none.. one little issue is that you feel slight heat on your legs because the elbow pipe is near to you but other than that no problem at all.😊😊 it cost me almost 10k..😊
Great guidance bro. I’m from India and I own a 2021 390 duke and the bend pipe with cat con goes underneath the engine making the ground poor. This video guided me a lot toh uninstall the old and and to install the new one but now the problem is where can I get that old duke’s exhaust system 😢
Bro I am abouT To insTall duke 390 bs6 dholki and side exhausT on my duke 200 so my quesTion is did you ever faced a problem aFTer PuTTing Full sysTem on your bike ? Please do reply
@@avtfilm23 u need to removed that metal part which is attached below the engine ...It was given as the ben pipe was going below the engine ..U can remove it as in the earlier models its not present and will increase the ground clearance
pwede naman bro kaso lang maraming adjustment gagawin mo kasi mag iba yung chassis sa V1 at V2 pati yung mounting sa Resonator/ yung sa Catalytic mag aadjust ka pero kaya naman may nakita akong video.
@@avtfilm23 parehas me maitim na balak! Kasi alam mo naman sa NCR pre, minsan mattyempo ka talaga ng check point e pag makitang stock muffler edi solb! Sabay pag long ride saka palit ng pipe ulit HAHA
It's just a trial and error approach. i find that the duke200 and 390 bs6 models have the same chassis That's why it fits perfectly. yet i have to do some minor adjustment to the elbow since the one that i buy online is short and the elbow flange of Duke 200 has 3 holes while the Duke 390 have 2 holes that's why i fabricate the flange.
opo sir, plug and play na po yan. yung sa elbow naman po may kunting adjustment lang kagaya ng flange niya kasi sa stock ng duke 200 tatlo yung butas , tsaka medyo maiksi yung elbow na nabili ko sa lazada kaya pina dugtungan ko sya. other than that wala nga problema sir.
@@avtfilm23 brother you had installed bs4 duke 390 stock full system ... I need bs4 duke 390 stock full system exhaust.... Same i had duke 200 bs6... Brother can you probide me bs4 stock 390 full exhaust system....... I m from india bro.....
i dont think i can provide you a BS4 stock 390 full system because i just get mine in an Facebook who sell his old Duke 390 exhaust system just because he upgrades his exhaust system. sorry brother. try to see in facebook page "KTM Buy and Sell"
Ok brother please install akrapovic Slip on exhaust in bs4 stock exhaust ....... I want to see how its sound .... Other wise remove db killer ktm oem stock exhaust
yung pinaka axle ng exhaust po boss. inalalayan ko lang ng ko lang ng pagpokpok para bumaba. ginamitan ko lang ng open wrench para di mag slide yung pag palo sa axle.
s.lazada.com.ph/s.VjXyS i momodified mo pa sir yung flange nya kasi iba sa Stock ng Duke 200 BS6 tapos medyo maiksi kaya kailangan pa e-extension ng maliit para lumapat .
I was hoping for this type of video from years ❤️💯 nice content 👍
thank you sir.🥰
Any problem after installing this sir?
And how much it cost?
none.. one little issue is that you feel slight heat on your legs because the elbow pipe is near to you but other than that no problem at all.😊😊
it cost me almost 10k..😊
@@avtfilm23 ohkk thanks for the kind information
Take the DB killer out of the exhaust which makes more bass
Great guidance bro. I’m from India and I own a 2021 390 duke and the bend pipe with cat con goes underneath the engine making the ground poor. This video guided me a lot toh uninstall the old and and to install the new one but now the problem is where can I get that old duke’s exhaust system 😢
welcome bro.
This is what I was finding 🔥great
thank you😊
@@avtfilm23 can u tell me the price of exhaust system I also want to put in my rc 200
nice content idol..pa shout-out nman po sa next video😁👍
ahaha
thank you po lodi.
okey po lodi shout ko po kayo sa next video ko😁👍👍👍
sana headlight din na pang duke 390. hehehe rs sir.
Best video in yutube 🔥
Tune up dapat yan.. anganda na nga ng exhaust e pinalitan pa..
Make a video on installation of bs4 duke200 silencer with bend pipe in duke 200 bs6 full video
Please 🙏
Thank you
Is the header pipe diameter same? Did they fit seamlessly or did you have to tinker?
Nice video..
