How to Connect and Control an Arduino From Python!
Вставка
- Опубліковано 20 сер 2024
- Check out my follow up video 'How to Make GUIs in Python for Arduino' Here! • How to Make GUIs in Py...
Controlling an Arduino from Python could be super useful for a wide variety of applications and using the serial control method we can easily do this in just a few lines of code! All code in both python and the Arduino IDE needed are here: github.com/ple...
And don't forget to leave a like, subscribe to the channel, and comment what you want to see next!
Consider becoming a super supporter of the channel at my Patreon as well!
/ lemastertech
Thanks for watching and goodluck with your projects!!
Thanks for making this tutorial. This is a great generic parser to implement for most projects to easily add microcontroller sensors to l your python program
Thanks for watching! That was my hope in making it for sure!
Thank you very much for sharing this video.Very useful and just what I needed for some future projects using Raspberry Pi , Arduino, ESP32.Never done serial port programming in Python before.
You’re very welcome thank you for watching!
Thanks for making this tutorial! It was super helpful and well explained!
You’re welcome thank you so much for watching!!
Thank you for your time and dedication to making this video. For me it was excellent, fast and direct. Your video helps me with a project that I want to do in which I use a muscle sensor in which if the muscle sensor is activated it turns on a green LED. and when it stops receiving signal it turns off. Hopefully you can make an example of what I intend to do. Thanks for help and time.
Hi that’s an interesting application! Do you have a specific muscle sensor already specified and picked out yet? If it outputs a digital on/off signal it should be pretty easy to do but it will depend on the sensor!
Thank you very much for your video! it helped me a lot!
Thank you for watching!! Glad it helped
Really helpful. Thanks a lot! :)
You're super welcome, thanks for watching!!
bro your so cool i will tell about you to all my programmer friends
Hey thank you so much haha!
Hi
Bit late to the party but I only just found your channel.
NEVER used Python but I hear that it is rather powerful so I will be going "hermit" to test it out and learn it.
Have a few questions about both Python (and Arduino running GRBL but that is for later)
1) Can Python run on "old" 32 bit Windows systems? - eg. WinXP, Win7 32bit.
2) Can Python use the USB port to connect to the Arduino?
3) Would it be possible to retrieve a file from a storage device? eg. A G-Code command list file from a HDD or memory stick.
4) I assume that parsing strings is an easy standard function so parsing the input should be easy (in PHP it was VERY EASY)
5) Then can I forward the commands to the Arduino so that GRBL can do its thing?
6) Would Python be able to receive and handle returns from the GRBL on the Arduino and branch accordingly?
I am assuming that the answer to all these things is probably a resounding YES.
Now why am I asking?
I need to control a CNC Router and the only PC I have is AT BEST an OLD HP Notepad that is happy with XP but can handle Win7-32bit with a LOT of coaxing.
My aim is to write my own 32bit friendly version of GCodeSender that runs well on really old 32bit Windows machines because the only available versions that will INSTALL EASILY are all 64bit.
To run 32bit it needs libraries that Microsoft no longer gives you and when you go to alternative source web sites my Anti-Virus has heart attacks. (I listen to my Anti-Virus software)
And just by the way, there are A LOT of people out there with the same problem that I have - ESPECIALLY us pensioners.
So, its off to install Python for me and I hope you had a good Easter weekend.
Hi this is a really cool project idea and the answer is definitely yes to all the questions but honestly 1-4 seem easy, but it’s 5 and 6 I’m not certain on as I haven’t done that specifically myself but doesn’t seem crazy!
Yeah but can u program an entire humanoid robot just using the arduino? With 10's of thousands of selections and options off of just one loop alone?? Like robocop?? And also anyone that wants to build robocop with me hit this up if you can code or want to be part of the team. Thx!
lol this is easily one of the best comments I’ve ever gotten on a UA-cam video and I can honestly say I don’t have the time or knowledge to help you build robocop but I sincerely wish you all the best 😂
"DomusOperandi - Automação Residencial com Arduino", on UA-cam.
No robocop but something like.
Thanks so much bro!
You’re welcome thank you for watching!
As far as I know both C++ & Python are used for Arduino.
My guess would be that C++ gets the speed advantage but for prototypes it probably doesn't matter.
I don’t believe the arduino IDE natively supports Python programming unless I’m not aware of that setting!! I thought generally you had to do base level setup on your arduino in their C++ format?
@@lemastertech Yea, I think you're right.
There's like a translation layer from what I understood.
Because of many Python Arduino projects here I thought the connection is "official".
Nowadays everything except my fridge can run Python ;)
Weird situation, it appears when I run from arduino, both LED's immediately just turn on from start. This occurs from coding it myself and using your github Pyduino code...
only difference is that I made the Python portion first before the Arduino...
Hi, this could be resolved probably by just writing LOW to both LED pins in the setup code? Is it when the arduino first powers on or when the python program first connects to the board?
Thank you very much for enlighten me with use of Arduino and Python, a misconception has been broken, my coursemate( who is a scholar to be precise) told me it is not possible to control arduino with python.
I have a question.
Is it possible to upload a python code on arduino memory such that it will be acting based on the python code.
I have project which I will be working with both arduino and python, can please help me out.
Hi - the newest arduino boards can run a very lightweight version of Python, up until this point because arduino’s run on C++ based code it hasn’t been very possible to program an arduino with Python
@@lemastertech So there is low probability that Python Program will work on Arduino.
I also have another question, like the Arduinos that support lightweight python codes, is it possible to for the Arduino to upload python codes in its memory.
@@lemastertech I have a final year project I am working that involves both Arduino and Python.
Please I want to know if you can please guide me on it.
how the program upload to arduino board?
Hi, how to program what to an arduino? Using relays you can just program an arduino like any other program!
