I’ve done quite a few of these jobs and only had to brandish the grinder once. I take almost all grout out of patios with the turbo, clean and turbo first, any hard to get bits give them a quick grind and you should save a lot of time.👍
The music that starts at 14:48 sounds like there should be some 50s crooner singing-talking like Elvis… oh baby, you know I love you, you’re the apple of my eye, I couldn’t live without you… sorry. On a more relevant note, you guys killed it with this transformation… what an awesome product too!
Just done my patio found the best way was to use a soft brush to sweep off excess , alittle harder work but i found to be a better result great video though
you could have easily lifted the loose slabs mixed a bit of cement and SBR to make a slurry and laid them back - would have held them in place quite well without having to relay them properly.
X-jet proportioners available at AC Pressure Washers individually ;) I use a strip of hose pipe to bed the compound in a little better, also making water drain away :)
Hi, just wondering if you was to do a terraced house how would you go about getting through to the back? I’m a one man band and carrying/taking through a 60kg pressure washer isn’t ideal! Thanks 👍🏻
I have a technical question, i am cleaning a driveway soon but was sealed about a year ago, can i just turbo the blocks and re seal or do i need to do something prior to cleaning?
Could you do a video on everything you would need to start up a pressure washing business now? Saw the one from 2 years ago wondering if you would use anything different surface cleaner ect?
That's still what I'd recommend if you want to start on a budget. Surface cleaner isn't necessary for machines under around 13-15LPM because you'll just be disappointed with the results.
It's all about controlling the runoff and understanding when it's at its most aggressive stage. You can mitigate the risk but pre wetting all the grass and diluting any runoff
Good job, but all that jointing compound crap doesn’t last. Learn to use sand and cement mix with plasticiser will last the customer 10 years + and maximise your profit more 👍.
I’ve done quite a few of these jobs and only had to brandish the grinder once. I take almost all grout out of patios with the turbo, clean and turbo first, any hard to get bits give them a quick grind and you should save a lot of time.👍
The music that starts at 14:48 sounds like there should be some 50s crooner singing-talking like Elvis… oh baby, you know I love you, you’re the apple of my eye, I couldn’t live without you… sorry. On a more relevant note, you guys killed it with this transformation… what an awesome product too!
Just done my patio found the best way was to use a soft brush to sweep off excess , alittle harder work but i found to be a better result great video though
you could have easily lifted the loose slabs mixed a bit of cement and SBR to make a slurry and laid them back - would have held them in place quite well without having to relay them properly.
X-jet proportioners available at AC Pressure Washers individually ;)
I use a strip of hose pipe to bed the compound in a little better, also making water drain away :)
Yes, some are upside, I myself have a huge Indian Sandstone kandler grey patio, and the edging it at an angle, The Titan is good stuff, Jenny
How many tubs did you use? And what was the square meterage?
Nicely done lads. AC sell individual proportioners now if you need a couple for your X-Jet 👍🏻
Thanks ill be picking those up!
Amazing transformation.
What was all that foam before the 50/50 hypo mix? Just curious as to why you don’t go in with the hypo alone?
Great video! How deep do you go when you clean out the grouting? Thanks.
Hi, just wondering if you was to do a terraced house how would you go about getting through to the back? I’m a one man band and carrying/taking through a 60kg pressure washer isn’t ideal! Thanks 👍🏻
I have a technical question, i am cleaning a driveway soon but was sealed about a year ago, can i just turbo the blocks and re seal or do i need to do something prior to cleaning?
Hi mate what course did you do a pure seal? As they’ve sent me over a few but in regards to learning chemical etc which one was it ? Thanks
Nice video mate
What bar and ° jets did you use on the fsc for Indian sandstone mate? Can never find the right information for it
Could you do a video on everything you would need to start up a pressure washing business now? Saw the one from 2 years ago wondering if you would use anything different surface cleaner ect?
That's still what I'd recommend if you want to start on a budget.
Surface cleaner isn't necessary for machines under around 13-15LPM because you'll just be disappointed with the results.
jake, how much does a tub cover roughly?
Quick question, do you worry about the hypo bleaching/killing the grass at all... is it something you need to consider or discuss with the customer?
It's all about controlling the runoff and understanding when it's at its most aggressive stage.
You can mitigate the risk but pre wetting all the grass and diluting any runoff
They are laid the wrong way, widest area should always be uppermost , ie bevel on the underside.
Thought so, thanks
Yo guys, I’m trying to find some sodium hypochlorite and I don’t know what brand to get, any recommendations
Pureseal 👍🏼
@@SMOUT_ cheers pal, have you ever done cement stained tarmac?? if so what have you used??
❤
Your wasting your time with angle grinder, use a mortar pic and pull it out, faster and no dust.
Interesting, can this be used on super hard mortar? And is it good for detail work?
Good job, but all that jointing compound crap doesn’t last.
Learn to use sand and cement mix with plasticiser will last the customer 10 years + and maximise your profit more 👍.