This is a revolution in small-diameter deep hole drilling!

Drilled 360 holes without drill breakage.Processing time that used to take 4.5 hours at 45 seconds per hole, it has been reduced to 8 minutes at 1.3 seconds per hole, an amazing reduction in time!
Non-peck drilling by the coolant through spindle reduces processing time by 97%.
〔Drilling Data〕
▶Coolant through Drilling (CTS-2630 / EM-3030T-J)
Work material ：S50C (carbon steel)
Tool diameter ：1.0 mm
Hole depth ：20 mm through hole
L/D　　　　　　 ：20
Cutting speed ：94 m/min
Rotating speed　 ：30,000 min⁻¹
Feed rate　　　　：0.03 mm/rev
Feed speed 　　 ：900 mm/min
Coolant 　　 ：Internal Iubrication
Peck drilling cycle ：No pecking
Processing time　：1.3 sec/hole = 8 min for 360 holes
▶Conventional Drilling (NR-3060S / EM-3060J)
Work material ：S50C (carbon steel)
Tool diameter ：1.0 mm
Hole depth ：20 mm through hole
L/D　　　　　　 ：20
Cutting speed ：31 m/min
Rotating speed　 ：10,000 min⁻¹
Feed rate　　　　：0.01 mm/rev
Feed speed 　　 ：100 mm/min
Coolant 　　 ：External coolant
Peck drilling cycle ：0.5 mm
Processing time　：45 sec/hole = 4.5 h for 360 holes
■Products
　・CTS-2630
　en.nakanishi-s...
　・EM-3030T-J
　en.nakanishi-s...
■Contact Us
　en.nakanishi-s...
■English Website
　en.nakanishi-s...
#drilling #drill #s50c #processing #spindle #nakanishi #coolant #carbonsteel #highprecision #factory