I have a question I was hoping you might be able to answer for me. How do you completely shut down the reactor, is it just everything in reverse? Or dose it have its own set of things you have to fallow?
to get the reactor in a shutdown state, reactor temperature must be below 50C, and reactor pressure must be at 0kPa. i don't know the exact steps, but it would be something along these lines: - bring reactor thermal power down to 10% - disconnect bus B, and use power from the startup transformer rather than the turbine generator - trip the turbine - fully insert control rods - a few other things probably - enable offline cooling pumps - wait for temp to cool down to below 50C
in the server configuration/event panel it says that unit 2 is a self-circulating reactor while in the guide it says when u turn the reactor setpoint to 30 that u should use circulation to control the reactor further more however it also says that it counts only for stable and classic type of reactor
There's also something else where the Panel is, and that is a Note which says the following: "Refer to reactor type guide on the wall in Unit #1" means, both Reactors are Classic which is the standard in this game.
The new reactors are different, I have been trying to get the reactor to start up, so I can start producing steam for the vacuum, but the new reactors have a new way to start up reactions. this guide no longer works,
I should be able to figure out how unit 2 works If I understand the concept, yet on start some of levers dont turn. I know its because Im out of order.
![[V1.4.4] Realistic Boiling Water Reactor Simulator RBWR: do you think this update is good? - Roblox](http://i.ytimg.com/vi/i6sHkcZviC8/mqdefault.jpg)
![[V1.4.4] Realistic Boiling Water Reactor Simulator RBWR: do you think this update is good? - Roblox](/img/tr.png)
![[V1.3.9] Realistic Boiling Water Reactor Simulator: RBWR moments in Unit 2 - Roblox](http://i.ytimg.com/vi/HwenmZuZQrA/mqdefault.jpg)
I have a question I was hoping you might be able to answer for me. How do you completely shut down the reactor, is it just everything in reverse? Or dose it have its own set of things you have to fallow?
to get the reactor in a shutdown state, reactor temperature must be below 50C, and reactor pressure must be at 0kPa. i don't know the exact steps, but it would be something along these lines:
- bring reactor thermal power down to 10%
- disconnect bus B, and use power from the startup transformer rather than the turbine generator
- trip the turbine
- fully insert control rods
- a few other things probably
- enable offline cooling pumps
- wait for temp to cool down to below 50C
Something like that
all i do is bring thermal power down to 0% and turn on offline cooling pumps and isolation
in the server configuration/event panel it says that unit 2 is a self-circulating reactor while in the guide it says when u turn the reactor setpoint to 30 that u should use circulation to control the reactor further more however it also says that it counts only for stable and classic type of reactor
There's also something else where the Panel is, and that is a Note which says the following:
"Refer to reactor type guide on the wall in Unit #1" means, both Reactors are Classic which is the standard in this game.
It says on server configuration that unit 2 is self circulating
@@norbert099 in the new version of the game, unit 2 is self circulating and unit 1 classic, also unit 2 has changed a lot
I myself never use steam valve usually before reactor actually starts building up any pressure.
Ty
I hope it helped you
epic video
The new reactors are different, I have been trying to get the reactor to start up, so I can start producing steam for the vacuum, but the new reactors have a new way to start up reactions. this guide no longer works,
You mean Unit 2? Because the Game description says that Unit 2 has been revamped.
Good news, I figured out how to start Unit 2... but man, that took some time.
Should I Stream or just make a video?
I should be able to figure out how unit 2 works If I understand the concept, yet on start some of levers dont turn. I know its because Im out of order.
I wish there just was a instructional video on how to activate U2 that's updated, and its sad to see that your the only one providing them.
I have uploaded a video on the new U2 Controls.
I hope it helps.
Why I cant set on 5 % of power
They have changed the Controls for U2.
Pls watch my latest vid.
Cringe
?