How much did the upgrade cost, where did you get the parts from and do you have a link to buy from.
ang galing mo po koya.. idol po kita 😘
thank you po sir.. mas idol po kita.hehehe🔥🔥🔥
Bro form where did u buy the stock exhaust i wan't to buy and fit in my 200 duke
Bro I am abouT To insTall duke 390 bs6 dholki and side exhausT on my duke 200 so my quesTion is did you ever faced a problem aFTer PuTTing Full sysTem on your bike ? Please do reply
as of now bro i didint face any problem since i installed duke 390 bs6 full exhaust system. its almost 2 years since i installed it.
@@avtfilm23 okay bTW Thanks for The reply
Nice video bro
thank you boss😍
Sir baka pwedi nyo rin ma try ang headlight assembly ng Duke 390 para may idea din ako.Proud Duke 200 owner din kasi ako.
Sana po ma notice😁...
Nice, Where to buy stock exhuast 390 bro?
grabe naman. ang galing siiir! kudos
thank you sir. 😍
390 exhaust loud and bassy 🔥
thank you sir.🔥
Great guidence ❤️👍🏻
thank you bro❤️
Boss may dinagdag kapa need pyesa or auto Plug and play na Yan ?
What is the price of this 390 exhaust i want to fit in my duke 200
Nice content keep it up 💜
thank you ❤️
Bro which bend pipe do you used in this and how u connect bendpioe and Cat
Can you plz😢 explain
Full rpm sound
Sound is same like before...if u would have changed the silencer of bs4 then the ground clearance of the new Duke 200 bs6 will be increased...
Bro is the bent pipe is of the stock duke 390
Tuteli Kitna rupya lagega 390 ka ful system exhaust lagane per
Just got a 2021 Duke 200. Can I use any exhaust made for the Duke 390, or do I need something else? Can't find anything for the 2021 Duke 200.
same
did u find any alternative bro
Full set exhaust price ?
cost me $210
Nice
thanks bro.
What about mailage before and after?
Ban pipe price ? And where did you buy from ?
Please upload the ground clearance bro🙏
ground clearance still the same.
@@avtfilm23 u need to removed that metal part which is attached below the engine ...It was given as the ben pipe was going below the engine ..U can remove it as in the earlier models its not present and will increase the ground clearance
Wow
Plug and play na bayan boss?
how is the experience with this system bro
Nice concept
thank you sir👍👍
Wow nice ..duke..pogi
salamat po 😅
Ako na naka duke 390 pero gusto ang underbelly pipe😅
Nice brother
thank you brother.
Ye order kha se kiya bro
Nice video bro. Tingin mo pwede kaya sa Duke 200 V1 yan?
pwede naman bro kaso lang maraming adjustment gagawin mo kasi mag iba yung chassis sa V1 at V2 pati yung mounting sa Resonator/ yung sa Catalytic mag aadjust ka pero kaya naman may nakita akong video.
@@avtfilm23 iniisip ko kasi bro ganyan ikabit sa Duke ko para palit lang ng rear pipe para pwde mag slip on pag trip hehe
kaya nga, parehas pla tayo.ahaha
@@avtfilm23 parehas me maitim na balak! Kasi alam mo naman sa NCR pre, minsan mattyempo ka talaga ng check point e pag makitang stock muffler
edi solb! Sabay pag long ride saka palit ng pipe ulit HAHA
oo pwedeng pwede yan bro. tska di naman sinisita yung sa Duke 390 na full stock kasi Orkigina din naman sa KTM tska di open pipe kaya walang problema.
What about mileage brother?
Where I can get this product? Link plz.
saan ka nka bili po ng exhaust system ng 390?
sa facebook page ng KTM duke buy and sell.
Exhaust full system aviduna purchase chythe
😻👾👍💫💫
Please make a without exhaust video it can be shorts too please 💔
okey 👍
i will make a video for that.👍
Please can u upload today coz im thinking too fit in my bike mine is bs6 duke250
Super. Bro❤️❤️❤️❤️❤️❤️
thanks bro👍
Namber send bro
Is that direct fit?
how did you bought full exhaust for 390 ? with that catalytic convertor ?link plz
I just bought it online. bro.
Yung stock exhaust system mo ng duke 200 baka binibenta mo, bilhin ko sana..
pm kita sir. ano fb mo.?
Make video of slip on exhaust
Put akraprovich
soon sir🥰
Bro where did you buy that catalytic converter
just got on KTM buy and Sell Facebook page.
