Awesome video.The video is very helpful for us beginners, could you show us how you tune your quads and also please consider doing a 7 inch long range quad with a GPS and please show us how you set up a GPS on beta flight and how to configure return to home.Consider doing a video on how to set fail safe and how to configure smart audio in beta flight. Happy flying.Peace out.
I'd like to upgrade my transmitter to the frsky x9 lite. I have a tinyhawk and was wondering if it will bind without having to install a receiver on to the board of the drone. Gonna watch this over again when not at work lol. But any help appreciated always I'm just having a real hard time with this drone, constantly drifting on me and just feel like I'm fighting against the controls. Thanks for the video! Subscribed.
I have a question about the Eachine Novice III model. I have a question. Can you restore the factory settings in the ER8 transmitter again? Just like it came out of the factory. I mixed up a bit on the ER8 menu and now the drone does not respond to its arming (SWA Arm / Disarm)
I have the X9-Lite controller and no other hardware or drone. I just want to practice flying in VelociDrone. I keep "Failed to open serial port." Am I missing some hardware?
Hi, I have done all te setups according to your instructions. Default chanel mapping was AETR . I have installed AUX5, 6 & 7 as you. However in Betaflight these AUXs do not work. Nothing happens when I push them. Do you have any idea what can be a problem?
this is great, I'll glean what I can as I'm still new to this. I've a new taranis x lite s and I'm frustrated that it won't work with my tinyhawk s or freestyle. not without a module or adapter something something. I might return it
i have the same problem. i can not bind my tinyhawk S with my taranis x9 lite. the tinyhawk Receiver is: EMAX Tiny RX ( Compatible with Frsky D8 / D16) so if it is compatible with D16 why is not working on ACCESS D16? can someone help us? thank you
thanks for the tutorial. This is very helpfull especially when I am using old flysky transmiter. I would like to switch to frsky, because flysky receivers are not such a good as frsky ones. The next transmiter I am looking for is a x9d lite or qx7, because of price. Thanks once more!
I screwed up the channel order my first time and had to reorder the channels manually in my radio. You can change the default to aetr under main radio setup
Hi! I have taranis x9 lite and rxsr receiver. It connect, but in betaflight sticks doesn't make any movement. Follow all video and can't understand, how it connect on your quad without any movement from your site and doesn't connect on my. I have vortex 180 mini.
Dear Drone Mesh. I use mamba f405 mini mk2. And use rx r9mini fw access v1.1.1. I use sport to pin fc mamba(ppm and source softreal telemetry) I use x9lite access update with isrm v1.1.1 with module r9m lite fw access v1.1.1 And its connect. But when i fly my tx sound sensor lost. Again n again sound sensor lost.. Can u help me to fix... couse sound tx sensor lost alway.. Hopefully to replay... Thnx Drone Mesh
Hi, I have a taranis xd9 lite with xm + receiver and rxsr are well connected but in the betaflight does not make me any movement of the stick nose why can you help me?
I can not bind my tinyhawk S with my taranis x9 lite. the tinyhawk Receiver is: EMAX Tiny RX ( Compatible with Frsky D8 / D16) so if it is compatible with D16 why is not working on ACCESS D16? can someone help us? thank you
You need to flash your X9 lite to latest firmware to have ACCST D16 mode. Again some of SPI frsky receivers having random dropouts issue with D16 mode with telemetry. 1. Flash X9 lite to latest firmware 2. Try bund to D16 protocol with telemetry. 3. If you have dporouts switch off telemetry. Sometimes some whoop AIO flight controllers with SPI receivers still have dropouts, then you are not lucky and need to use D8 mode ( I have one of many my whoop like this). I'm waiting irangex module to avoid all drama about FC with spi receivers and will be able to use D8.
YOU CAN´T BIND THE XM+ RECEIVER WITH THE X9 LITE!!! Because the X9 Lite just runs with ACCES. But on the Fr Sky- Site their is no ACCES for the XM+ available. So you can´t flash the XM+ with ACCES Firmware and can´t bind with the X9 Lite!!!!!!!!!!!!!!
ultimate beginner guide. I hope you already know how to do this, i hope you already know how to do that. what do you think a beginner is? an expert? cmon man, this isnt for beginners, take the time to explain crucial information, so i wont have to click off your video. now i have to go and find another video to learn how to connect my drone to beta flight. when i click connect on beta flight, nothing happens, it flashes and just goes back to saying connected. im a beginner dude, and you just confused me even more, so id like to say, this is not the ultimate beginner guide, because a beginner will not know how to do anything.
Frsky X9-Lite: bit.ly/2LR9uxc
Frsky X-lite: bit.ly/2M0Q2z3
Frsky x9: bit.ly/2zxf28z
frsky qx 7: bit.ly/2ZGxOVL
frsky qx 7s: bit.ly/30L3ASZ
Compatible Receivers
xm+: bit.ly/2Kamywh
xsr: bit.ly/2HAoeh8
rxsr: bit.ly/33pY0Hd
New fan boy I've watched 20 of these this is the first one that truly is for someone that doesnt know pretty much anything about this which is me
I switched from a Turnigy Evo to a X-lite.... had no idea on how to bind or anything... this made it easy, Very helpful bud, thanks !!
Awesome video.The video is very helpful for us beginners, could you show us how you tune your quads and also please consider doing a 7 inch long range quad with a GPS and please show us how you set up a GPS on beta flight and how to configure return to home.Consider doing a video on how to set fail safe and how to configure smart audio in beta flight. Happy flying.Peace out.
Great tutorial, Sam! Really nice! 😃
I didn't know the difference of the X Lite to move between pages! Great to know!
