Introduction to MathCAD for Engineers

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ •

  • @shroogi1
    @shroogi1 6 років тому +8

    Thanks a lot, that's might be the best ever about Mathcad learning. appreciate your time sir !

  • @alexanderelea8032
    @alexanderelea8032 Рік тому +2

    My university classes are using MathCAD Prime, so following along was a little weird, but for the most part about 80% of the content you covered is common between the versions. Very helpful video, but I would definitely come back for a prime version if you published. Thank you very much!

    • @isacdaimary9908
      @isacdaimary9908 Рік тому

      Is it free?

    • @alexanderelea8032
      @alexanderelea8032 Рік тому

      @@isacdaimary9908 No, but my university provides licenses to students for use in classes. Seems mathcad prime is the only version you can get now so professors have moved on to the newer software. (School dependent obviously)

  • @KeijoAmbersson
    @KeijoAmbersson 2 роки тому +3

    Appreciate this a ton. Thank you sir!

  • @nsolanoc.
    @nsolanoc. 7 років тому +2

    Thanks for this course for ours, Chem.Engrs.

  • @XinhLe
    @XinhLe 3 роки тому +1

    Great on to review mathcad and learn other language such as python. I'm gonna try to use this as reference for doing the same thing in python to see the difference between mathcad and python.

    • @apm
      @apm  3 роки тому

      Here is a comparison: apmonitor.com/che263/index.php/Main/CompareMatlabPythonMathcad

  • @safiyagibran6193
    @safiyagibran6193 2 роки тому +1

    asked sir.
    1. I have a problem in the formulation. so some values don't connect. how to fix it?
    2. I want to change the unit from m2 to psi. but when I change it, the values are not the same and there are 2 units. how to fix it?
    Thanks for the response and explanation.

    • @apm
      @apm  2 роки тому

      This sounds like an issue for MathCAD support. I recommend going through their tutorials. The latest version is different than the one I showed.

  • @korayerman4275
    @korayerman4275 4 роки тому +4

    First of all thanks, In question 2, how could you manage to add power -2 to the paranthesis?

    • @apm
      @apm  4 роки тому +1

      You can type ^-2

  • @anachakengineer
    @anachakengineer Рік тому +1

    thanks you for your show .

  • @ahmedsayhood
    @ahmedsayhood 2 роки тому +1

    thank you a lot for the explanation!

  • @nsolanoc.
    @nsolanoc. 7 років тому

    It's time to update this course, because of the updating of the MathCad... At this moment the four point o (4.0) has arrived. And thi course is based on the 15 version.

    • @apm
      @apm  7 років тому

      We stopped teaching MathCAD and never upgraded to MathCAD prime because of the issue with backwards compatibility. A couple instructors have a little MathCAD but we've mostly moved on to Python. I agree that MathCAD 15 is antiquated.

  • @justinial1
    @justinial1 5 років тому +1

    wonderful introduction video, thanks a lot!

  • @kun_fu_taco4775
    @kun_fu_taco4775 4 роки тому +1

    Learning this in school this week. What applications will this be used for?

    • @apm
      @apm  4 роки тому

      MathCAD is good for homework-sized problems. Once you get to industrial-sized problems you'll likely need a tool like Python or Matlab.

  • @ghufranmoran8793
    @ghufranmoran8793 3 роки тому +1

    I have question in polt how i can talk with U ?

    • @apm
      @apm  3 роки тому

      I get many requests each week. I recommend you put your question here or seek help from the MathCAD provider.

  • @relanaythen572
    @relanaythen572 3 роки тому +1

    Thanks soo much, What are the purpose of these array functions?
    1-augment
    2-stack
    3-min
    4-max

    • @apm
      @apm  3 роки тому

      There is more MathCAD content on this website: apmonitor.com/che263/index.php/Main/MathcadOverview

  • @sifredovences9004
    @sifredovences9004 5 років тому

    in the example 2, "b" how come I got 16.076? but you got 18.347? , I'm confused my symbolic looks the same than yours.

    • @apm
      @apm  5 років тому

      There is probably a small difference somewhere in your sheet. I'd recommend that you go through it again.

  • @dineomoea2599
    @dineomoea2599 7 років тому +2

    Really helpful. Thanks.

  • @TheSunshineRequiem
    @TheSunshineRequiem 5 років тому

    problem 4 is incorrect, it says no number for the first one.

    • @apm
      @apm  5 років тому

      I haven't looked at this in a while. Could you suggest a correction? You may also want to consider moving to Python: apmonitor.com/che263

  • @rajni108
    @rajni108 5 років тому +1

    how can i download this
    price in rupees and dollars
    send link

    • @apm
      @apm  5 років тому

      I wouldn't recommend that you buy MathCAD. Instead, I recommend that you use Python if you are looking for a computational tool. Check out the SymPy package that can do most of the symbolic math. apmonitor.com/che263

  • @bricegreco8292
    @bricegreco8292 2 роки тому

    Could the video quality be any worse?

    • @apm
      @apm  2 роки тому

      Try setting the resolution to 1080p. UA-cam automatically reduces the quality to optimize video delivery. If you are willing to wait for the loading, you can force it to run at higher resolutions.

  • @leonardosoto5669
    @leonardosoto5669 5 років тому

    "a name is required here" how i can solve this?

    • @apm
      @apm  5 років тому

      Does this help? community.ptc.com/t5/PTC-Mathcad/quot-A-name-is-required-here-quot-error-in-defining-Table-Matrix/m-p/328831

  • @abdullahaksar9084
    @abdullahaksar9084 5 років тому

    Bro how can we do it for ciruits

    • @apm
      @apm  5 років тому

      You probably want to use a different tool for circuits like these: en.wikipedia.org/wiki/List_of_free_electronics_circuit_simulators

  • @ef7496
    @ef7496 7 років тому +1

    Thank you so much

  • @janzhang1226
    @janzhang1226 2 роки тому

    thanks a lot

  •  6 років тому

    Hi, Mathcad has something similar to the base mark I could not and could not find. Like "An", but "n" in there is a function, a base. It's like a formulator. Sample video, ua-cam.com/video/Z8CINSwDB6I/v-deo.html
    This video is performing that spelling at exactly 1:59 time. "A s" is doing. How is this done?
    ANSWER.
    Thanks.

    • @apm
      @apm  6 років тому

      You can do subscripts with a "." - In this case you would type A.s There is also the index operator that has shortcut A[s (with a open square bracket. You only want to use the index operator when you have a vector.

  • @foadsf
    @foadsf 3 роки тому

    Why not using the Free and Open source alternatives such as WxMaxima and GeoGebra? it is not cool that academics, paid by tax payers money, promote commercial products for free.

    • @clint.ontherange
      @clint.ontherange 3 роки тому

      BYU is a private school, paid by students and donors. Good try, though. Keep the dissidence alive! /s