You need to find where the satellite is located on the arc (Name of satellite - perhaps its listed under an old name) and program the desire frequency provided by your satellite service. So locate and find the satellite that you are looking for than proceed to program. ( Satellite name> LNB type> Freq>Symb rate> Pol then search.) Make sure that you are on the West satellites and not on the East satellite list.. Make sure that you have the correct LNB freq. programmed in.
5 week battery test. After letting the Trimax SM-4500 sit for 5 weeks we took the meter out to do an alignment. The good news is that the meter had full battery and performed for 45 minutes without loosing a bar on the meter indicator. We left the meter on for 45 minutes on purpose for this test. I am very impressed with this feature, I had my 3500 sit for 2 days and barely have enough battery to do one install before having to charge. Visit our website to purchase your own Trimax SM-4500.
I have great news about the Trimax SM 4500 DSF with spectrum analyzer. After a week of not using the meter I bench tested the sm 4500 to see how the battery was doing. The test bench conclusion: Battery showed fully charged that's was a plus and after 10 minutes of operation the battery showed full. As you know all of the satellite finders consume battery just sitting. My SM-2200 will go dead in just 2 days and my sm-3500 will do the same, but not with Trimax SM-4500
how do you restore the western satellites to the Matrix 4500 I inadvert press the factory restore button and the eastern satellite came up instead of the western any help would be appreciated.
You need to find where the satellite is located on the arc (Name of satellite - perhaps its listed under an old name) and program the desire frequency provided by your satellite service. So locate and find the satellite that you are looking for than proceed to program. ( Satellite name> LNB type> Freq>Symb rate> Pol then search.) Make sure that you are on the West satellites and not on the East satellite list.. Make sure that you have the correct LNB freq. programmed in.
5 week battery test. After letting the Trimax SM-4500 sit for 5 weeks we took the meter out to do an alignment. The good news is that the meter had full battery and performed for 45 minutes without loosing a bar on the meter indicator. We left the meter on for 45 minutes on purpose for this test. I am very impressed with this feature, I had my 3500 sit for 2 days and barely have enough battery to do one install before having to charge. Visit our website to purchase your own Trimax SM-4500.
I have great news about the Trimax SM 4500 DSF with spectrum analyzer. After a week of not using the meter I bench tested the sm 4500 to see how the battery was doing. The test bench conclusion: Battery showed fully charged that's was a plus and after 10 minutes of operation the battery showed full. As you know all of the satellite finders consume battery just sitting. My SM-2200 will go dead in just 2 days and my sm-3500 will do the same, but not with Trimax SM-4500
how do you restore the western satellites to the Matrix 4500 I inadvert press the factory restore button and the eastern satellite came up instead of the western any help would be appreciated.
how to program this unit sm 4500 to canadian starchoice program??? step-by step, Always come back the program not found??
Árpád
Pls where can i buy the trimax sm4500 meter? Im in nigeria
hey dos this work for both C and Ku bands?
Yes! It does.
I've had them working side by side and I didn't notice that much of a difference really.
Dvb-S2 ?
Yes!