Under 600fps, you can not penetrate this tin can. 400-450fps would do nothing. It stopped my air rifle pellet, mate.. then a bb with 450fps from an aeg have no chance at all.
No. I'm just using a new, longer (520mm) and tighter (6.03mm) inner barrel instead of 486mm/6.08mm factory barrel. I need to buy something (flashider or silencer) to cover the end.
i have a few air rifles, from 20J to 60 J, i treat them with the same respect as a firearm. if i shot accidentally myself with one I'd end up in ER or worse. Sadly too many people treat high powered bb guns and airguns as toys, when they're well capable of great harm to yourself or others.
Thanks for your comment! Yes, airguns are not toys. Even my weakest 0,1 Joule airsoft pistol can blind someone, so safety is always no.1 priority. After using my airguns, I always double check if they still (accidentally) loaded or not. But your airguns are in "another category" with that power, sadly, I cant get that much power here 😔
@@wlw113 I upgraded everything. - 550mm x 6.02mm steel barrel - airsoft pro gen3 hopup chamber - (I cant remember about the rubber but its a 80° rubber) - airsoftpro piston (blue) - airsoftpro steel cylinder (black) - homemade spring guide - homemade cocking handle bar - air rifle secondary (tuning) spring /stronger that M190/ - steel trigger sears Spring details: 2x12,4x270mm 1+50+1
@@keen283 I wanna put even stronger spring in it. Its working perfectly, under more than 2 years, I had no problem with the gun. I only need to retighten the screws sometimes because of the "huge" spring force.
@@airsoftvseverything Ah ok I get this wrong. Then its only 5,5j. But why then the stronger 7,5j air rifle didnt go through the can? 0,48g is not a very heavy pellet for 7,5j so the velocity must be good.
Already have m190 spring, edgi sap piston 100g, red bucking, 640mm tightbore brass inner barrel on my vsr10 but still i cannot get that fps power that u have on your m24.. any recommendation?tnx for the response
@@airsoft_hobby8253 Whats your current fps with this setup? I put washers as much as I could into the piston + I have a ~3cm long, piece of a m170 spring in it for more spring lenght. So the spring is fully compressed inside the cylinder when I cock the gun. (You need to play with the washers which is the best amount, because if you put inside too much, you will not be able to cock the gun, but if you put less, you will loose energy. I assembled and disassembled my cylinder parts at least 15 times when I reached the perfect amount of washers etc 😣 It was quite annoying and hard to put those parts togerher again and again and again with this tough m190 spring) + I have perfect air seal inside the piston and in the hopup rubber - nozzle contact point. - Dont forget to put a thin layer of oil every inner part for less friction, even on the O-ring on the piston! I hope, you changed trigger sears too? Thats the most important thing. (90° sear is better than 45°.) One more thing, if you ever reach 600+ fps, you need to retighten every screw inside your gun every 1-3 months (depends on usage) because it will "destroy" itself slowly.
@@airsoftvseverything Next time use different can for different pistols. The strength of the can was not the same once you fired a shot even on different spots.
@@airsoftvseverythinghi actually you sound very unintelligent and I can tell you failed physics so actually yes shooting a can multiple times will make it weak the entire can weaker because when it hits it it extends the metal and make it a tiny bit more skinny each shot where do you think that extra metal comes from that leaves the dent
read the rules on it, most fields limit it to 366 fps.... more and you simply get kicked out the game isnt to inflict pain on lil kids (which airsoft was MEANT FOR...
Will you ever understand I built my guns (m24, barrett) to shoot targets and not for playing? Fps limit is 600 here anyway, so I don't care about your country 366fps limit, and I can't understand what was your problem even with my ~315fps spring pistol (Colt 1911) 🤦 Get proper clothes and safety glasses/masks and airsoft will not hurt, and stop moaning, thanks! Or you have another option, sell your airsoft guns and buy lasertag 🙄
Maybe yes, would give me +1-3 fps but those barrels are much more expensive so that few fps not worth the price for me. Next thing, Im usually using 6mm steel bbs, so they may would stuck in the barrel.
this shit isn't a airsoft pistol/gun, this is a pellet gun/bb gun ,don't use it on a air soft range, it can hurt someone really bad, if you hit someone with a bb gun in a very sensitive place like a finger, most likely it will puncture the tissue
I used my upgraded Snow Wolf M24 (and other) airsoft gun(s) (6mm) in this video. Its not a 4,5mm / .177 bb gun. As 600fps (3,3J) is the limit on airsoft fields here, I cant use it obviously.
