TQ for providing good information for choppers with long pimps back hand rubbers. Could you suggest me the forehand rubber to play good spin chopping as well as to attack the opponents. Hope to get your suggestions soon.
@@sudarshanpeketi8768hi there Really sorry for such late reply. Some how I passed your comment. On my begging I used thin rubbers 1,5-1,7 mm. But eventually a realized that thickness must be at least 2,0 mm. I didn’t try a lot of rubbers but can recommend Tibhar evolution series EL-P
@@PedroHenrique-to9en for beginner this pips could be difficult. I think better variant could be curl p4 or feint long 3. After you learn how to play with it you can switch to p1v MX-P might be little bit faster for beginner. Try EL-P
@@PedroHenrique-to9en if you are beginner the best will be 0,5 After you improve your defense skill you can try 1,5 I’m using 1,5 But sometimes it difficult to control
Hey man! Have you found any other option for replacing the TSP version? I have to change my last TSP rubber but I’m hesitant to try this Victas version… Great content!
Hey! Thanks Andreas) Nice to see you in our channel) I think with your technique this pips will be great choose for you After 6 or 7 training I found this pips not bad. But notice that it’s little bit different than old Curl p1r I had to try tibhar grass dtecs but in my country began wars I I don’t know when I could try it In witch thickness do use curl p1r?
@@TTBrothers_ My thoughts and prayers for you and your country in this ongoing war. Thanks for your reply, I use 1.5mm. I'll give the Victas version a try and hopefully it suits my playing style.
I have some questions. Is it easier to chop with P1 than with grass d tecs at 1.2 sponge thickness? And can you attack close to the table with P1 at 1.0 sponge thickness?
Hi! Chopping with p1r is a little bit difficult because of sponge 1,5 mm. I didn’t test grass (but I will). Everything as I know about grass that it has bigger speed. About attack. Yes you can. You only maybe have too correct your technique. However as I figure out during all my decencies experience you can attack with any sponge thickness.
Отличаются. Эти немного мягче и не такие опасные как старые р1r. Это сугубо мое мнение. В этом видео я наверное немного поспешил с выводом, что это плохие шипы. Они не плохие, но они другие немного
Hey there ! Just found your channel, very informative and nice compilation of defence videos which I’m looking to dive into 👍😊
Thanks a lot!
Wellcome to my channel:)
TQ for providing good information for choppers with long pimps back hand rubbers. Could you suggest me the forehand rubber to play good spin chopping as well as to attack the opponents.
Hope to get your suggestions soon.
@@sudarshanpeketi8768hi there
Really sorry for such late reply. Some how I passed your comment. On my begging I used thin rubbers 1,5-1,7 mm. But eventually a realized that thickness must be at least 2,0 mm. I didn’t try a lot of rubbers but can recommend Tibhar evolution series EL-P
Thank you Brothers... Could you tell me the blade too pls? And the thickness of the MX-P?
Blade - butterfly defence alpha
Thickness of MX-P is 2,0 mm
is it good with diode v?
do you think victas p1 matches donic defplay senso v3? (And mx- p)
This pips is really not bad. I think yes
@@TTBrothers_ i play tt 5 months, i really like the defensive style, do you think its a good setup for beginner defenders?
@@PedroHenrique-to9en for beginner this pips could be difficult. I think better variant could be curl p4 or feint long 3. After you learn how to play with it you can switch to p1v
MX-P might be little bit faster for beginner. Try EL-P
@@TTBrothers_ Thanks for the information, I will definitely test!, what is the best thickness to play medium and long distance 0.5 1.0 1.5?
@@PedroHenrique-to9en if you are beginner the best will be 0,5
After you improve your defense skill you can try 1,5
I’m using 1,5
But sometimes it difficult to control
Hey man! Have you found any other option for replacing the TSP version? I have to change my last TSP rubber but I’m hesitant to try this Victas version…
Great content!
Hey!
Thanks Andreas)
Nice to see you in our channel)
I think with your technique this pips will be great choose for you
After 6 or 7 training I found this pips not bad.
But notice that it’s little bit different than old Curl p1r
I had to try tibhar grass dtecs but in my country began wars I I don’t know when I could try it
In witch thickness do use curl p1r?
@@TTBrothers_ My thoughts and prayers for you and your country in this ongoing war.
Thanks for your reply, I use 1.5mm. I'll give the Victas version a try and hopefully it suits my playing style.
@@andresrafael1621 Thanks
Hope this horror end soon
I think this pips fit for you
I also used 1,5 mm
Could you make video about this pips?
@@TTBrothers_ sure, I will
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
I have some questions. Is it easier to chop with P1 than with grass d tecs at 1.2 sponge thickness? And can you attack close to the table with P1 at 1.0 sponge thickness?
Hi!
Chopping with p1r is a little bit difficult because of sponge 1,5 mm. I didn’t test grass (but I will). Everything as I know about grass that it has bigger speed.
About attack. Yes you can. You only maybe have too correct your technique. However as I figure out during all my decencies experience you can attack with any sponge thickness.
Отличаются ли TSP curl p1r от них или одно и тоже но с другим названием или есть какие-то тонкости?(сам играю tsp curl p1r 1.0)
Отличаются. Эти немного мягче и не такие опасные как старые р1r. Это сугубо мое мнение. В этом видео я наверное немного поспешил с выводом, что это плохие шипы. Они не плохие, но они другие немного