Take of the db killer it sounds amazing
planning to do that in the future.👍
Price of exhaust
Pwede ba bro sa version 1 ng duke200 yang exhaust ng 390 tnx
pwede naman boss kaso lang mag aadjust kalang sa mount ng Catalytic kasi iba yung mount ng chassis sa V1 at V2 na model.
Boss baka pwede mo po ma share yung store na nabilan mo online
facebook lang boss sa mga facebook groups ng KTM duke buy and sell lang ko nakita boss.
Price ?
This is what I was finding
Stock ng version na 390 Yan bos?
Sir buy link please
Good day sir saan po kayo naka bili? pwede pa share po ng link?
sa facebook ko lang po nakita. sa KTM buy and sell na page.
Magkanu mo n kuha boss full system ng 390 exhaust po?
Bka bnbenta nio po ung exhaust nio n stock ng duke200
6k ko lang po boss nakuha ying full exhaust system . tas 1.6k naman yung elbow..
Wla nmn po nging problem sir
Npansin ko po parang my upi ung elbow ng 390 cnadya nio po p un para magkasya o nbili nio my ganyn n
@@markpolanes3253 wala naman.
@@markpolanes3253 ganyan na sya nung nabili ko. tiningnan ko sa stock ng 390 parehas lang sa stock may yupi para di tumama sa chassis ng motor.
Is it harmful for the engine??
no its not.
🎉Amaizing
How did you find out duke 200 bs6 can be fitted with duke 390 bs4 exhaust ?nice mods 🎉❤.does it fit perfectly or any adjustments needs here
It's just a trial and error approach.
i find that the duke200 and 390 bs6 models have the same chassis That's why it fits perfectly.
yet i have to do some minor adjustment to the elbow since the one that i buy online is short and the elbow flange of Duke 200 has 3 holes while the Duke 390 have 2 holes that's why i fabricate the flange.
You don't get that much sound ,,just remove catalytic converter inside the bend pipe
HM nagastos mo paps ?
Plug and play ba to sir?
opo sir, plug and play na po yan. yung sa elbow naman po may kunting adjustment lang kagaya ng flange niya kasi sa stock ng duke 200 tatlo yung butas , tsaka medyo maiksi yung elbow na nabili ko sa lazada kaya pina dugtungan ko sya. other than that wala nga problema sir.
Bro mujhe bhi Duke ka exust system cahiye
Bro milage
8,000 milage bro👍
Bhai mere ko bhi karna hai Kolkata me posible nai
How much many cost bro ❤️
got it for 117.41 USD
Bro what's that tank type calls
what tank type?
Kaya price me mila
How did you got 3 hole flange in header pipe?
i trace the stock flange and made a new one.
Wala bang sabit kahit saan yung elbow
wala po boss.
@@avtfilm23 san ka nakabili ng full system
Bs4 duke 390 full system stock exhaust available
you will do some adjustment on the catalytic because the chassis of BS4 is not the same in BS6 model.
@@avtfilm23 brother you had installed bs4 duke 390 stock full system ... I need bs4 duke 390 stock full system exhaust.... Same i had duke 200 bs6... Brother can you probide me bs4 stock 390 full exhaust system....... I m from india bro.....
i dont think i can provide you a BS4 stock 390 full system because i just get mine in an Facebook who sell his old Duke 390 exhaust system just because he upgrades his exhaust system. sorry brother. try to see in facebook page "KTM Buy and Sell"
Ok brother please install akrapovic Slip on exhaust in bs4 stock exhaust ....... I want to see how its sound .... Other wise remove db killer ktm oem stock exhaust
Without exhaust sound please sir
will see..
Boss patulong nmn saan po yong pinupokpok mo Jan tigas Kasi Yan tanggalin
yung pinaka axle ng exhaust po boss. inalalayan ko lang ng ko lang ng pagpokpok para bumaba. ginamitan ko lang ng open wrench para di mag slide yung pag palo sa axle.
san po pwde makabili full elbo 390
s.lazada.com.ph/s.VjXyS
i momodified mo pa sir yung flange nya kasi iba sa Stock ng Duke 200 BS6 tapos medyo maiksi kaya kailangan pa e-extension ng maliit para lumapat .
Price ❓
got it for 117.41USD👍
@@avtfilm23 how to buy
Subscribe..Done
thank you sir🥰