How to command the Arduino to read a connected sensor and send the information back to the Python program???
Hi that’s just reading serial data! You use serial.print() commands in your arduino IDE and then your python program just needs to listen for serial data!
@@lemastertech How do I do that in Python? (Without causing the Arduino to reset every time I try to open a serial connection on the Python end?) NB I will probably be trying to do this on Ubuntu, or possibly RPiOS.....??? (Linux either way.)
Thanks man.
You got it thanks for watching!
hi great tutorial.I want to make a project that is controlled with python and arduino.basically the arduino talks to python to do something and then after finishing the job the python programs talks to arduino via serial to do something and after arduino job is done the arduino sends a word via serial to python and the loop continues.this requires 2way communication between python and arduino.would you give me some tips how to do this.thank you
I think a read and write tutorial would be very useful between Python and arduino I can for sure try making one soon thanks for the suggestion!
Thank you so much
You’re super welcome thanks for watching!
Getting an "access is denied error". Any idea what could be causing that?
Almost certainly this is because you still have the arduino ide open! Can’t connect to two sources at once :)
Is there a way to make this faster? When I enter "ON" it takes like half a second before it registers. Is there a way to make this significantly faster?
Hi do you just mean it’s slow to start or even slow while running? It should be very responsive while running is there are chance you’re running this on an older computer?
So should I buy a arduino uno dev board and a light; can I use it with roboflow objects detection im new sorry?
That’s a good idea for a cool
Project! You can use any Python packages you want and just send data back and forth from the arduino when you need to control the light or read sensors in!
@lemastertech 🤣 chief i have no clue how to do that im only good at mechanic . I'm searching yt for a code like that tho
Very Great.
Thank you!!
My Arduino resets instead of reading the serial port.
You mean when you run the python program it never populates you with options for serial ports, or once you select your port it never reads data?
@@lemastertech I mean when I send the data to the serial port with Python, my Arduino resets. It just doesn't work but I guess my device has some issue.
How to create simple GUI with Arduino uno and python?
Man I was going to ask the same
This is a great question and I’d recommend using a simple PyGame or tkinter gui and then the same backing code as this video shows - I can make a video on it soon!
@@lemastertech please brother, actually I tried doing it by myself for 2 quiz buzzers but it isn't detecting the COM and showing the result in GUI
how to apply this on ANPR system?
High are you talking about a plate recognition algorithm?? It depends on the output of data you get from that system, it might just be simple serial data but it might be more complicated than that!
@@lemastertech Yes I was talking about plate recognition. Can you please explain more on that?
I am lost Idk where should I connect each cabel and resistor
You make an arduino project like normal then use a serial cable to connect a regular computer to your arduino board. Don’t think you need to do anything special with a resistor
@@lemastertech yes that's clear, my issue where should I plug each cable and light, ad I'm very beginner, if you can share a picture of how they should look like I would appreciate it, because the picture that was in the video is not clear for me
Hey, Can you turn this into a GUI. For example using Tkinter? And also can you make a tutorial out of it if possible? Thanks!
Yes you can and I am working on a tutorial on that right now and will likely have it out this week on the channel! I’ll probably use PyGame but it would work the same using tkinter just a little difference syntax!
@@lemastertech Ohh okay... but is it possible to send data input from arduino to python? for example, i want to send photoresistor value on python and use the value to do certain things in the app?
hey loved the video! but i am getting this error can you help me out?
this error has come due to .open() function
self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: 'COM14201'
During handling of the above exception, another exception occurred:
Hi sorry I have not seen this before - are you using a Mac? I did mine on a PC maybe there’s an OS difference is hitting com ports??
thanks! yeah i am using a Mac@@lemastertech any suggestions how to fix it?
raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg))
serial.serialutil.SerialException: [Errno 2] could not open port COM14201: [Errno 2] No such file or directory: 'COM14201'
why is it treating COM14201 as a file? maybe thats the problem?
btw the best video on this topic thanks man
appreciation it!!You have gotten a new sub
Awesome video but is there a way you send information from Arduino to python?
Hi yes there is! The difference is just basically serial.read versus serial.write - the difference is using either transmit or receive from the arduino but it’s capable of doing both!
Can you do something with raspberry pi or with a game engine?
Hi! Sure I can do you have a project in mind or a preferred game engine?
i want a community to join
please
Like a LeMaster tech discord or something specifically about Python and arduino connections?
@@lemastertech yessssssssssssss
Why do you not use micropython??
It took 20 lines of code to do from scratch and is very useful to know how to control stuff via serial!
I think I will stick with Arduino it's easier.
I actually think arduino memory is the main reason you’d want to be able to write a python script though, you’ll find large projects or complicated functionality can’t run very well on the limited memory that comes with arduino so writing computer based scripts for more advanced functionality is very useful!
I found this a bit hard tbh
Was it because I didn’t explain it well or just a confusing concept in your opinion??
I reckon it has to do with my understanding of the concept, need more time maybe, but still could u go even further and make oversimplified guide on this with more details on each element maybe 😅
Just get raspberry pi instead
Why did you watch this video if you didn’t want to know how to do this with an arduino?
I didn’t.
@@lemastertech I didn’t
Any one got this error ile "c:\Users\hp\Desktop\HASNAIN\ard.py", line 21, in
serialInst.open()
File "C:\Users\hp\AppData\Local\Programs\Python\Python312\Lib\site-packages\serial\serialwin32.py", line 64, in open
raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM6': PermissionError(13, 'Access is denied.', None, 5)
Same here
This usually means you still are using the arduino in the arduino IDE! Two programs can’t access the same serial port at once!
This usually means you still are using the arduino in the arduino IDE! Two programs can’t access the same serial port at once!