piping is filled fully to a level above the outlet of the barrels. This will result in the flow naturally traveling from an area of higher pressure to lower pressure without a pump.
The system works off of the principle of Bernoulli's equation (I've already simplified it):
p1 + rho*g*h1 = p2 + rho*g*h2
Solving for p1 - p2 (now called del_p)
del_p = rho*g*(h2-h1) (I will now call h2-h1 as del_h)
del_p = rho*g*del_h
Therefore, the pressure difference is a function of fluid density (rho), gravity (g), and the differences in the two points (del_h). Since a pressure difference exists, the fluid will flow from gutter to barrel; the area of high pressure to lower pressure.
Good job, Matt!!
Kyle Yeomans THANK YOU!!! Everyone's hating on my system and doubting it. Lol. It will work people, I'll show you soon!!!
+OffTheRanch You're welcome! I look forward to seeing it!
Thank you, i was so bugged by the doubts that i seriously considered extending my lunch break and explaining people why it will work. So thank you for spending your time on your comment and saving my time. Back to work lol - - >
Thank you for educating me. I did not know about Bernoulli's principle.
+M M No problem! I usually don't waste time on UA-cam comments but I had no choice for multiple reasons:
1) I couldn't allow people to be hating on Matt
2) Hopefully people will learn from it
3) Did I mention people being mean to Matt?
4) I am a mechanical engineer
Buy the leaf guards for gutters they go over the down spout and trap leaves and rocks from clogging the pipes. You'll just have sediment that is tiny about the size the chicken's naturally eat.
Matt with the holes that you put in the gutters for the water to run down you should put a mesh screen over the holes and glue it down that way big debri won't go in the smaller pipes and clog it
You were so excited that whole day! You even said "best day ever!" Always positive! You guys are great!
That gutter system is neat. My only concern is having the exposed pipe to the sun. You might want to wrap the pipes to keep the water from being really hot when the chickens use the nipples. Similar to leaving a garden hose in the sun.
It will work. the pipes and barrels act as one closed system, with the outlets at the lowest point. the intakes are all above so will fill the entire system (including the barrels) until all the pipes and barrels are completely full. The system will work. Just leave the lits off the barrels, but then they will overflow first, might want to think about a drainage system for that. But probably wont get anywhere near enough rain for that to be a problem.
Home Depot should be a sponsor of this channel
Jason Liederbach tractor supply too!
Jason Liederbach Drsaw 8 mmmk
kfreghbifregreiigerhbiregerireiregrehiregrger 2
You should put a filter thing over the top of the gutter so leafs don't get caught up in theirs
Cameron Myers from the no trees around his system...
Only10re that don't mean shit
Only10re Ever heard about wind carrying stuff? There will be sand, leaves, and other shit building up slowly.
Tiffany great comment.
Or a wire mesh over the pipe.
Screw the water system, the progress of that buggy/car is amazing! Been following you for a while all the way from Australia and we don't have anything as badass as that! Keep up the entertaining work you legend!
Dont forget vents on the barrels so they dont get air locked, and be careful with Legionella might be harmful to the chickens, or kids. Im a plumber btw and you did a damn nice job
Blakeley Odom that's exactly what I was thinking 2 minutes into this video. I'm not a plumber and I'm not a veterinarian but I'm pretty sure physics works the same whether I do those things for a living or not.
think a second time befor writing such a comment!!!
Blakeley Odom, it'll work fine ... so long as the barrels are lower than the fill intake point which is the gutters!!
Martin L *before
Andrew D'Elia then you don't know how physics work, because this system will work fine... do you understand water pressure?
As a plumbing engineer i can say gravity feed water systems work as water likes to automatically level its self out
Andrew Jardine thanks for the support! Amazing how many people are doubting this way haha. I'll show them!
Andrew Jardine OffTheRanch the only reason I don't think it will work efficiently is due the the differences in surface area from the pipe system to the bottom of the barrel. The pressures must be equal for the barrels to fill and so yes the pipes will fill but once the barrel starts to fill it will technically be exerting at least 10x more like 20x the force on the system than the water flowing into the pipes. Two easy fixes run the pipes to the top from the bottom because the pressure would be enough to force the water up and the level would would attempt to put the water to the same height as the roof. The only downside is that it will still not work properly in supplying he water to the chickens. The second option is to fill the up first and make a closed system with about 1/10 air in the barrels and then pump the air out so instead of the barrel applying a positive pressure to the system it would be negative meaning the water would be a bit more free to flow. The real easiest solution though is just fill the barrels from the top and feed from the bottom so you don't have to worry about the pressures in the system as a whole.
