sir i have a question who will esp8266 know the real time status of Switch whether its ON/OFF which sensor is used to analysis the real time status please do guide us
Good Job Bro, First of all thanks for sharing you knowledge and educating people. Nobody shares their complete code gerber files etc. Hats off for that. Can you make a similar project without blynk, with tasmota/codes with IR remote. Your earlier project was really good, but it dont have the IR remote and Lacthed switch code...
@@TechStudyCell sir I am getting this error, what should I do /data/data/name.antonsmirnov.android.arduinodroid2/sdkEsp8266/hardware/esp8266/2.7.1/cores/esp8266/Updater.h:53:18: error: 'function' in namespace 'std' does not name a template type
Can you help me? Need a esp32/esp8266 node mcu home automation with additional EEPROM like 24C16 including Alexa Eco Dot. after the power cut, remember the last state. I think additional EEPROM has more space and rewriting capability. Thanks.
Explain plz, the old blynk could be Controlled using only a single Mobil phone wt it's hotspot to the nodemcu Control, but the new blynk needs to be connected to a separate wifi or another mobile hotspot before the phone the new blynk app is installed can function... Why is it not connecting directly wt the single phone??
Bro node mcu esp 8266 v3. is taking 5v input and operating on 3.3v then how node mcu pass 5v to 4 channel relay module ? Can we give 5v separately to both ?
GENIO!!, MUY BUENO Y MIL GRACIAS POR PONER TODO ESTE CONOCIMIENTO AL ALCANCE, ESTARIA BUENO HACER UN PROYECTO CON ESP ESTILO MESH, QUE CONTROLEN LO MISMO PERO CON DISPOSITIVOS SEPARADOS PARA INSTALACIONES A DISTANCIA Y NO CABLEAR TANTO, MUCHAS GRACIAS !!! GENIUS!!, VERY GOOD AND THANK YOU FOR PUTTING ALL THIS KNOWLEDGE ACCESSIBLE, IT WOULD BE NICE TO MAKE A PROJECT WITH ESP MESH STYLE, WHICH CONTROL THE SAME BUT WITH SEPARATE DEVICES FOR REMOTE INSTALLATIONS AND NOT WIRING SO MUCH, THANK YOU !!!
WOW , Cool project can u make it with RF Wireless controller cause i wanna make a remote controller for water air conditioner which has no remote and it should turn on and off from other room !
i use esp8266 chip but not able to connect. I hope you will make a button to push wifi connection from esp chip to add wifi password and opt, that's great
Bro I try this project but ir remote not working if ir remote serial monitor got the function decode(&results)) is deprecated and may not work as expected please help me
I have done my project , but one problem is here .... when my device is not connected through wifi.... then my remote is some second (8second) dealay works. how to fix it ? please reply me
Sir will this automation work if we do not connect temprature sensor and ir reciever...because other project without both the sensor do have some delay while operating it with buttons while wifi is not present.
Hi I Have received error on Serial Monitor for Remote Control Project using arduino. Error: use of decode(decode_results) is deprecated. use decode() instead Please Reply and Help me
Hi,subhajit you content is very great which motivated me to help you out on patron please reply me on patron. I have left a mesage for you.I would be delightful to hear reply from you
why my ir receiver option not work on esp8622 . i have tried many ways but it does not receive any signal but in Arduino uno , its work but esp8266 not work
Best fit and richest of function project I have met
The world is appreciating boss, for a great job. StudyTechcell is part of if d leading channel that's developing the Technological novice...
Best iot channel so far
Thanks
Im Interested part went dht detect temperature then the lamp turn on on/off , i have questions can this project Use for Control Temperature AC ?
can i use tsop1838 ir led for this?
Bro way of communicating with you
Perfect automation
Thanks
thanks
Welcome
Super. Sir. Ji
hello sir,
I don't have DHT11 sensor can I use thermostat sensor to know the temperature?
Good work, But how can I set a specific time to turn on a device. Example, if I want to turn on a light at 5:30pm then how can I do that?
