Great video I have two 2019 Sea-Doo’s a GTX 300 Limited and a RXT-X 300 can you tell me if these will fit in my jet skis and can you give me the Part number for them Please !
Hey so just watched this is this the 12v 20 Ah “ kayak” battery from them? I didn’t see one in the lithium power site specific to skis. Also how has it been holding up I’m thinking of talking the plunge myself.
@@Soggydoggyfishing So I got mine today for my ‘18 wake pro. So the Lithium battery power battery is about 1/4” too big for the tray. Did this fit yours perfect or did you mix the tray to accommodate it?
@@Soggydoggyfishing I decided to just convert a new one over. So if any one sees this, Wake Pro 230 you will need BRP Part Number 278003473 (~ 20$) and will need some 3/16 pop rivets with a broad head to switch this over. You will need to cut the battery support to accomodate the battery size then you will need a spacer to fill in the width (I 3d printed a spacer (3/16” x 2.5” x 6 7/8”). Also talked to Will at LBP, super nice guy, and make sure that you order the High performance variant of this battery (12v 20 Ah) as this one allows a boost to start (think better CCA).
Only several inches; however, you can deploy, pause the deploy, open hatch and re stow. Ideally there would be a swivel bad allowing everything to pivot off to the side so you can do so. I think Troll Ski is working on solutions for that
What is the purpose of having 2 x batteries in parallel ? if one goes flat, they both go flat ? Why not have a battery selector switch on them, & run on battery "A" all the time and keep battery "B" as a back up ? G'Day from Melbourne Australia
Great video. Some thoughts: (1) the temperature in hull is pretty high (150-200 F). It seems exceeding the work range of most Li Batteries. Do you see any issues there? (2) When parallelizing batteries ideally they should be identical. If not there might be risk that one battery ended up often charges the other and the battery pair become less durable. Appreciate you could share your experience how it goes and if this set up lasts. Many thanks!
Great thoughts. I actually just got another lithium to replace the last lead acid so both will be the same. As far as when running them in parallel, every few months I rotate their position.
I have the same Seadoo Bilge pump on my 2020 FishPro. It's an "always on" pump so once you press the start button you should hear a constant "Bzzzzzzzzz" since there's is no float switch. Also at 6:40 I think you forgot to put the LinQ clips back in LOL
@@Soggydoggyfishing Yea, I kinda regret installing that pump. I should've installed a custom bilge pump with a switch like you see on other videos. When fishing in a spot with the engine off all you hear is a constant "Bzzzz" and it can get annoying. The only way to turn it off when accessories is on is to remove the 3 amp fuse.
@@Soggydoggyfishing Take a look at your fuse box and make sure there is a 3 amp fuse on the left side of the fuse box that's meant for the bilge pump. I tried posting an imgur link of my fuse box, but I don't think UA-cam liked it.
How is the battery working? Can you share the link to the lithium battery?
What’s the 2yr review of the lithium?
Great video I have two 2019 Sea-Doo’s a GTX 300 Limited and a RXT-X 300 can you tell me if these will fit in my jet skis and can you give me the Part number for them Please !
Hey so just watched this is this the 12v 20 Ah “ kayak” battery from them? I didn’t see one in the lithium power site specific to skis. Also how has it been holding up I’m thinking of talking the plunge myself.
I cannot say enough great stuff about them. My ski has a secondary 12 volt battery and just got another to replace it with!
@@Soggydoggyfishing So I got mine today for my ‘18 wake pro. So the Lithium battery power battery is about 1/4” too big for the tray. Did this fit yours perfect or did you mix the tray to accommodate it?
@@OctopusPrime138 mine fit perfect. Can you alter one side of the gray?
@@Soggydoggyfishing I decided to just convert a new one over. So if any one sees this, Wake Pro 230 you will need BRP Part Number 278003473 (~ 20$) and will need some 3/16 pop rivets with a broad head to switch this over. You will need to cut the battery support to accomodate the battery size then you will need a spacer to fill in the width (I 3d printed a spacer (3/16” x 2.5” x 6 7/8”).
Also talked to Will at LBP, super nice guy, and make sure that you order the High performance variant of this battery (12v 20 Ah) as this one allows a boost to start (think better CCA).
@@OctopusPrime138 noted!!!
$235 12v 20ah battery LBP
You didn’t show how to remove it
Hey are you able to open the front hatch on your ski with the trolling motor in the stowed position
Only several inches; however, you can deploy, pause the deploy, open hatch and re stow. Ideally there would be a swivel bad allowing everything to pivot off to the side so you can do so. I think Troll Ski is working on solutions for that
What is the purpose of having 2 x batteries in parallel ? if one goes flat, they both go flat ? Why not have a battery selector switch on them, & run on battery "A" all the time and keep battery "B" as a back up ?
G'Day from Melbourne Australia
I am counting that neither go flat. I am running my radio the entire time I am fishing with the ski off.
Great video. Some thoughts: (1) the temperature in hull is pretty high (150-200 F). It seems exceeding the work range of most Li Batteries. Do you see any issues there? (2) When parallelizing batteries ideally they should be identical. If not there might be risk that one battery ended up often charges the other and the battery pair become less durable. Appreciate you could share your experience how it goes and if this set up lasts. Many thanks!
Great thoughts. I actually just got another lithium to replace the last lead acid so both will be the same. As far as when running them in parallel, every few months I rotate their position.
u skipped tbe haed steps, anything holding tbe battery at the bottom? i took the strap off and the old battery wont budge
Not that i know of. Mine can right out
Hi there, nice to see you have a Boxer as well as a Fish Pro! how do you get the battery strap on & off? i can’t quite see what i’m doing? Patrick
Long time no see. Glad ypur back!!!!!!!!-
Thanks! I have a few videos to post here. How have you been?!
I have the same Seadoo Bilge pump on my 2020 FishPro. It's an "always on" pump so once you press the start button you should hear a constant "Bzzzzzzzzz" since there's is no float switch. Also at 6:40 I think you forgot to put the LinQ clips back in LOL
I left them out so my dog does not have to lay on them.
And interesting i will have to check that about the bilge. Thank you for the info
@@Soggydoggyfishing Yea, I kinda regret installing that pump. I should've installed a custom bilge pump with a switch like you see on other videos. When fishing in a spot with the engine off all you hear is a constant "Bzzzz" and it can get annoying. The only way to turn it off when accessories is on is to remove the 3 amp fuse.
@@Redwng interesting. I don’t recall ever hearing it. I need to check it
@@Soggydoggyfishing Take a look at your fuse box and make sure there is a 3 amp fuse on the left side of the fuse box that's meant for the bilge pump. I tried posting an imgur link of my fuse box, but I don't think UA-cam liked it.
Very good to know that you it can be replaced with Lithium .
nice rail
Thanks