OffTheRanch if you vent both barrels it will work just like you want it to. All you need is one over flow pipe going out with both barrels tied into it.
His gravity bill is gonna go through the roof with that new watering system installed.
Al Gore wants to tax gravity too? Oh yeah, it does not exist. Gravity is really buoyancy and density. Look into the flat earth math for curvature.. It's flat and all we were taught was lies.
Chris
That's Texas, not commiefornia. They don't have a gravity bill, and it's not illegal to collect rainwater.
its a fucking joke, you guys are idiots
Jeff Beck the earth is not flat. when you fly in a plane can you see the whole world. no.
Jeff Beck if the earth is flat why don't you go down in history and be the first to jump off the edge.
At the bottom of the pipe you can put an extension to trap dirt before it goes in the tank,with a screw cap.
I love your show and your family its just good clean fun! THANK YOU!
I suggest installing a
"drip leg" with a removable cap at the system low point, this will give a spot for the sand to fall down out of the flow and allow for draining it out. The principal is the same as that used on gas water heaters and furnaces when they pipe in the gas.
Matt, if the chickens don't learn how to use the water nipples, you can always use a laser pointer to teach them quicker, and it's pretty entertaining watching them chase it around.
I want him to tape that...LOL
You should put a wire filter or something similar at the top to stop big debris from entering the pipes
Huntch Squad absolutely
That's what I was thinking, so he wouldn't have to waste water cleaning out the pipes
Need a 9mm? got one
Need a 45 ACP? got one
Need a 500 mag? got one
Need a 5.56? got one
Need a .50 cal? got one
Need a rivet gun.... dont have one of those
CrazyIrishMedic if I could double like I would lol
Do you own a high point?
CrazyIrishMedic this isn't demolition ranch🤣
CrazyIrishMedic ÿ
Man, I've had a night of memories with my brother and our poppa. Dads health is getting bad, and my brother and i spent over three hours telling stories of our youth. I hope when you and your family are all growed up, y'all have a night like this someday FAR in the future. Thanks for sharing the story of your beautiful family with us, and may your family be as blessed as mine has, come what may.
(MOVE OVER, ROVER, MATT IS COMING ON OVER)
Set's up an entire chicken watering system but still doesn't have a latch to open the coop from the inside.
Trustyn Arkanj Salt. 😂😂
Trustyn Arkanj I
I guess Matt's just your typical absent-minded mad genius.
Maybe he doesn't want the chickens letting themselves out of the coop.
Trustyn Arkanj iiiiii.
Hey matt. A quick tip: you may have to add a pipe a litle lower than the barrel border, leading to the outside of the chicken coops. This pipe is called "thief pipe" here in Brazil and prevents the water from leaquing out from the top of the barrel. When the water level rises almost to the top of the barrel, it will flow out the barrel throu the "thief pipe" and you will not soak the poor chickens :)
I came here to say something about that, an overflow check is crucial. If the barrels were sealed up it wouldn't be a big deal, but then they would have diminished capacity due to pressurization issues. (gravity-fed systems cannot compress a gas down very well unless they're large)
Bruno Gardi
There are a few commercial products here that do the same thing, just at the downspout to the gutter and not the catchment vessel itself. Basically when full a horizontal pipe that connects the container to the downspout fills with water and diverts any extra out the downspout.
Honestly its just overcomplicating a simple concept, but the finished product looks much better in my opinion.
Pretty sure he already said he was adding an overflow relief to the barrels.
That gravity flow system will only work if you do a gun give away. Something like a skeletonized AR or a Barrett will probably make it work pretty well.
tigersdl65 that's the only way
tigersdl65 the only way...
Don't EVER leave it so long between videos again, you know how much I worry.... you don't call, you don't text.... I waited up all night... 🤦🏼♂️
The 3D Jedi I'm sorry
The 3D Jedi RIGHT?!
