I've been thinking about doing this for a long time, and putting it off for a long time. This made it seem simple enough that I'm gonna actually do it soon. Thanks for showing your process!
Love, Peace and Chicken Grease to you too 😂 So glad I just found this video because I just bought a 25' shuttlebus today where the door motor or actuator is fggd. Now I can fix that first thing when I drive it home next week 🤗 Blessings to you all and thank you!
Love,Peace,& Chix grease!😂😂 U & JD made that look easy peasy!Thanx for sharing,that is my fav way of doing the Skoolie doors of all I’ve seen so far,I like the look of a full door with replacement doors!🥰💙
That's cool Isaac will how you did the door. If down the road I may consider a bus to convert into a tiny home on wheels after having my van conversion build into my tiny home on wheels for awhile, I'll know what can be done for the schoolie door 😊 thanks for sharing Isaac, take care, sending lots of love hugs and prayers daily to you, Jaylena and baby Ember 💖🤗💖🤗👶💖🤗
Very nice and that was my plan but my old door doesn’t want to come off 😂 I don’t want to change doors as I can look down the canyons when I drive over the mountain passes with the low windows Now you gave me an idea
"Love, peace, and chicken grease." LOL. I love that saying of yours. Great job, Isaac. I've wondered how a skoolie could make a "normal" door with what they had available.
Sorry i dont think it has anything to do with poor or being rich.Its how a hard working man can build a bus with his own hands and the determination of building with what he has.I would rather watch Issac doing a build, the having a rich person showing just the look of a bus.keep the videos c'mon🤗🤘🏼
@@sarahjones6342 it was humor dear,a general statement not directed at or to any one person but a simple question many people have pondered time over time,and remember,being rich is just a state of mind
Hey there Isaac ..where the wood across inside door could be right across n somehow fit lock in for door may not work for lock level mechinism...just wondered for nicer look however brilliant simple outfit ..i love your simplicity with a lot of what you do so peoplel such as i who arent that handy you make it easy for us..love ur work Isaac
I started my door conversion yesterday and it's going great. I have a shuttle bus with bifold doors (They open outwards) So i cut the hinges on one side, pulled out both middle rubber seals, then i drilled holes through the sides of both doors and used a couple of bolts to bring them together. They came together so nicely! (i'll probably run a bead of silicone between the seam) The problem is that of course the door opening isn't square (why would it be lol) and since i removed the rubber seals there is now a large gap. I think i can bolt a 2x4 to fill in most of that gap but then i need to build a doorframe as you did. But the top opening is probably 2x wider than the opening at the bottom. Maybe i can frame it out and then cover it all with thin sheet metal so you can't se all the shims i'm going to need.
Hey Isaac, we’re just building out our first skoolie for our family. We converted a coach bus before, but there are some significant differences, one being the door… our skoolie has air brakes, and also air to the door closure system.. it didn’t look like yours had air going to it. Have you done this to a door that had air to it?
Another great video. Not that I'm ever going to need it, but are there any special hacks for a tight seal where the two doors now meet in the middle if the rubber gaskets (?) are mangled, cracked or deteriorating so wind and weather won't seep in? Oh, and I'm crazy about your music choices.
It looks nice. Really like it. My only concern is safety. Maybe adding another deadbolt on the inside and putting some sort of protection barrier to the glass to prevent or make it difficult to intruder
Just wondering:. Can you put a metal B's ret on your folding door on the inside so it won't fold anymore and deal it first so it won't leak and then unhook one side of it do it opens as a flat door?! Put a hook on the bus and use a chain on the door to hold it open. You may want to put a screen on the door opening when you have it held open.
Just wondering:. Can you put a metal bar on your folding door on the inside so it won't fold anymore and seal it first so it won't leak and then unhook one side of it so it opens as a flat door?!
Youre a typical pinoy.Jack of all trade God Bless you and your family and I enjoy watching your vlog keep safe always you and Jaylen PS can you put sometimes the flag of the Phil in your vlog it might help
97 shuttle eco350-450 here... This is genius and simple. Ill use it. Thank you!! However, i still cant stand how LOW my step goes ... Got any genius plans to remove the 8 inches of underhang that becomes the blite of any conversion that really wants to go somewhere... yet?
How is it for vibration when you're driving? Does it rattle? Mine still has the old school bus door mechanism. I'm definitely going to make it so I can open it from the outside but I'm not sure what I'm going to do yet.
@@isaacturnerit what adjustments did you make? We followed your video for our conversion but no matter what we do with weatherstripping and latches we can't seem to get it to stop whistling at us and vibrating so much the lock keeps unlocking 😢
@@isaacturnerit we will probably try sealing with weatherstripping around the side and top edge of the door instead of on the inside of the door. More like draft protection on an exterior house door.