As always, useful informations are in the video description!!
2024 canned food has expired
No 7th month
IT HAS EXPIRED 5/7/2024
😂
Oh, so you can feel it.
definitely!
this is a pretty good safety gear commercial ngl
haha
Finom ez a melegszendvics krém :D
Igaz az állításod 👍😁
The day that the can expires is today, may 7th 2024 (5/7 2024)!
We using DD/MM/YY date format here. (so it will expire on 2024 July 5) :)
@@airsoftvseverything oh, where I live is MM/DD/YY example: 9/11/01, 9 is September, 11th 01 is 2001
@@clalouba2639 America?
@@airsoftvseverything well I'm in Canada, but pretty close
Oh god that’s my birthday 😮
That tin has expired today
😂
true xd
you forgot AEG M4 Riffle like 400FPS to 450FPS,. i belive also on AEG M4 power then 400FPS to 450FPS, i think it can penerate. on that can.
Under 600fps, you can not penetrate this tin can. 400-450fps would do nothing.
It stopped my air rifle pellet, mate.. then a bb with 450fps from an aeg have no chance at all.
Very scientific!
👀😁
The 700 fps if very lethal weapon can be use for self defense
So 350 fps for handgun / mid range is good enough
What meters for the range
Infos in the video description! But from "30-40cm".
Im usually shooting from close range.
Impact pellet, a penetration one would pierce for sure!
how far you shoot from?🤔
From 30-40cm (video description)
Is the rifle missing the muzzle piece?
No. I'm just using a new, longer (520mm) and tighter (6.03mm) inner barrel instead of 486mm/6.08mm factory barrel.
I need to buy something (flashider or silencer) to cover the end.
i have a few air rifles, from 20J to 60 J, i treat them with the same respect as a firearm. if i shot accidentally myself with one I'd end up in ER or worse. Sadly too many people treat high powered bb guns and airguns as toys, when they're well capable of great harm to yourself or others.
Thanks for your comment! Yes, airguns are not toys. Even my weakest 0,1 Joule airsoft pistol can blind someone, so safety is always no.1 priority. After using my airguns, I always double check if they still (accidentally) loaded or not.
But your airguns are in "another category" with that power, sadly, I cant get that much power here 😔
How you got 700fps?
@@wlw113 With magic 🪄 🫡
@@airsoftvseverything no like fr what u upgraded?
@@wlw113
I upgraded everything.
- 550mm x 6.02mm steel barrel
- airsoft pro gen3 hopup chamber
- (I cant remember about the rubber but its a 80° rubber)
- airsoftpro piston (blue)
- airsoftpro steel cylinder (black)
- homemade spring guide
- homemade cocking handle bar
- air rifle secondary (tuning) spring /stronger that M190/
- steel trigger sears
Spring details:
2x12,4x270mm 1+50+1
Man my Genesis OCW with .25g does great but that 700 FPS is just "oh hot diggy dog mode" 🤤
😄
Whats your replica's fps? (or Joule)
How Did your sniper did ou make your sniper shoot 700fps
ua-cam.com/video/Dx7tjrezgnc/v-deo.html
Try to make it go 1200 fps then it will break the sound barrier
@@johnnyghanimeh8413 not possible
With my first co2 rifle I have done it also
and whats the result?
@@airsoftvseverything a few holes 😸
0.43g power good
why is the m24 so strong? Is it gas, spring or electric?
Because, I upgraded it. Spring type.
@@airsoftvseverything did you only upgrade the springs or did you do something for the barrel too?
@@keen283 I changed every inner parts.
@@airsoftvseverything goodjob on not braking the gun!
@@keen283 I wanna put even stronger spring in it. Its working perfectly, under more than 2 years, I had no problem with the gun. I only need to retighten the screws sometimes because of the "huge" spring force.
The M24 with 0,43g pellet and 700fps has 9,8 joules
My M24 is ~525 fps with 0.43g bb.
(700+fps with 0.20g bb)
@@airsoftvseverything Ah ok I get this wrong. Then its only 5,5j. But why then the stronger 7,5j air rifle didnt go through the can? 0,48g is not a very heavy pellet for 7,5j so the velocity must be good.