The 3D Jedi I was feeling the same way! We missed you Carriker family!! 😀
The 3D Jedi 😂😂😂
funy
Hi Matt, I love what you have done with the chicken coop, makes life a little easier. That car, and the paint job, looks awesome. I can't wait for it to be finished. It will look awesome, love it. God Bless, my friend.
Looks like a good system, man! In heavy rain, 3/4 may not be able to keep up with the total water flow, but it will keep flow stable. You will want to keep up with the cleaning though. And if you have any problems with the fill/drain at the bottom of the barrels, give a holler. Remember, 100% silicone is your friend. Just be sure it cures.
Source: Master plumber, engineering degree
Right on Matt! Good thinking with Bernoullis principle! Car looks awesome too! Love ya'll and God bless!
Texan Pride It is not Bernoulli's Principle, that applies to pressure, which would be equal in this system. There are two vessels, the outer pipes and the barrels, which communicate though connecting pipes to stay at an equal level.
You should add gutter screens/filters that way it prevents any leaves or debris from collecting in the gutters, and potentially clogging your piping.
good vid man keep it up u are great
Continue reading one of the greatest ideas ever pitched to you below!
Matt you are one hell of a man and Texan! You make me proud to be a Texan. God Bless you and thank you for everything you and your family do.
I have a GREAT idea for a video for Demo Ranch. You should team up with the Slow Mo Guys and go back through all the "Homemade Shotgun Shell" videos and capture them all in high FPS. Think about that ..... Example..... thumb tacks fired and captured on high speed at like 20,000 FPS. It would be F#%$ING AWESOME!!!! PLEASE DO IT!!! Everyone that wants to see this please like this!! Thank you for all your hard work and dedication Matt keep up the great work!
When it started raining, it reminded me of the scenery when I went to visit my ex for Christmas last year. It made my depression worse but, I love these videos. It's cute to see his kids so entertained.
Physics is the answer, what was the question? This system is flawless people get over it allready
Andy.M 891 it's people that have no idea what they are talking about that think they know everything....
13:00 is about his new car!!
not new.
JeefCake it's still new he only had it for a month
I love seeing your family you have such a beautiful family!!! ☺️👍🏻😉
Is your brother by chance named Tim?
@@zion1385 I don't think so, Tim.
I can't believe four years went by with nobody taking advantage of this obvious setup lol, had to fix that
Pretty cool idea Matt, love you're videos, keep it up!
Hey Matt
I think you should add some Gutter Guard to the new gutters to help prevent any debris from clogging the pipes as well :)
A day in the life of dozer some time?
#goprodoze
we want whole series in Dozer
For the chicken coop, you may want to add a foam gutter filter than stops leaves and things from going into the gutter from home Depot. They're like ten bucks a piece
love all the comments saying it wont work, Fluid dynamics prove it will work
Ok now you've done it ! Killer job on the show . My wife and I really enjoy watching the family and yourself ,it awesome . My wife and are also Hunan daughter gear heads . Your Goblin is awesome . My favorite form of stress relief ,you guessed it Gun powder and Gas . Great job and what a wonderful family !
it should work okay-ish, but would work better if the barrels were filled from the top. i think. interwebs please correct me i could be completely wrong.
never mind, i just thought about it for another min. and bottom fulling will prevent sediment from getting into the barrels. Matt is one smart cookie.
4:58 who's horse?
You should add a strain filter thing at the gutter and pipe so you don't get leaves and stuff into it
@OffTheRanch this!
Your kid shouting "It's working!" Was giving me Star Wars flashbacks 😂
gergebrbiregebrefrehbreerireibireghebifregibfierghierrehbfreghbi 2
liked the videos I have always loved building things with family keep it up I would love that decal for my truck
We need more people like you guys. Popular but humble
Matt what I did was use a string that goes from the lock in the chicken coop's entrance over the door and to a little place for it so you can pull it whenever you get locked inside and it will open.
I've been waiting for him to get a double sided latch. After getting locked in the first time you'd think that would be the first thing he replaced.
this man's got brains
It would be amazing if you had car decals with the eagle!!! I bought one of the old stickers and cut it out and stuck it on my side window but it's already peeling since it's not weather proof material I doubt you'll see this but I would totally rock one on my car if you sold them.