Pilipino Isaac, Great job on the door build. I do have questions , I didn't notice any rubber seal on the outer portions of the door . How does it do keeping out the rain and snow and also road noises from air ? Just curious or as I jokingly call it Killing cats Lol . Laterz friend - Leland
Dude!!! Yours is the best idea I've found. I didnt want different doors, but didn't want the existing door. Thank you
Is there anything you can't do?? I never tire from watching how talented you are! -Hugs 🤗
Lol I can’t weld. But one day
@@isaacturnerit Well, I'll look forward to watching!! ❤
Hi Isaac. That door looks awesome. Bart, you are a trooper to be helping out.💪💪👍👍 Take care there all. 🤗 Kiwi hugs 🚐🌏
💗💗💗💗
I've been thinking about doing this for a long time, and putting it off for a long time. This made it seem simple enough that I'm gonna actually do it soon. Thanks for showing your process!
Very nice as always good work Issac! I like how it has a sturdy and classy look.GOD BLESS YOU AND YOUR FAMILY!!!🤘🏼🙏🙏🙏💖💖💖😊😘
Thank you Sarah!
I always wondered how you did that door. How cool! Thanks
Thank you Koi!
Great job Isaac.
Thank you Paul
Love, Peace and Chicken Grease to you too 😂
So glad I just found this video because I just bought a 25' shuttlebus today where the door motor or actuator is fggd. Now I can fix that first thing when I drive it home next week 🤗 Blessings to you all and thank you!
Love,Peace,& Chix grease!😂😂 U & JD made that look easy peasy!Thanx for sharing,that is my fav way of doing the Skoolie doors of all I’ve seen so far,I like the look of a full door with replacement doors!🥰💙
Thank ya for watching :)
@@isaacturnerit I meant without replacement doors!🥰
That's cool Isaac will how you did the door. If down the road I may consider a bus to convert into a tiny home on wheels after having my van conversion build into my tiny home on wheels for awhile, I'll know what can be done for the schoolie door 😊 thanks for sharing Isaac, take care, sending lots of love hugs and prayers daily to you, Jaylena and baby Ember 💖🤗💖🤗👶💖🤗
💗💗💗💗💗
Very nice and that was my plan but my old door doesn’t want to come off 😂
I don’t want to change doors as I can look down the canyons when I drive over the mountain passes with the low windows
Now you gave me an idea
Good work has always Isaac...Bless your heart Mama Alma son🙏🙏💙...You're a good dude👍💯
Thank ya Coleen
Cool door transformation Isaac. Thanks for sharing this with us. God Bless ❤
Thank you for watching Pat
Wow that was almost to easy. Love it. Great job.
Ha ha it’s still a job. But not too bad
@@isaacturnerit ya the doors are heavy for sure. But since I don't know how to weld you made it easier to do. Thanks for sharing everything you do.
"Love, peace, and chicken grease." LOL. I love that saying of yours. Great job, Isaac. I've wondered how a skoolie could make a "normal" door with what they had available.
💗💗💗
Loved the video the door worked out good. Love your videos my friend.
Thank you Randall truly
What a cool way to do the door. I like it a lot better than the original way to open and close it. 😊❤️🙏🏻
Thank you i do too!
Excellent!!! Keep up the good work!!
Thank you!
I remember asking you about that long ago. The doors are cool but when you find out how to go from poor to rich do a video on that will ya
Ha ha ha
Sorry i dont think it has anything to do with poor or being rich.Its how a hard working man can build a bus with his own hands and the determination of building with what he has.I would rather watch Issac doing a build, the having a rich person showing just the look of a bus.keep the videos c'mon🤗🤘🏼
@@sarahjones6342 it was humor dear,a general statement not directed at or to any one person but a simple question many people have pondered time over time,and remember,being rich is just a state of mind
@@chasgs Amen!!! I totally get it.
Hey there Isaac ..where the wood across inside door could be right across n somehow fit lock in for door may not work for lock level mechinism...just wondered for nicer look however brilliant simple outfit ..i love your simplicity with a lot of what you do so peoplel such as i who arent that handy you make it easy for us..love ur work Isaac
💗
Thanks for sharing.
Thank you for watching
Great 👍
Thank you Mary!
Cool I love the door.
Thank ya!
Makes a nice and secure door Isaac!👍
💗
I started my door conversion yesterday and it's going great. I have a shuttle bus with bifold doors (They open outwards) So i cut the hinges on one side, pulled out both middle rubber seals, then i drilled holes through the sides of both doors and used a couple of bolts to bring them together. They came together so nicely! (i'll probably run a bead of silicone between the seam)
The problem is that of course the door opening isn't square (why would it be lol) and since i removed the rubber seals there is now a large gap. I think i can bolt a 2x4 to fill in most of that gap but then i need to build a doorframe as you did. But the top opening is probably 2x wider than the opening at the bottom. Maybe i can frame it out and then cover it all with thin sheet metal so you can't se all the shims i'm going to need.
Another well presented video -great job Isaac ☀️🚌👍🏻😎
Very nice as always.
Thank ya!
Thank you so much! We are definitely doing this!