@@Gieszkanne because the lead pellet is soft, airsoft plastic bb is not. 🙂
Nagyon hasznos video
köszi!
What spring r u using?
m190
Do u change ur stock inner barrel for that?
@@airsoft_hobby8253 I changed everything.
Already have m190 spring, edgi sap piston 100g, red bucking, 640mm tightbore brass inner barrel on my vsr10 but still i cannot get that fps power that u have on your m24.. any recommendation?tnx for the response
@@airsoft_hobby8253 Whats your current fps with this setup?
I put washers as much as I could into the piston + I have a ~3cm long, piece of a m170 spring in it for more spring lenght. So the spring is fully compressed inside the cylinder when I cock the gun.
(You need to play with the washers which is the best amount, because if you put inside too much, you will not be able to cock the gun, but if you put less, you will loose energy. I assembled and disassembled my cylinder parts at least 15 times when I reached the perfect amount of washers etc 😣 It was quite annoying and hard to put those parts togerher again and again and again with this tough m190 spring)
+ I have perfect air seal inside the piston and in the hopup rubber - nozzle contact point.
- Dont forget to put a thin layer of oil every inner part for less friction, even on the O-ring on the piston!
I hope, you changed trigger sears too? Thats the most important thing.
(90° sear is better than 45°.)
One more thing, if you ever reach 600+ fps, you need to retighten every screw inside your gun every 1-3 months (depends on usage) because it will "destroy" itself slowly.
You cannot use different guns on the same can. The dent on the can makes it weaker.
@@EiLSeL_OcetOs Hi! Your statement is wrong. Im not shooting the same spot all the time. It will not be weaker afrer every shot.
@@airsoftvseverything
Next time use different can for different pistols. The strength of the can was not the same once you fired a shot even on different spots.
@@EiLSeL_OcetOs It won't make any difference.
@@airsoftvseverythinghi actually you sound very unintelligent and I can tell you failed physics so actually yes shooting a can multiple times will make it weak the entire can weaker because when it hits it it extends the metal and make it a tiny bit more skinny each shot where do you think that extra metal comes from that leaves the dent
@@ArmaniRodriguez-vs8zw It doesn't extends anything. You can see dents on the can is because the metal is flattening out where the bb hit it.
read the rules on it, most fields limit it to 366 fps.... more and you simply get kicked out the game isnt to inflict pain on lil kids (which airsoft was
MEANT FOR...
Will you ever understand I built my guns (m24, barrett) to shoot targets and not for playing?
Fps limit is 600 here anyway, so I don't care about your country 366fps limit, and I can't understand what was your problem even with my ~315fps spring pistol (Colt 1911) 🤦
Get proper clothes and safety glasses/masks and airsoft will not hurt, and stop moaning, thanks!
Or you have another option, sell your airsoft guns and buy lasertag 🙄
My glock 17 has 290fps full upgrade metal
with 0.12g or 0.20g bb?
@@airsoftvseverything 0.20
thats nice!
@@airsoftvseverything its took me a while to upgrade this glock..because its need a right tuning and testing, worth it to wait for this upgrade
@@aizuddinazuha8807 I know sometimes its not easy, I wasted bit more than 1 day upgrading my cz75d compact.
And also a 6.01mm barrel would work better
Maybe yes, would give me +1-3 fps but those barrels are much more expensive so that few fps not worth the price for me.
Next thing, Im usually using 6mm steel bbs, so they may would stuck in the barrel.
M24 need to get nerfed
hehe
Holy shit the m24 is more than 10 joules?
@@Das_Red No, its 6,7Joule.
this shit isn't a airsoft pistol/gun, this is a pellet gun/bb gun ,don't use it on a air soft range, it can hurt someone really bad, if you hit someone with a bb gun in a very sensitive place like a finger, most likely it will puncture the tissue
I used my upgraded Snow Wolf M24 (and other) airsoft gun(s) (6mm) in this video. Its not a 4,5mm / .177 bb gun.
As 600fps (3,3J) is the limit on airsoft fields here, I cant use it obviously.
Please see Revelation 14:12 & 18:23, Please dont take the PCR test is alarming what peoiple have shown
what? 🤔