I used to design and build rainwater tanks and collection for houses. You Might get away with that small pipe but you have to remember as a general rule you need overflow points on the tanks for when they fill up and it's still raining. The rule generally is the number of pipes going in you need the same going out or you run the risk of the tanks overflowing inside your chicken coup. Or alternatively have a larger diameter pipe for the overflow than several pipes going in as the formulas for volume are weird when it comes to pipes. Going from a say 50mm diameter pipe to a 100mm diameter pipe does not just double the amout of water that can go through. It's about 8 times the amount. I really can't remember all the formulas but I also used them to work out flow rates for irrigation pumps and such. It's been 10 years since I was doing that but some good points to remember. Dont forget to put overflow points at the top of your tanks or they will flood you coup
Your life is literally goals. More than anything I've ever seen
With only a single barrel top tapped for the overflow, the air will never get pushed out of the second, untapped barrel.
JackANSI yes both barrels have to have an over flow/vent!
Is it weird I find myself productive by just watching Matt doing productive stuff? Haha. Now I need a snack with all the work Matt and I done.
Alright... Now I want a sticker of the eagle for the Jeep.. make it happen!
I second this. I need a AR eagle wing sticker for my Jeep Xj.
I love Dozer so much
Great work Matt! The car looks awesome and Mere is sooo right; DEFINITELY need to run those shirts again in OD green!
The Goblin looks great with that grey eagle in the green
Make a gun holder on your buggy
Geh_mine_r Agreed, that would be great!
Better yet...have Alec Steele out to the ranch to shoot and he can forge a gun rack for it...
Geh_mine_r in South Africa you can ligaly attach a flamethrower to your car
Geh_mine_r a 50 cal
Could you please release the T shirt with the Demo ranch eagle on it one more time? I mean for your new viewers (like me) :)
Nice system Matt.
Wish I had your enthusiasm for DIY.
The car looks so great. The eagle makes the body way better because it looked so cool without
The body panels as well in my opinion. Awesome toy man you deserve it. I bought a Cobalt SS Supercharged a while ago and it's a pretty fun car. Thanks for the video! -Cody
Who's eyes lit up when you saw the cover
Hey ppl in the comment section, I don't think there's enough of you telling Matt how his water barrels won't get filled with this system.
aolerma Yea I dont think there are enough people telling him. Maybe we should invite some more people to the party.
aolerma he has to have some holes or the air pressure wont let anything in
thank God I'm not the only one that thinks this😂
aolerma bro, what if Matt mounted a machine gun to the back of the car? That's would be 😉👌🏻.
According to "communicating vessels" therory his system WILL WORK since his barrel are lower than the roof top! And also chickens will be able to consume all the water in the barrels since the nipple thingis are lower than the bottom of the barrels. The only problem is that a little bit of water will be always stuck in the lowest pipe that is lower than nipples, but it's not much I guess.
Cool video! Really starting to watch off the ranch more often. Side note, I had a black Lab named Dozzer! He was 16 yrs old when he crossed the Rainbow Bridge last year, he was a great friend and companion and I will always miss him, ☮️!
Rest in peace "Black Lab Dozzer" :'( It always makes me sad to hear of an animals death.
The car looks awesome! Such a fun project. I just installed a water system for my chickens similar to the one you installed and my chickens are having a hard time figuring out the water nipples. I hope your chickens are smarter!
Been watching for years such a cool dude and a cool dad aswell keep it up dude
YES! Run the shirts again!
I would put mesh on top your gutter to keep out large debris it'll keep it cleaner longer
It's raining it's pouring matts idea is working
: 0 )
I love it when one of Matt's plans work. Aahhhhhhhhhh such a great feeling...
9:10 Yes Mere, he said, "The best day of my life"
kergiierggregibiergrekbiergrebireiregrereg 2
Those shirts would be amazing you totally should do it.
Yes please! Do it Matt!
New car done and it's awesome!
TIME TO BUY A NEW CAR!
he already has his dead friend's Bronco
Ray D. Not a downer at all
I don't understand how the water will fill the barrels.
It's not gonna work like this! He gonna find out soon 🤣
That Guy lol cause water can travel uphill
i was wondering the same thing, he needs to have pass through feed to the barrels instead of bottom-fed
Yeah, I'm thinking about it as well. But I'm interested how it will end up.