Hey Isaac, we’re just building out our first skoolie for our family. We converted a coach bus before, but there are some significant differences, one being the door… our skoolie has air brakes, and also air to the door closure system.. it didn’t look like yours had air going to it. Have you done this to a door that had air to it?
Ahhhh I have never had to disconnect the air so I’m not sure of any tips. I am sorry
@@isaacturnerit no problem, I’m sure we will figure it out…..?! 😂😂
Hey I saw some cameos in there. Great video.
Ha ha yep
Another great video. Not that I'm ever going to need it, but are there any special hacks for a tight seal where the two doors now meet in the middle if the rubber gaskets (?) are mangled, cracked or deteriorating so wind and weather won't seep in?
Oh, and I'm crazy about your music choices.
The seal is great
Awesome, that was a perfect video, liked watching.
Looks great I am thinking of doing something similiar. Do you think a bead of sikaflex on the door rubber in the middle seam would be good?
As far as just fusing it?
Nice job, 🥰😍👍👏
💗💗💗
It looks nice. Really like it. My only concern is safety. Maybe adding another deadbolt on the inside and putting some sort of protection barrier to the glass to prevent or make it difficult to intruder
Intruder wants into any vehicle all they have to do is break the front or back window
That’s awesome 😎
💗💗💗
gangster bus door!
Swag!!!
Just wondering:. Can you put a metal B's ret on your folding door on the inside so it won't fold anymore and deal it first so it won't leak and then unhook one side of it do it opens as a flat door?! Put a hook on the bus and use a chain on the door to hold it open. You may want to put a screen on the door opening when you have it held open.
Hmm…should peach get a front door makeover?🤔
Swag
Just wondering:. Can you put a metal bar on your folding door on the inside so it won't fold anymore and seal it first so it won't leak and then unhook one side of it so it opens as a flat door?!
Youre a typical pinoy.Jack of all trade
God Bless you and your family and I enjoy watching your vlog keep safe always you and Jaylen
PS can you put sometimes the flag of the Phil in your vlog it might help
Thank you!
97 shuttle eco350-450 here... This is genius and simple. Ill use it. Thank you!! However, i still cant stand how LOW my step goes ... Got any genius plans to remove the 8 inches of underhang that becomes the blite of any conversion that really wants to go somewhere... yet?
Oh snap. Cut it out and weld in where ya want it?
That was really helpful. Thanks
Cool
Swag
Good Morning Beast Issac Jaylena Canada Ontario UA-cam video Mississauga Transit 🇨🇦🇨🇦🌱🌱🌱☘️☘️🌿🌿🌿🌿
💗💗💗
Your clever and awesome … now get your daughter born and start teaching her . Lol she will be a daddy’s girl . Be ready for a shadow . 💗💗💗
💗💗💗💗💗
How is it for vibration when you're driving? Does it rattle? Mine still has the old school bus door mechanism. I'm definitely going to make it so I can open it from the outside but I'm not sure what I'm going to do yet.
Used to rattle bad. But adjusted it seems good now
@@isaacturnerit what adjustments did you make? We followed your video for our conversion but no matter what we do with weatherstripping and latches we can't seem to get it to stop whistling at us and vibrating so much the lock keeps unlocking 😢
@@Harley-ht5gm oh snap! Maybe add some spaces so it’s a bit more snug
@@isaacturnerit we will probably try sealing with weatherstripping around the side and top edge of the door instead of on the inside of the door. More like draft protection on an exterior house door.
Pilipino Isaac, Great job on the door build. I do have questions , I didn't notice any rubber seal on the outer portions of the door . How does it do keeping out the rain and snow and also road noises from air ? Just curious or as I jokingly call it Killing cats Lol . Laterz friend - Leland
Works great!!
Love the look of that door. Honestly don't like house doors on a bus. Looks odd to me. 👍
I agree!
Where do you guys get your busses worked on. I’m having a hell of a time finding a local place that works on it. I have a 2001 gmc diesel short bus.
Great Tutorial. 💜💜💜 AuntieEllen
💗💗💗💗
Any ideas on how to do that but still keep the open lever I lobe the ascetic of it but still want one door
I have no idea. I would have to put some thought to that
Wow issac, you was sooo skinny! Was that dorit in the backround with gumboot
Ha ha I was!
It was Dorit!
Thank you Isaac! X's &
💗💗💗
Where y'all workin on these buses?
At my shop in Oregon
What lock did you use?
love peace chicken grease lol
💗
do you know what size c channels and bolts you used
I'm afraid someone would break the glass and unlock the door. I think I'd put a key in key out door lock.
Someone wants in anything they are in
❤️❤️❤️❤️
🥰🥰🥰🥰
💗💗💗
Not to sure what to do with my doors. It's an all glass door. Not center steel/ frame. Going to be tricky.
Oh snap
@@isaacturnerit Lmao. Right.
🙏❤️✌️👍👍
💗💗
Who was the girl in 2020 ? Dorit ??
Hey the
Pretty cool Isaac!!!!
Thank ya