Hi there! Thanks for sharing you're knowledge! I'm having the same issue "'ITE Busy'" error tried to solder the bios chip form the motherboard witch needed the ITE to be programmed, the motherboard has 2 bios chips a 4MB and a 2MB and I use the larger one, got message on the programmer "ITE not ready, try again"' should I solder booth? I see space for another bios chip above.. also for future reference can you have any bios chip solder on the debug board or must be the bios form motherboard? Thanks a lot!
@@Aditya11ttt Thanks for the reply! Have manage to solve de issue first of all by replacing the EC/SIO, original one was damage (I couldn't erase it) and something that you haven't mention in video, the bios chip must be blank (the one that you solder on the debug board, ,maybe helps someone else in the future), also must wait after selecting motherboard zif128_ite before clicking read ID, for a few second. Cheers!
Have you soldered the main bios ic with KBC ? or EC bios and KBC? I have a problem trying to program IT8225VG, SVOD says that pines are ok, connect GND and power it, but when I press read id says that ITE is bussy, do you now what I need to do to solve it?
Hello, a question, is the bios module also necessary to solder it to the ZIF socket ENE?
On zif socket there is no bios chip or module soldered | neither it’s necessary it depends on your desing and usage
@@Aditya11ttt THANK YOU AS I SEE IN THE VIDEO THAT THEY WELD A BIOS MODULE TO SOLVE THE PROBLEM
@@jaimezapata6615 depends on the issue y face
Thank you
Hi there! Thanks for sharing you're knowledge! I'm having the same issue "'ITE Busy'" error tried to solder the bios chip form the motherboard witch needed the ITE to be programmed, the motherboard has 2 bios chips a 4MB and a 2MB and I use the larger one, got message on the programmer "ITE not ready, try again"' should I solder booth? I see space for another bios chip above.. also for future reference can you have any bios chip solder on the debug board or must be the bios form motherboard? Thanks a lot!
Yes u can use any bios Spi chip 1mb : 2mb : 4 etc
@@Aditya11ttt Thanks for the reply! Have manage to solve de issue first of all by replacing the EC/SIO, original one was damage (I couldn't erase it) and something that you haven't mention in video, the bios chip must be blank (the one that you solder on the debug board, ,maybe helps someone else in the future), also must wait after selecting motherboard zif128_ite before clicking read ID, for a few second. Cheers!
Have you soldered the main bios ic with KBC ? or EC bios and KBC? I have a problem trying to program IT8225VG, SVOD says that pines are ok, connect GND and power it, but when I press read id says that ITE is bussy, do you now what I need to do to solve it?
Means ks09 is low until it’s low will be busy and should be auto high !
Will you please tell me which model of i3 or i5 cpu support for the HM70 chipset
Pentium or celron will work
If u place Higher version cpu it will work for 30min and go off !
The bios you solder is on the same mother board
Any u can use ! The only thing is should be more the capacity of ec
that bios ic is come from laptop not sir?
Yes it from laptop !!
Hi PLS. what is it socket model num. ? and much 2 pic. to France country ?
Contact via what’s app +91-9584145145
hello sir
what is io TimedOut on svod3 ?
it can read and can take backup but when i want program it , error is on blank check and verefy
Log
Same problem but in SVOD project Version 3
How can i solve it??
What issue ?
@@Aditya11ttt ITE is not detected
ITE is busy error while pressing read id
It’s not Svod 3 issue it’s issue with your mbd !
@@Aditya11ttt oh okay thank you 🤗
I tried soldering the bios of the same card but still it does not detect it to me
What issue
@@Aditya11ttt I can't read ITE, could you send me a photo of the adapter below where resistors go to see if mine is okay, please
Contact via what’s app +919584145145
lenovo T440 bios password...plz help
Paid service