Because the gutters are higher than the barrels so this process called gravity will take place
The car is AWESOME 🔥🔥🔥🔥🔥
Looking nice! Can't wait for it to be finished!
It's moments like these that I realize just how American Matt is.
You probably won't see this comment, but good job, keep up the hard work !!! Thanks for the opportunity to watch good fun videos THANKS AGAIN
I'm to lazy to make that car so I'll just buy a Ariel atom😂
Your English hurts me internally
Brandon Stumm you realize an atom cost 162k while his goblin only cost 18k fully prebuilt by a shop
but ur a uk person
OnTheBrim Great, now how much is that in USD? Also, factor probably around 5k for shipping, then a 10-15% tax, and since it's then a "sports car" and not a kit, insurance would also be more.
A 86 Vette cart is even cheaper
Very nice system. I hope it works well. I would put screens over the gutters to prevent leaves from entering the system.
Love how you have your irrigation system set up cool car too
i love all the people in the comments that think their so smart and saying this wont work its simple engineering
Jarred they're*
*they're...sorry
I clicked the video for the car then watch a guy make a chicken water system
TURBOCHARGED GOBLIN V.S. Leroy!!
IAMCHUBBZ I get it😂
IAMCHUBBZ **Leroy the Savage
IAMCHUBBZ do u know how much the power diff is
Tanner T Yup!! Leroy is going to kick assin a drag, but like in a track day or something that they can race.
IAMCHUBBZ Leroy the savage would defenantly win
Looking awesome matt can't wait to see it in it's full glory!
sweet design for the car, love it!!! Can't wait to see it finished.
Cue hilarious comments from people that don't understand hydraulic theory.
Indeed... :)
Barry Allard and whether or not it will crush a chicken if It can't
Barry Allard 13:11 was she touching her butt
My question is are you sure you can support over 1000 pounds in just those few pieces of wood
rjk Well, what I was thinking, but may be wrong: how will the water flow from the lowest point of the pipe up into the barrels? Water generally don't go up...So am I wrong? lol 🤔
"This here is called a chicken watering nipple"
So it's a Chipple...
Better than a bear with AK appendages I guess...
Points to consider. 1) Water treatment- barrels of standing warm water is a great breeding ground. 2) 100% need to filter on the intake due to gravel from composite shingles. 3) Chickens naturally peck at red (blood) , natural feeding behavior. 4) Personally don't think the barrel fill strategy will work due to hydraulic pressure. Fill barrels first then let pressure from barrels fill system. 5) May want to consider a solar powered fan on the inside of coop , Chickens are very temp sensitive.
Matt, you're very talented , Keep up the great work!
Ya but will your new car stop a 50 cal???????? Next up on demo ranch
Bud D ''how many chickens does it take to stop a 50cal?''
How many chicken eggs does it take to stop a .50 cal????
Lee Turner when you realize your reply has more likes than the comment
I think more than he has in that coupe...But definitely something that should be tested.
8:36 ladies
System will work physics say so. My concern is about gutters. Draining pipes are too skinny and if it rains much it can not drain all the water in the gutters. As it gets more and more heavy gutters may be broken.
really gonna need a good gutter filter thingy because of all the piping. great work! its gonna be awesome!
The Goblin looks amazing. Can't wait to see the finished product!
One problem with the chicken coop is the barrels are higher than the nipples but the tubing isn't so the bottom bit of water will sit instead of going to the nipples.
The weight of the water will push water through the system, into the barrels, and the weight of the water in the barrels will push water to the nipples. Water is self leveling.
Water flows downhill...... So long as the water level is higher than any of the piping that it has to flow through to get to the nipples (which it is) the water will always cover the nipples when there is water in the barrels.
You'll need to vent/overflow both barrels. Otherwise the one that isn't vented won't fill.
JEC III lol he exposed the ppl who said it won't work in his recent video
You played yourself
I'm going camping tomorrow
The body was so much better than i expected, 10/10
Matt the barrels are above the fill point so the barrels won't fill properly. I'd put the fill points on top of the barrels and have the overflow a couple inches from the top of the barrels. Gravity and water weight would make it so the water levels in the pipes and barrels are equal.