For the bottom drawer, DO NOT fix the white plastic thing into the holes. Turn to later pages in your manual. There will be instructions on how to assemble the bottom drawer. Assembling a bottom drawer is slightly different from assembling the drawers above the bottom. Hope this helps!
I'm trying to put together a Smastad/Platsa child's dresser with 3 drawers like this one but I'm not sure which holes to put the rails on. The instructions give me details for if you put 3 big drawers in or 3 small drawers but not 1 big & 3 small drawers like what's on the photo (and in the above video). I even went to Ikea & counted th holes to see how they did it and my drawers still don't fit. I used the 2nd hole from the bottom for the big drawer (1st hole is too low and won't line up with the holes in the rails) then counting down from the top towards the bottom I used holes 4 & 10. The top 2 drawers fit perfectly but not the bottom one. And there's a little space between the case and the drawer as if it's too high but I can't put it any lower unless I drilled a new hole which I shouldn't have to do. The wheels were in the rails correctly so I don't know what I'm doing wrong. I even called Ikea but they just referred me to the directions that I already have. Sigh...
The big drawer has 2 different possibles construction possibilities, For the 3 Drawer with one big on bottom and 2 smaller you need to follow the second possibilities, on page 10 of the big drawer Manual. I Lost to hours of finding why the doors are not fitting. I found this this evening but my child Need to sleep, so i will change this tomorrow, and hope this will fix it. was just here to watch some tips for the door handles :P
**4 drawers of ikea smastad wardrobe**. The problem is you are not following the instructions. Lol I did the same. Just read instructions again and voila, wardrobe looks perfect. Both lower (larger drawers) needs to be assembled differently. Check instructions. I hope this helps.
Issue is that some of us didn't order off-the-shelf wardrobe but the one you put together through the planer. So in that case you just get instructions for every piece of wardrobe, not the complete instructions.
@@WeaverJohnny same, I did the same. Planner one. I bought 2 days ago. Page 10 is instructions for the lower bottom drawer. I found it in KONSTRUERA drawer flat pack.
Hi there, sorry to bother you, but do you happen to know what I could be doing wrong with the bottom drawer i.e. the larger one? The issue I have is that I think it needs to be lower down, but the runner it is on can’t be lowered any further than the second hole up on each side of the PLATSA frame. Therefore every drawer and door is a little higher than it should be and the front doors are poking up over the top of the frame, rather than being level with it. When I check the instructions I cannot see anything I’ve done wrong. :(
Hi there, sorry to bother you, but do you happen to know what I could be doing wrong with the bottom drawer i.e. the larger one? The issue I have is that I think it needs to be lower down, but the runner it is on can’t be lowered any further than the second hole up on each side of the PLATSA frame. Therefore every drawer and door is a little higher than it should be and the front doors are poking up over the top of the frame, rather than being level with it. When I check the instructions I cannot see anything I’ve done wrong. :(
@@alanmercer6557 the bottom large drawer has 2 ridges for cardboard right? 2 ridges where we can slide the cardboard. This card board will be put in the first (upper) ridge.(not on the lower ridge). Then the drawer will be put in number 2 holes and the other larger drawer at 13
Yes quality is very shitty, 4 drawers looks like doors are too big because you can't fit bottom.drawer on first hole and you must use second which moves all dravers 1 hole up mean doors are too big. Focking shit it is
why is the dude wearing a facemask? alone in a room🤣
HJÄLPA hinges on the doors don't close completely. Anyone else faced this issue?
For the bottom drawer, DO NOT fix the white plastic thing into the holes. Turn to later pages in your manual. There will be instructions on how to assemble the bottom drawer. Assembling a bottom drawer is slightly different from assembling the drawers above the bottom. Hope this helps!
Is the material made of particle board or wood?
It's starts on page 10 for me.. but if I would follow this I have a gap between the drawer bottom and the sides.. this doesn't make sense, does it?
That comment save my life ! Thank you.
너무 감사해요! 도대체 이해가 안됐어요!!