You can add automation in Blynk IoT app as shown.
sir i have a question who will esp8266 know the real time status of Switch whether its ON/OFF which sensor is used to analysis the real time status please do guide us
Useful project... 👍
Thanks for sharing...
Welcome
Bro please make a video for submersible pump automation blynk iot
I loved your projects 10/10
Thanks
Can i use a infrared sensor instead of dht 11
Good Job Bro, First of all thanks for sharing you knowledge and educating people. Nobody shares their complete code gerber files etc. Hats off for that.
Can you make a similar project without blynk, with tasmota/codes with IR remote. Your earlier project was really good, but it dont have the IR remote and Lacthed switch code...
Noted... Thank you.
@@TechStudyCell sir I am getting this error, what should I do
/data/data/name.antonsmirnov.android.arduinodroid2/sdkEsp8266/hardware/esp8266/2.7.1/cores/esp8266/Updater.h:53:18: error: 'function' in namespace 'std' does not name a template type
When the current goes off and comes back on, all the bulbs that were off turn on. What do you do about it??? 👈👈👈
Can we change ssid and pw without any coding?
How to use pull up resistor
Can you help me? Need a esp32/esp8266 node mcu home automation with additional EEPROM like 24C16 including Alexa Eco Dot. after the power cut, remember the last state. I think additional EEPROM has more space and rewriting capability. Thanks.
Please can you send the same project PIR sensor without the IR receiver
I decibel the time and I always control with IR remote and Google.
and the projects are great
Please make video on how to flash esp32 and esp8266
Explain plz, the old blynk could be Controlled using only a single Mobil phone wt it's hotspot to the nodemcu Control, but the new blynk needs to be connected to a separate wifi or another mobile hotspot before the phone the new blynk app is installed can function... Why is it not connecting directly wt the single phone??
hi good project. can i use same project in ESP8266 D1 Mini(wemos D1) ?
Good job ❤
Thanks 😅
Bro node mcu esp 8266 v3. is taking 5v input and operating on 3.3v then how node mcu pass 5v to 4 channel relay module ?
Can we give 5v separately to both ?
GENIO!!, MUY BUENO Y MIL GRACIAS POR PONER TODO ESTE CONOCIMIENTO AL ALCANCE, ESTARIA BUENO HACER UN PROYECTO CON ESP ESTILO MESH, QUE CONTROLEN LO MISMO PERO CON DISPOSITIVOS SEPARADOS PARA INSTALACIONES A DISTANCIA Y NO CABLEAR TANTO, MUCHAS GRACIAS !!!
GENIUS!!, VERY GOOD AND THANK YOU FOR PUTTING ALL THIS KNOWLEDGE ACCESSIBLE, IT WOULD BE NICE TO MAKE A PROJECT WITH ESP MESH STYLE, WHICH CONTROL THE SAME BUT WITH SEPARATE DEVICES FOR REMOTE INSTALLATIONS AND NOT WIRING SO MUCH, THANK YOU !!!
WOW , Cool project can u make it with RF Wireless controller cause i wanna make a remote controller for water air conditioner which has no remote and it should turn on and off from other room !
Really Great!!! Thank You! Is it possible to do this project with 433 mhz?
Hello, that's an excellent project, how to do this process with Google assistant v2?
Bro please design a pcb for this to use directly on AC supply 220volts without 5v additional power supply
You are doing a great work please can you use esp32 for this project
Thanks,...Already published. Please check previous video
Automation option is not showing in BLYNK IOT platform. What may be the reason, could you please explain 🙁
ir remote no working with this when i connect ir recv with nodemcu then blynk goes off line so what i do?
Have you used 1838 ir receiver with metal case? Otherwise it will not work.
@@TechStudyCell i have same ir rccv model but still not working. Can i used an other opation like a ir rcv module is that work?
i use esp8266 chip but not able to connect. I hope you will make a button to push wifi connection from esp chip to add wifi password and opt, that's great
excelent vedio
thanks bro
Esp8266 stops responding after 15-20mins I've changed power adapter to 5v 2amp still issue is there, any suggestions?