Thank you for the explanation, made setting up in beta flight so much easier...again thank you!!!
Thanks drone marsh now getting into building my on quard
I'd like to upgrade my transmitter to the frsky x9 lite. I have a tinyhawk and was wondering if it will bind without having to install a receiver on to the board of the drone. Gonna watch this over again when not at work lol. But any help appreciated always I'm just having a real hard time with this drone, constantly drifting on me and just feel like I'm fighting against the controls. Thanks for the video! Subscribed.
Great video 👍
Very helpful 👍
Please can you do more like this. Thanks.
Thank you! Really helpfull! I start with this hobby :D crazy hard for beginer like me.
I love your channel , great tutorials and reviews. Thanks
Does the frsky x-9lite work with the tiny hawk s?
Are there any firmware upgrades you have to do before you bind the receivers and to get these radios going? Thank you so much...
On the receiver page, you can also edit it directly to TAER1234.
Hi, would you happen to know how i bind my lite radio 3 to that same reciever you have in this video?
Thank you for this excellent guide!
This is very help full
I have a question about
the Eachine Novice III model. I have a
question. Can you restore the factory settings in the ER8 transmitter again?
Just like it came out of the factory. I mixed up a bit on the ER8 menu and now
the drone does not respond to its arming (SWA Arm / Disarm)
check what is going on in the betaflight receivers tab
I have the X9-Lite controller and no other hardware or drone. I just want to practice flying in VelociDrone. I keep "Failed to open serial port." Am I missing some hardware?
Hi, I have done all te setups according to your instructions. Default chanel mapping was AETR . I have installed AUX5, 6 & 7 as you. However in Betaflight these AUXs do not work. Nothing happens when I push them. Do you have any idea what can be a problem?
You need to enable them in your transmitter the Mixer page
this is great, I'll glean what I can as I'm still new to this. I've a new taranis x lite s and I'm frustrated that it won't work with my tinyhawk s or freestyle. not without a module or adapter something something. I might return it
i have the same problem. i can not bind my tinyhawk S with my taranis x9 lite. the tinyhawk Receiver is: EMAX Tiny RX ( Compatible with Frsky D8 / D16) so if it is compatible with D16 why is not working on ACCESS D16?
can someone help us?
thank you
thanks for the tutorial. This is very helpfull especially when I am using old flysky transmiter. I would like to switch to frsky, because flysky receivers are not such a good as frsky ones. The next transmiter I am looking for is a x9d lite or qx7, because of price. Thanks once more!
Let me know when you decide I will get you a coupon to get 10% to 15% off.. Happy flying :)
I screwed up the channel order my first time and had to reorder the channels manually in my radio. You can change the default to aetr under main radio setup
Hi! I have taranis x9 lite and rxsr receiver. It connect, but in betaflight sticks doesn't make any movement. Follow all video and can't understand, how it connect on your quad without any movement from your site and doesn't connect on my. I have vortex 180 mini.
Lifesaver! Thank you!
Thanks a lot, this was very helpful and informative. You got a new sup👍.. Time to charge my lipo and fly 🔥🔥
Amazing video
Dear Drone Mesh.
I use mamba f405 mini mk2.
And use rx r9mini fw access v1.1.1. I use sport to pin fc mamba(ppm and source softreal telemetry)
I use x9lite access update with isrm v1.1.1 with module r9m lite fw access v1.1.1
And its connect. But when i fly my tx sound sensor lost. Again n again sound sensor lost..
Can u help me to fix... couse sound tx sensor lost alway..
Hopefully to replay...
Thnx Drone Mesh
Hi, I have a taranis xd9 lite with xm + receiver and rxsr are well connected but in the betaflight does not make me any movement of the stick nose why can you help me?
What flight controller are you using?
@@DroneMesh f4 geprc gep 12 amp aio 16x16
Hi, how to connect the taranis to betaflight?
I can not bind my tinyhawk S with my taranis x9 lite. the tinyhawk Receiver is: EMAX Tiny RX ( Compatible with Frsky D8 / D16) so if it is compatible with D16 why is not working on ACCESS D16?
can someone help us?
thank you
You need to flash your X9 lite to latest firmware to have ACCST D16 mode.
Again some of SPI frsky receivers having random dropouts issue with D16 mode with telemetry.
1. Flash X9 lite to latest firmware
2. Try bund to D16 protocol with telemetry.
3. If you have dporouts switch off telemetry.
Sometimes some whoop AIO flight controllers with SPI receivers still have dropouts, then you are not lucky and need to use D8 mode ( I have one of many my whoop like this).
I'm waiting irangex module to avoid all drama about FC with spi receivers and will be able to use D8.
please help my pich at 1511??? how do i fix it
YOU CAN´T BIND THE XM+ RECEIVER WITH THE X9 LITE!!!
Because the X9 Lite just runs with ACCES.
But on the Fr Sky- Site their is no ACCES for the XM+ available.
So you can´t flash the XM+ with ACCES Firmware and can´t bind with the X9 Lite!!!!!!!!!!!!!!
Thank you boss!
ultimate beginner guide. I hope you already know how to do this, i hope you already know how to do that. what do you think a beginner is? an expert? cmon man, this isnt for beginners, take the time to explain crucial information, so i wont have to click off your video. now i have to go and find another video to learn how to connect my drone to beta flight. when i click connect on beta flight, nothing happens, it flashes and just goes back to saying connected. im a beginner dude, and you just confused me even more, so id like to say, this is not the ultimate beginner guide, because a beginner will not know how to do anything.
I'm using an X9 Lite and a XM+. When Im looking for the RxNum screen, mine only says "02", there's no [BND] Any tips?