I lost 2h because of this 😂
I'm trying to put together a Smastad/Platsa child's dresser with 3 drawers like this one but I'm not sure which holes to put the rails on. The instructions give me details for if you put 3 big drawers in or 3 small drawers but not 1 big & 3 small drawers like what's on the photo (and in the above video). I even went to Ikea & counted th holes to see how they did it and my drawers still don't fit. I used the 2nd hole from the bottom for the big drawer (1st hole is too low and won't line up with the holes in the rails) then counting down from the top towards the bottom I used holes 4 & 10. The top 2 drawers fit perfectly but not the bottom one. And there's a little space between the case and the drawer as if it's too high but I can't put it any lower unless I drilled a new hole which I shouldn't have to do. The wheels were in the rails correctly so I don't know what I'm doing wrong. I even called Ikea but they just referred me to the directions that I already have. Sigh...
Me too! Did you fix this?
The big drawer has 2 different possibles construction possibilities, For the 3 Drawer with one big on bottom and 2 smaller you need to follow the second possibilities, on page 10 of the big drawer Manual. I Lost to hours of finding why the doors are not fitting. I found this this evening but my child Need to sleep, so i will change this tomorrow, and hope this will fix it. was just here to watch some tips for the door handles :P
Dose anyone got this fix my and my girlfriend are struggling so hard to fit the doors in
please if you dont mind between each drawer how many hole you keep as three drawers 8 hole or nine
My handles had 2 small holes in case you wanted to screw it on but also came with double sided stickers to use instead, which was what i did.
Did you need to drill holes on the wall to secure the wardrobe?
Good to do for safety
Most of the time they are not fixed to the wall.
Thanks for the video we were straggling to fix this wardrobe
Thank you. I hope this helps
At what number you have fitted the channel for all shelves.. any single instructions manual is there to install this wardrobe
Follower every step exactly, but the drawers are so difficult to slide in. Why ???
i have the same issue. did you figured it out?
nvm i figured it. i put the wrong rail on the wrong side
**4 drawers of ikea smastad wardrobe**. The problem is you are not following the instructions. Lol I did the same. Just read instructions again and voila, wardrobe looks perfect. Both lower (larger drawers) needs to be assembled differently. Check instructions. I hope this helps.
Issue is that some of us didn't order off-the-shelf wardrobe but the one you put together through the planer. So in that case you just get instructions for every piece of wardrobe, not the complete instructions.
@@WeaverJohnny same, I did the same. Planner one. I bought 2 days ago. Page 10 is instructions for the lower bottom drawer. I found it in KONSTRUERA drawer flat pack.
Hi there, sorry to bother you, but do you happen to know what I could be doing wrong with the bottom drawer i.e. the larger one? The issue I have is that I think it needs to be lower down, but the runner it is on can’t be lowered any further than the second hole up on each side of the PLATSA frame. Therefore every drawer and door is a little higher than it should be and the front doors are poking up over the top of the frame, rather than being level with it. When I check the instructions I cannot see anything I’ve done wrong. :(
Hi there, sorry to bother you, but do you happen to know what I could be doing wrong with the bottom drawer i.e. the larger one? The issue I have is that I think it needs to be lower down, but the runner it is on can’t be lowered any further than the second hole up on each side of the PLATSA frame. Therefore every drawer and door is a little higher than it should be and the front doors are poking up over the top of the frame, rather than being level with it. When I check the instructions I cannot see anything I’ve done wrong. :(
@@alanmercer6557 the bottom large drawer has 2 ridges for cardboard right? 2 ridges where we can slide the cardboard. This card board will be put in the first (upper) ridge.(not on the lower ridge).
Then the drawer will be put in number 2 holes and the other larger drawer at 13
greetings from Switzerland 🇨🇭😊👍
❤
I have four drawers that came with mine and I can't seem to fit it all in. It's a nightmare
It's like a closet, so I can't store a lot of drawers.
Only chests of the same series are sold.
Same with me.
Yes quality is very shitty, 4 drawers looks like doors are too big because you can't fit bottom.drawer on first hole and you must use second which moves all dravers 1 hole up mean doors are too big. Focking shit it is
@@theundertaker8273 Exactly same with mine. Awfully designed product.
@@rosiebirch1212 check my comment
Like its that easy ..
Would have liked to see how you used it and more of the inside.
thank you wery much for the video was very useful
Thank you for a good look.
Merci pour tous vos retours ! Notre porte dépassait aussi ! 😰
bonjour avez vous reussi ? hier mon mari la monté et les tiroirs se chevauchent malgré le mode d emploi..
Music not necessary, fast motion useless, you skipped many steps with the hardware I found out. A seriously flawed video.