The drill should be spinning clockwise, *not* counter-clockwise. On another note, the wobbling is extremely unsafe, I highly recommend fixing it if you’re able to.
Давно сделал себе такое, только с мехпилы, там материал-рапид а не сырое железо. Преимущесто самодельного сверла в том что делается по размеру который нужен. Сверлить обязательно шуруповертом с трещеткой, может закусить!
That's terrifying and a absolutely poor design. Not only are you stripping your drill chuck with the threads of the bolt uoure also breaking your wrist drilling a hole. Have fun explaining that to a doctor 😂. You should not be showing amateurs this kind of stuff especially because you are going to be liable since it's a instructional video. Start adding a liability info in your videos before somebody gets hurt or just stop completely. Oh by the way whole says and other drill bits are pretty cheap since they are expendable items. You pick... cost worthy reliable drill bit or a wrist breaker
Has nobody ever taught you how to measure things properly, and scribe or mark out with something more accurate than a bingo marker, that has got to be the most innacurate, rough, and downright dangerous home made "wood bit" I've ever seen, for one thing, I've never seen anybody weld so badly on such a regular basis, its that uneven and far out, each hole is oval by the time you've eventually worn your way through, thats why you wont hold the board straight on to the camera, every time you try to cut a hole with it, it jumps at least an inch from where you started, and you pretty much destroyed the chipboard back of that speaker rather than cut a hole in it, about time you packed in before you seriously hurt yourself or someone around you. Big time fail
That vídeo shouldn't be watched by any one. Extremely dangerous if you don't have a specialist accompaniment. very careful, people can get hurt easily. I don't recommend trying this at home
The drill should be spinning clockwise, *not* counter-clockwise. On another note, the wobbling is extremely unsafe, I highly recommend fixing it if you’re able to.
its wrong both edges are same side. It should b opposite
The whole thing is just dangerous and this is supposed to be a instructional video. Some innocent person is going to try this and will get hurt
Давно сделал себе такое, только с мехпилы, там материал-рапид а не сырое железо. Преимущесто самодельного сверла в том что делается по размеру который нужен. Сверлить обязательно шуруповертом с трещеткой, может закусить!
Gostei da ideia!
What kind of disk do you use to sharpen? (1:29 min)
please answer 🙏🙏🙏🙏🙏🙏🙏🙏🙏
Thank you a lot
Wish I had those 3 minutes back...
Nice tool
Nije savršeno ali radi posao i to vrlo dobro :D
What about using hole saw instead? The time (and some material) spent on making this drill bit justifies the price of the hole saw.
Exactly what I was thinking. It's just a waste of time and the end result is that the drill is wobbling.
Супер 😉👍
Nice video 👍
NICE!!!!
Дисбаланс и биение. Купи себе копеечное перьевое сверло
You have both side sharpened on the same face should be opposing faces both sides would cut on rotation.
Nice
Excelente
No corta bien porque le hizo filo al mismo lado. Debió haber filo uno al lado contrario
Why would you make something so complicated to do when you can just buy it for a cheaper price than what it cost to make.
Because we aren't all living in cities with stores, and stores aren't opened all the days.
How many days you need to hole it using your tool
Vibrator or drill?
الشغل ليس منظم بالمرة
لكن عموم الفكرة حلوة
GOOD sirrrrrrrr
nice
👍👍👍👍👍
Or.... YOU CPULD GO BUY A SPADE BIT AT ANY HARDWARE STORE!
Заточувати потрібно з різних сторін.
👍
Po cara além de ser muito mais fácil ir na loja de ferragem e comprar pronta. E além de tudo o próximo vídeo vê se afia a broca corretamente.
Best mr
Оцентровка? Не не слышал. Хочешь убить шурик, делай такие ,,самоделки,,
Muito legal e economico, mas nota-se um detalhe ela ficou desbalanceada, ,,,
That's terrifying and a absolutely poor design. Not only are you stripping your drill chuck with the threads of the bolt uoure also breaking your wrist drilling a hole. Have fun explaining that to a doctor 😂. You should not be showing amateurs this kind of stuff especially because you are going to be liable since it's a instructional video. Start adding a liability info in your videos before somebody gets hurt or just stop completely. Oh by the way whole says and other drill bits are pretty cheap since they are expendable items. You pick... cost worthy reliable drill bit or a wrist breaker
Holy shit Butcher!
Me sorprendería si este es capaz de ponerse los zapatos en el pie correcto
1:14
weld birdpoop on rust. Okay.
Has nobody ever taught you how to measure things properly, and scribe or mark out with something more accurate than a bingo marker, that has got to be the most innacurate, rough, and downright dangerous home made "wood bit" I've ever seen, for one thing, I've never seen anybody weld so badly on such a regular basis, its that uneven and far out, each hole is oval by the time you've eventually worn your way through, thats why you wont hold the board straight on to the camera, every time you try to cut a hole with it, it jumps at least an inch from where you started, and you pretty much destroyed the chipboard back of that speaker rather than cut a hole in it, about time you packed in before you seriously hurt yourself or someone around you. Big time fail
Too bad you are spot-on with that comment. the idea is good, but the finished product is ripping it all to pieces.
He almost broke his wrist and his videos dont have any info stating that he's not liable for any injuries since this is a instructional video
Super
Ek tarf ke dhar ko ulte taraf banana tha
厚木板無法使用且軸不在圓心 導致晃動
Stupid tool and for time spent making, you can buy one cheap.
Daniel H. 😂😂😂😂😂you right
Go to Home Depot.... some times
That vídeo shouldn't be watched by any one. Extremely dangerous if you don't have a specialist accompaniment. very careful, people can get hurt easily. I don't recommend trying this at home
Chac lam khó lắm
Lol the cutting edge is out by atleast 8 mm
First
era melhor comprar uma broca chata ou uma serra copo
Destrói a furadeira
Veryyyyyyy gooooooooooooddddddddddddddddddddd
@Nice
Baustahl kann man nicht härten.
Kritif buat tong spker
These tool is badly done!!!!......
It's stupid it only works for cardboard.
Todo chueco hace el agujero no me parece bueno
That looks dangerous af...
Like
Youre welds still sucks
...
TOMATE CRU
These tol is wrong!!!!!........
Not worth, it's not smooth
ok,,,.. but this is unbalancing
НЕ ПО ЦЕНТРУ (((
You nerd fix the piece.
ist eine möglichkeit
pinterest copyright
👍👍👍👍👍👍👍
👍👍👍👍