Automation option is not showing in ky blynk cloud or app
I want to program esp8266 with my phone. please tell me 🙏.
Goud job frend
Can we add multiple esp8266 with Arduino iot cloud like blynk please reply
Question: Is it possible to use this project with 5 volts and 12 volts DC ❓?
Same question
yes
Yes I am using this example to
Control led stripe
how to make this project on RF 433
Super excited brother more
If i want to push any button ON and then other button OFF,Like table fan button
How do i change ?
I tried with a VS1838 and it didn't work :(
Bro I try this project but ir remote not working if ir remote serial monitor got the function decode(&results)) is deprecated and may not work as expected please help me
Bro I want to do this with pcb assembly can you please share BOM and CPL file
What if I want to turn all the buttons on at once, as if all the switches are turned off with one button. This is what I need.
Hi can you add fan regulator
sir relay is not controlling through ir remote help
sir can u make 72v battery auto cut off circuit
could you do the same but with an arduino Mega?🥺
I have done my project , but one problem is here .... when my device is not connected through wifi.... then my remote is some second (8second) dealay works. how to fix it ? please reply me
Esp32 bluetooth wifi 2 in mit inventor app
Please make video
Good job bro... Voltage and Amps, monitoring with temperature, soil moisture , eeprom relay model opiate esp 32
Could you please put a link to the sketch here?
Please download from the article. Link is in description
Boss how i can reset to default my ESP8266 please tell me it's not showing in wifi signal
bro ir sensor not work for me i change hex code for remote also
8 relays control with node mcu
Sir, I have tried almost all troubleshooting but still unable to figure out why IR Switch is not working. Please help or make a separate video.
Same pblm
hey can you do ESP8266 Project using Google Assistant Blynk with Timer, Sensor and IR control.
Funciona con alexa?
pretty cool
Thanks
SD3 pin is not working; how to use this as GPIO?
SD3 AND SD2 PIN NOT WORKING
SOLUTION PLEASE
I really like your very useful project, thank you.!
RF module pr Kuchh bnao
I have an doubt
👏👏👏
req video tutorial add remote use esp8266 sir
Sir coming error, error compiling for board nodemcu 1.0(ESP-12E Module) sir please reply me . and send me solutions of this error . please 🙏🙏🙏🙏sir
update the board and Blynk library
Ok sir, thank you so much. I am your big fan sir 🤝🤝 keep it up 👍
@@TechStudyCellhow??
I need your help
let me know here
IR receiver ont working
SD2. SD3 not working
This version cannot be updated. If you change the password, you can update and change the code accordingly
Esp32 wifi and bluetooth
Mit app inventor android app
Make video sir please
Which software is used to design circuit as shown in the video..?
can we use solid State relays instead of normal relay???
Sir will this automation work if we do not connect temprature sensor and ir reciever...because other project without both the sensor do have some delay while operating it with buttons while wifi is not present.
Hi
I Have received error on Serial Monitor for Remote Control Project using arduino.
Error:
use of decode(decode_results) is deprecated. use decode() instead
Please Reply and Help me
Ignore that. It will not impact the performance
Pcb board price
Please send email to connect.techstudycell@gmail.com
I have problem in uploading code. ( BlynkEdgent.h : no such file or directory) please help to solve this problem
Please install or update the Blynk library
@@TechStudyCell Thank you
Sir i have updated the whol library but still the error did not fixed.
Blynk Not connected
Perfect, but timer is not going to work when there is no wifi.
Yes. That is a limitation.
Hindi ma bolo
Pls send me code bro
You can get it from description
Sir aap se nivedan hai ki yah circuit banaye please 🙏🙏
ua-cam.com/video/ckmM-8gvnLI/v-deo.html
Hi,subhajit you content is very great which motivated me to help you out on patron please reply me on patron. I have left a mesage for you.I would be delightful to hear reply from you
why my ir receiver option not work on esp8622 . i have tried many ways but it does not receive any signal but in Arduino uno , its work but esp8266 not work
Circuit is restarting if IR receiver is connected
Help